ADLINK Technology Express-BASE Bedienungsanleitung

Express-BASE

User’s Manual

Manual Revision: 2.30

Revision Date: July 6, 2011

Part Number: 50-1J012-1030

Express-BASE User’s ManualPage 2

Revision History

Release Date Change

2.00 2006/9/15 Initial Release

2.10 2007/10/19 Updated ETXexpress/Express name changes

2.20 2009/03/05 Updated Engineering Specifications (B2)

Updated company contact information

2.21 2010/06/11 Updated to D1 PCB version

(compatible with PICMG COM Express Carrier Design Guide)

2.30 2011/07/06 Updated to D2 PCB version: Removed TV-out, extended power

connectors; added LVDS panel control header and jumpers, SPI BIOS

socket and Secondary BIOS instructions,ATX 12V 4-pin connector, ATX

power connector info

Page 3Express-BASE User’s Manual

Table of Contents

Preface ............................................................................................................................5

1 Introduction...............................................................................................................7

2 Special Features .......................................................................................................8

2.1 Primary LPC based Super I/O...............................................................................................8

2.2 Secondary BIOS ...................................................................................................................8

2.3 Integrated Debug Port with Single Step Execution ...............................................................8

2.4 OnboardAudio......................................................................................................................8

2.5 Information LEDs ..................................................................................................................8

3 Component Location................................................................................................9

4 Function Block Diagram ........................................................................................10

5 Mechanical Dimensions......................................................................................... 11

6 Connectors and Pin-outs.......................................................................................12

6.1 Carrier Board Signals..........................................................................................................12

6.2 Connector and Pinout Compatibility....................................................................................12

6.3 Carrier Board Design ..........................................................................................................12

6.4 COM Express Board-to-Board Connectors.........................................................................13

6.5 PCI Express and PCI Express Graphic (PEG) Slots...........................................................15

6.6 PCI Slots.............................................................................................................................18

6.7 LPC Debug .........................................................................................................................19

6.8 I2C and SMB Bus (for user access)...................................................................................20

6.9 USB and LAN......................................................................................................................22

6.10 Audio...................................................................................................................................23

6.11 VGA, LVDS .........................................................................................................................24

6.12 LVDS Jumper Settings........................................................................................................25

6.13 Keyboard & Mouse .............................................................................................................26

6.14 Serialand IrDA Ports ..........................................................................................................26

6.15 Parallel Port ........................................................................................................................27

6.16 Storage: SATA, PATA, FDD, CF..........................................................................................27

6.18 Power Connectors ..............................................................................................................30

Express-BASE User’s ManualPage 4

6.19 Power Jumper Settings.......................................................................................................32

6.17 Other Connectors................................................................................................................33

6.20 Other Jumper Settings........................................................................................................35

7 Secondary BIOS......................................................................................................37

7.1 FWH Secondary BIOS - COM.0 Rev. 1.0 ...........................................................................37

7.2 SPI Secondary BIOS - COM.0 Rev. 2.0..............................................................................38

8 Switches, POST, LEDs & Power ............................................................................39

8.1 On/Off and RESET .............................................................................................................39

8.2 POST & Module Type Display.............................................................................................39

8.3 Indicator LEDs ....................................................................................................................40

8.4 Digital I/O LEDs ..................................................................................................................40

8.5 ATX Power Connectors.......................................................................................................41

8.6 AT Power Mode ..................................................................................................................42

Important Safety Instructions .....................................................................................43

Getting Service.............................................................................................................44

Page 5Express-BASE User’s Manual

Preface

This document contains proprietary information protected by copyright.All rights are reserved. No

part of this manual may be reproduced by any mechanical, electronic, or other means in any form

without prior written permission of the manufacturer.

Disclaimer

The information in this document is subject to change without prior notice in order to improve

reliability, design, and function and does not represent a commitment on the part of the manufac-

turer.

In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential

damages arising out of the use or inability to use the product or documentation, even if advised

of the possibility of such damages.

