ADT DSC 9047 Bedienungsanleitung

For a detailed review of the entire system, please view the DSC 9047 system manual.

Arm and Disarm

Arm:

To arm all sensors in AWAY mode when you are leaving the premises, press and hold the [AWAY] key

for two seconds, or enter your [security code] and exit before the exit delay expires.

To arm all sensors in STAY mode without interior sensors armed, press and hold the [STAY] key for

two seconds, or enter your [security code] and do not leave the premises.

Disarm:

To disarm, enter your [security code] before the entry delay expires.

Battery

The DSC Power Series 9047 operates on the 7.2V Battery Pack.

Loss of AC power and use of backup battery power is indicated by NO AC.

A low battery condition is indicated by Low Bat.

For instructions on replacing your battery, please visit our Battery Replacement Page.

Quick Guide:

DSC 9047

Bypassing Protected Areas

Bypassing a zone allows you to arm your system with certain protected areas intentionally unarmed or to

access a protected area when the system is armed.

To bypass a zone, the function menu by pressing [*] again to reach [Zone Bypass].

Press either [1] or [*], then your [security code].

Enter the zone number to be bypassed or use the [<] [>] keys to locate the zone number + [*]

When a zone is correctly bypassed, a [B] will appear next to the zone number on the display.

Press [#] to exit.

To unbypass, repeat the bypass procedure on arm and disarm your system.

Change Date and Time

To change date and time:

Press [*] + [6] + [Master security code] + [1].

Use the [<] [>] to find the [Time and Date] menu option, then press [*] to select.

Enter the minutes and hours in 24-hour format, i.e., 16:34 for 4:45 pm.

Enter the date, months, and year in MM:DD:YY format, i.e., 082317 for August 13, 2017.

Press [#] to exit.

Chimes and Beeps

When your system is in chime mode, a chime alert will sound three tones whenever a protected door/window

is opened.

To turn chime mode on and off, hold [CHIME] for several seconds or press [*] + [4].

Reset

To clear the display after an alarm event, arm and disarm your system.

Security Codes

Your system allows for up to 16 additional users, however only the Master user can program user codes and

attributes.

To program a new user, press [*] + [5] + [Master security code].

Enter the two-digit number to be programmed, i.e., 06 for Access Code 6.

Enter the new user’s new code.

Continue adding additional user codes or press [#] to exit.

To erase an access code, press [*] + [5] [Master code] + [user access code] + [*].

Press [#] to exit.

Trouble Conditions

When a Trouble Condition is detected, the word ‘FAULT’will be displayed on the panel.

To view the Trouble Condition, press [*] + [2] and use the [<] [>] to scroll.

To silence the Trouble Condition beeps, press [#].

Volume

To adjust the buzzer volume level, press [*] + [6] + [Master code].

Use the [<] [>] keys to scroll to [Buzzer Control] and then press [*].

Once the desired volume has been selected, press [#] to save the selection.

Inhaltsverzeichnis

Andere ADT Sicherheitssystem Handbücher

ADT

ADT ADT2X16AIO Montageanleitung

ADT

ADT 3G Cellular Medical Alert System Bedienungsanleitung

ADT

ADT DSC Impassa Bedienungsanleitung

ADT

ADT Safewatch Pro 3000 Benutzerhandbuch

ADT

ADT Security System 4112 Bedienungsanleitung

ADT

ADT Safewatch Plus Enterpreneur Security Systems Bedienungsanleitung

ADT

ADT FOCUS CADET Bedienungsanleitung

ADT

ADT BHS-3000C Bedienungsanleitung

ADT

ADT ADT7AIO Series Gebrauchsanweisung

ADT

ADT Ademco Vista 20 Bedienungsanleitung

ADT

ADT ADT7AIO Series Montageanleitung

ADT

ADT Safewatch Quick Connect Plus Bedienungsanleitung

ADT

ADT IGB-02 Bedienungsanleitung

ADT

ADT Safewatch Pro 2000 Bedienungsanleitung

ADT

ADT Keychain Remote Bedienungsanleitung

ADT

ADT Security System 4112 Bedienungsanleitung

ADT

ADT Ademco Vista 20P/PSIA Bedienungsanleitung

ADT

ADT ADT7AIO Series Gebrauchsanweisung

ADT

ADT ACCORD XPC Bedienungsanleitung

ADT

ADT SAFEWATCH EZ Bedienungsanleitung

ADT

ADT Smart Home PM360 Bedienungsanleitung

ADT

ADT SA10ADTEG Bedienungsanleitung

ADT

ADT Galaxy 8 Bedienungsanleitung

ADT

ADT Safewatch QuickConnect Plus Betriebsanleitung

Beliebte Sicherheitssystem Handbücher anderer Marken

Inner Range

Inner Range Concept 2000 Bedienungsanleitung

Climax

Climax Mobile Lite R32 Montageanleitung

CADDX

CADDX NX-6 Bedienungsanleitung

FBII

FBII XL-31 Series Bedienungsanleitung

Johnson Controls

Johnson Controls PENN Connected PC10 Bedienungsanleitung

Aeotec

Aeotec Siren Gen5 Bedienungsanleitung

Blaupunkt

Blaupunkt SA 2700 Bedienungsanleitung

IDEAL

IDEAL Accenta Betriebsanleitung

AJAX

AJAX DoubleButton Bedienungsanleitung

Swann

Swann SW-P-MC2 Bedienungsanleitung

Ecolink

Ecolink Siren+Chime Bedienungsanleitung

Digital Monitoring Products

Digital Monitoring Products XR150 Bedienungsanleitung

EDM

EDM Solution 6+6 Wireless-AE Bedienungsanleitung

Highway Safety Group

Highway Safety Group EA401 Bedienungsanleitung

Siren

Siren LED GSM Bedienungsanleitung

Detection Systems

Detection Systems 7090i Montageanleitung

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung

Siemens

Siemens FDM273 Bedienungsanleitung