ADT Smart Home PM360 Bedienungsanleitung

QUICK CONSUMER

REFERENCE GUIDE

Your System: ADT

Smart Home

Keyholder Response

Starting to use the Keypad, ADT

Smart Home

App and web portal

Setting your System using your keypad

Step 1

When leaving your home ensure that all protected doors/windows, including your

front door, are closed before setting your System.

Step 2

Set your System using The Keypad – by pressing the “set” key on the Keypad and

entering your 4-Digit User Code / or presenting your Keyfob.

Step 3

You will hear 30 seconds of Intermittent beeping to remind you to leave the property

via your specied exit route. You have to leave your property and close the exit door

during this 30 second time period

Step 4

After this 30 second time period, the beeping stops, and your system is successfully

set.

PM360 Alarm Panel Keypad KeyFob ADT Smart Home

Web Portal

ADT Smart Home

App

Setting your System with the ADT

Smart Home

App

Step 1

When leaving your home ensure that all protected doors/windows, including your

front door, are closed before setting your System.

Step 2

From your Smart Phone, launch the

ADT Smart Home App, enter your

Contract Number into the eld

Username, enter your Password,

and press Connect.

Step 3

By default, the rst screen displayed after login is the Security

screen. The Security screen is used to set, part set or unset

the ADT Smart Home Alarm Panel.

Click on button Set.

Step 4

A 30 second exit delay countdown is displayed, this is the

time left for leaving your home before the alarm panel

is actually set.

Step 5

At the end of the countdown, the Lock icon becomes red,

indicating that the alarm panel is set.

Setting your System with the ADT

Smart Home

Web Portal

Step 1

From your favourite web browser, enter the

URL of the ADT Smart Home Web Portal:

https://www.adt.co.uk/smart-home/selfcare

Step 2

Enter your Contract Number into the eld Username, enter your Password, and press

Go.

Step 3

By default, the rst screen displayed after

The three buttons UNSET, PARTIAL SET

and SET at the top of the dashboard panel

are used to respectively set, part set or

unset the ADT Smart Home Alarm Panel.

Click on button SET.

Step 4

A 30 second exit delay countdown is

displayed, this is the time left for leaving

your home before the alarm panel is

actually set.

Step 5

After a few seconds, the Lock icon

becomes red, indicating that the

ADT Smart Home panel is set.

Unsetting your System using your keypad

The System unsetting starts as soon as you open your entry door or enter a protected

zone which activates the System.

Step 1

Enter your home via your specied entry route.

Step 2

Unset your System using the Keypad – by pressing the “unset” key on the

Keypad and entering your 4-Digit User Code / or presenting your Keyfob.

Step 3

You will hear a beep from the Keypad or Alarm Panel conrming that your System is

successfully unset.

Important: Unsetting the alarm stops the Internal Sounder ringing should the Alarm

be activated but will not interrupt the transmission of the alarm signal to the ADT

Alarm Monitoring Centre.

Unsetting your System with the ADT

Smart Home

App

Step 1

From your Smart Phone, launch the

ADT Smart Home App, enter your

Contract Number into the eld Username,

enter your Password, and press Connect

Step 2

By default, the rst screen displayed after login

is the Security screen. The Security screen is

used to set, part set or unset the ADT Smart Home

Alarm Panel.

Click on button Unset.

Step 3

Unsetting the alarm system requires entering

your account password

Then click on Yes.

Important: If you have ngerprint scanner technology

available on your device you will be prompted to use

your ngerprint to conrm the unsetting of your alarm.

If you do not have ngerprint scanner technology,

please follow the steps above and use your password

to unset the alarm.

Step 4

After few seconds, the Lock icon becomes green,

indicating that the ADT Smart Home panel is unset.

Unsetting your System with the ADT

Smart Home

Web Portal

Step 1

From your favourite web browser, enter the URL

of the ADT Smart Home Web Portal:

https://www.adt.co.uk/smart-home/selfcare

Step 2

Enter your Contract Number into the eld Username, enter your Password, and press

Go.

Step 3

By default, the rst screen displayed after

The three buttons UNSET, PARTIAL SET

and SET at the top of the dashboard

panel are used to respectively set, part

set or unset the ADT Smart Home

Alarm Panel.

Click on button UNSET.

Step 4

After a few seconds, the Lock icon

becomes green, indicating that the

ADT Smart Home panel is unset.

Part-setting your System using your keypad

Part-setting allows you to protect part/s of your property when you are at home. For

example, protecting the downstairs area whilst you are sleeping upstairs. The part-

set option can be programmed to your System during your System installation or a

service visit.

Step 1

Part-set your System using the Keypad – by pressing the “part-set” key on the

Keypad and entering your 4-Digit User Code / or presenting your Keyfob.

Step 2

Your System is now part-set.

Part-setting your System with the ADT

Smart Home

App

Step 1

If leaving your home or not, ensure that all protected doors/windows in the protected

area, including your front door, are closed before part setting your System.