Environmental Responsibility

ADLINK is committed to fulfill its social responsibility to global environmental preservation

through compliance with the European Union's Restriction of Hazardous Substances (RoHS)

directive and Waste Electrical and Electronic Equipment (WEEE) directive. Environmental

protection is a top priority forADLINK. We have enforced measures to ensure that our products,

manufacturing processes, components, and raw materials have as little impact on the

environment as possible. When products are at their end of life, our customers are encouraged to

dispose of them in accordance with the product disposal and/or recovery programs prescribed by

their nation or company.

Trademarks

COM Express™ and PICMG® are registered trademarks of the PCI Industrial Computer

Manufacturers Group.

Product names mentioned herein are used for identification purposes only and may be trade-

marks and/or registered trademarks of their respective companies.

Express-BASE User’s ManualPage 6

Conventions

Take note of the following conventions used throughout this manual to make sure that users

perform certain tasks and instructions properly.

Additional information, aids, and tips that help users perform tasks.

Information to prevent minor physical injury, component damage, data loss,

and/or program corruption when trying to complete a task.

Information to prevent serious physical injury, component damage, data

loss, and/or program corruption when trying to complete a specific task.

Page 7Express-BASE User’s Manual

1Introduction

The COM Express approach of custom carrier combined with off the shelf system cores is an

excellent solution when you need to customize but lack the time or quantity for a complete

redesign. It fits most system integration projects with production volumes from 500 to 10,000 pcs

per year. The COM Express concept has a great many advantages over full custom designs, it

reduces engineering complexity, lowers the threshold for total project quantity and last but not

least brings your product to the market in no time. The average time to design a carrier board is

less than half the time of a full custom OEM board.

Express-BASE is a standardATX size carrier board. Together with the COM Express module of

your choice and off the shelf add-on cards you can quickly emulate the functionality of your

desired end product for software development and hardware verification.

To build a functional prototype of your target system you will need:

fCOM Express module

fExpress-BASE carrier board

fPCI Express or PCI add on cards

fPATA/ SATAstorage or Flash disk solution

The Express-BASE is compatible with Basic and Compact form factor Type 2 pinout COM

Express modules and accommodates up to five PCI Express x1 slots, one PCI Express Graphics

x16 slot, one ExpressCard slot and two PCI slots.

The Express-BASE is based on the PICMG COM Express™ (COM.0 Rev. 2.0) specification and

is compatible with the PICMG COM Express™ Carrier Design Guide (see 6.3 Carrier Board

Design on page 12).

Express-BASE User’s ManualPage 8

2Special Features

2.1 Primary LPC based Super I/O

COM Express modules do not have a Super I/O chip onboard as this is considered legacy.

Therefore, a Super I/O is placed on the carrier board as an optional item. The Express-BASE

uses a Winbond W83627HG-AW that supports FDD, LPT, COM and PS/2 Keyboard and Mouse.

2.2 Secondary BIOS

The Express-BASE using firmware hub (FWH) for COM.0 Rev. 1.0 modules and Serial Peripheral

Interface (SPI) for COM.0 Rev. 2.0 modules. Selection of active BIOS can be made by jumper

setting.

2.3 Integrated Debug Port with Single Step Execution

In addition to a two-digit POST code display, the board also provides a four-digit address display.

By jumper selection the board can be switched into single step BIOS execution mode. Steps are

executed using a manually operated onboard mini switch.

2.4 Onboard Audio

The Express-BASE has a RealtekALC888 audio codec onboard.Audio I/O is provided by a six-

jack connector.

2.5 Information LEDs

General information is obtained through signaling LEDs for HDD, Power and Watchdog status.

Additionally the Express-BASE gives information about module types being plug into the board.

See 8.2 POST & ModuleType Display on page 40 and 8.3 Indicator LEDs on page 41.