Step 2

From your Smart Phone, launch the

ADT Smart Home App, enter your

Contract Number into the eld Username,

enter your Password, and press Connect.

Part-setting your System with the ADT

Smart Home

App

Step 3

By default, the rst screen displayed after login is

the Security screen. The Security screen is used

to set, part set or unset the ADT Smart Home

Alarm Panel.

Click on button Partial Set.

Step 4

A 30 second exit delay countdown is displayed,

this is the time left for leaving your home, or leaving

the home areas protected by the peripheral security

sensors, before the alarm panel is partial set.

Step 5

At the end of the countdown, the Lock icon becomes

yellow, indicating that the alarm panel is partial set.

Part-setting your System with the ADT

Smart Home

Web Portal

Step 1

From your favourite web browser, enter the URL

of the ADT Smart Home Web Portal:

https://www.adt.co.uk/smart-home/selfcare

Step 2

Enter your Contract Number into the eld Username, enter your Password, and press

Go.

Step 3

By default, the rst screen displayed

after login is the Security Dashboard

screen. The three buttons UNSET,

PARTIAL SET and SET at the top of

the dashboard panel are used to

respectively set, part set or unset

the ADT Smart Home Alarm Panel.

Click on button PARTIAL SET.

Step 4

A 30 second exit delay countdown

is displayed, this is the time left for

leaving your home or leaving the

home areas protected by the

peripheral security sensors, before

the alarm panel is partial set.

Step 5

After a few seconds, the Lock icon

becomes yellow, indicating that

the ADT Smart Home panel is

partial set.

Resetting/Silencing your System after an alarm

To stop the Alarm sounding using the Keypad – by pressing the “unset” key

and entering your 4-Digit User Code /or presenting your Keyfob.

Important: Resetting/Silencing your System stops the Internal Sounder ringing but

will not interrupt the transmission of the alarm signal to the ADT Alarm Monitoring

Centre. Our monitoring specialists may contact you at this point and you will be

requested to conrm your Verication Code /Password to cancel the alarm alert. Your

System might be required to be reset remotely

Inhaltsverzeichnis

Andere ADT Sicherheitssystem Handbücher

ADT

ADT Safewatch Quick Connect Plus Bedienungsanleitung

ADT

ADT On-The-Go Emergency Response System Bedienungsanleitung

ADT

ADT EZ Montage- und Bedienungsanleitung

ADT

ADT Ademco Vista 20P/PSIA Bedienungsanleitung

ADT

ADT SASW3000EN Bedienungsanleitung

ADT

ADT K5309V2 Bedienungsanleitung

ADT

ADT 6160VPADT Montageanleitung

ADT

ADT DSC Impassa Bedienungsanleitung

ADT

ADT Fall Detection Pendant Bedienungsanleitung

ADT

ADT Safewatch Plus Entrepreneur Bedienungsanleitung

ADT

ADT BHS-3000C Bedienungsanleitung

ADT

ADT Safewatch Pro 3000 Bedienungsanleitung

ADT

ADT BHS-4000A Bedienungsanleitung

ADT

ADT ADT7AIO Series Gebrauchsanweisung

ADT

ADT SAFEWATCH PRO Bedienungsanleitung

ADT

ADT On-The-Go Bedienungsanleitung

ADT

ADT FOCUS CADET Bedienungsanleitung

ADT

ADT Garda Response PM30 Bedienungsanleitung

ADT

ADT SA10ADTEG Betriebsanleitung

ADT

ADT ADTHYBWL Series Bedienungsanleitung

ADT

ADT 3G Cellular Medical Alert System Bedienungsanleitung

ADT

ADT Safewatch Plus Enterpreneur Security Systems Bedienungsanleitung

ADT

ADT BHS-3000C Bedienungsanleitung

ADT

ADT Security System 4112 Bedienungsanleitung

Beliebte Sicherheitssystem Handbücher anderer Marken

Inner Range

Inner Range Concept 2000 Bedienungsanleitung

Climax

Climax Mobile Lite R32 Montageanleitung

CADDX

CADDX NX-6 Bedienungsanleitung

FBII

FBII XL-31 Series Bedienungsanleitung

Johnson Controls

Johnson Controls PENN Connected PC10 Bedienungsanleitung

Aeotec

Aeotec Siren Gen5 Bedienungsanleitung

Blaupunkt

Blaupunkt SA 2700 Bedienungsanleitung

IDEAL

IDEAL Accenta Betriebsanleitung

AJAX

AJAX DoubleButton Bedienungsanleitung

Swann

Swann SW-P-MC2 Bedienungsanleitung

Ecolink

Ecolink Siren+Chime Bedienungsanleitung

Digital Monitoring Products

Digital Monitoring Products XR150 Bedienungsanleitung

EDM

EDM Solution 6+6 Wireless-AE Bedienungsanleitung

Highway Safety Group

Highway Safety Group EA401 Bedienungsanleitung

Siren

Siren LED GSM Bedienungsanleitung

Detection Systems

Detection Systems 7090i Montageanleitung

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung

Siemens

Siemens FDM273 Bedienungsanleitung