Page 9Express-BASE User’s Manual

3Component Location

88 88

SW3 SW1

JP6

CN37

JP5

CN33

CN29

CN28

CN25

CN43

CN26 CN24 CN19 CN18

CN8CN10CN14

U14

JP2

CN15

CN13

CN12

CN11

CN17

CN9

PCIE7

PCI2

PCIE1

PCIE2

PCIE4

PCIE5

PCIE3

PCIE6

CN40

LED15

LED16

LED17

LED18

LED19

SW2

JP1

LED9 LED10 LED11 LED12

LED14LED13

CN30

CN31

CN32

JP8

JP7

JP4

CNY8

CNY5

CNY9 CN35

CN21

CN20

CN4

CN3

CN6

CN5

CN7

CN1

CN16

CNZ1

LED20

LED2

LED21

CNY6

JPY11

JPY3

JPY2

JPY5

JPY4

CNY1

JPY9

JPY10

CNY4

JPY13

JPY12

JPY14

JPY1

JPY8

CNY7

JPY7 JPY6

CNY2

CNY3

Winbond

W83627HG-AW

ALC

883

CN2

LEDX8 – X1

PCIA1

JPA2

JPA4

JPA3

JPA5

JPA6

JPA1

CN42

CN41

JP3

JPZ2

JPZ1

JPZ3

UZ3

CNZ2

JPZ5

JPZ4

51-46604-0D20

Express-BASE

Express-BASE User’s ManualPage 10

4Function Block Diagram

LPC

W83627HG

Primary

Super I/O

LPT1

COM1

COM2

FDD

POST Code

Display

PCI Express

6x USB on Rear I/O

1x USB on header

ALC888

Codec Audio on

Rear I/O

KB/MS

USB

Debug Header

SATA 4 onboard

SATA headers

Secondary

BIOS

Express

Card

CRT VGA

Rear I/O

LVDS

headers

Gigabit

Ethernet

Rear I/O

PCI Express

Graphics x16

PCI Express x16

onboard slot

PATA

Onboard IDE

Connector

32-bit PCI

PCI

Inhaltsverzeichnis

Andere ADLINK Technology Computerhardware Handbücher

ADLINK Technology

ADLINK Technology cPCI-3620 Series Bedienungsanleitung

ADLINK Technology

ADLINK Technology cPCI-9116 Bedienungsanleitung

ADLINK Technology

ADLINK Technology HPERC-KBL-MC Bedienungsanleitung

ADLINK Technology

ADLINK Technology arm AMPERE COM-HPC-ALT Bedienungsanleitung

ADLINK Technology

ADLINK Technology cPCI-8586 Bedienungsanleitung

ADLINK Technology

ADLINK Technology CM5-P1000 Bedienungsanleitung

ADLINK Technology

ADLINK Technology cPCI-A3515 Series Bedienungsanleitung

ADLINK Technology

ADLINK Technology PCI-3488 Bedienungsanleitung

ADLINK Technology

ADLINK Technology SMARC NXP LEC-IMX8M Bedienungsanleitung

ADLINK Technology

ADLINK Technology HPERC-IBR-MC Bedienungsanleitung

ADLINK Technology

ADLINK Technology aTCA-80606PA Bedienungsanleitung

ADLINK Technology

ADLINK Technology cPCI-6765 Bedienungsanleitung

ADLINK Technology

ADLINK Technology MXE-5401 Bedienungsanleitung

ADLINK Technology

ADLINK Technology EGX-MXM-A1000 Bedienungsanleitung

ADLINK Technology

ADLINK Technology COM Express cExpress-BL Bedienungsanleitung

ADLINK Technology

ADLINK Technology DLAP-211-JNX Series Bedienungsanleitung

ADLINK Technology

ADLINK Technology SMARC MODULE LEC-EL Betriebsanleitung

ADLINK Technology

ADLINK Technology cPCI-7300A Bedienungsanleitung

ADLINK Technology

ADLINK Technology 10GbE BASE-T Bedienungsanleitung

ADLINK Technology

ADLINK Technology nanoX-TCR Bedienungsanleitung

ADLINK Technology

ADLINK Technology DIN-1040 Bedienungsanleitung

ADLINK Technology

ADLINK Technology cPCIS-1100 Series Bedienungsanleitung

ADLINK Technology

ADLINK Technology cExpress-AR Bedienungsanleitung

ADLINK Technology

ADLINK Technology nanoX-EL Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

AMD

AMD Phenom II Betriebshandbuch

Intel

Intel NUC 12 Pro Bedienungsanleitung

dbx

dbx Zone Pro 1260 Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung