ADT Safewatch Quick Connect Plus Bedienungsanleitung

For a detailed review of the entire system, please view the Safewatch Quick Connect Plus system manual.

Arm and Disarm

Arm:

To arm all sensors in STAY mode when you are not leaving the premises, enter your [security code] +

[STAY] or press and hold [STAY].

To arm all sensors in AWAY mode when you are leaving the premises, enter your [security code] +

[AWAY] or press and hold [AWAY].

Disarm:

To disarm, enter your [security code] + [OFF].

Battery

The Safewatch Quick Connect operates on the 7.2V Battery Pack.

Quick Guide: Safewatch Quick Connect Plus

Loss of AC power and use of backup battery power is indicated by No AC.

A low battery condition is indicated by Low Bat.

For instructions on replacing your battery, please visit our Battery Replacement Page.

Bypassing Protected Areas

Bypassing a zone allows you to arm your system with certain protected areas intentionally unarmed or to

access a protected area when the system is armed.

To bypass a zone, enter your [security code] + [BYPASS] + [2-digit zone number].

To unbypass a zone, enter your [security code] + [OFF].

Change Time and Date

Enter your [Master code] + [FUNCTION] + [6] + [3].

When ‘SET TIME’ appears, enter the 2-digit hour, i.e., 18 for 6:00.

Press [ADD] and choose [1] for PM or [0] for AM, then press [ADD] again.

Enter the 2-digit minute, i.e., 14 for 6:14, then press [ADD].

Enter the 2-digit month, i.e., 03 for March, then press [ADD].

Enter the 2-digit day, i.e., 23 for March, 23, then press [ADD].

Enter the 2-digit year, i.e., 15 for March 23, 2015, then press ‘ADD] to accept the entry and exit Clock-

Setting mode. The keypad will beep 4 times in confirmation.

Chimes and Beeps

When your system is in chime mode, a chime will sound three beeps whenever a protected door/window is

opened.

To turn the door chime function on and off, press [FUNCTION] + [CHIME].

Reset

To clear the display after an alarm event, enter your [security code] + [OFF] to clear the alarm event history.

Security Codes

You can program up to 6 additional user codes.

To add a user, enter the [Master code] + [CODE] + [new user number] + [new user code].

To erase a user, enter the [Master code] + [CODE] + [user number] and wait approximately three

seconds for the keypad to beep and verify.

Some user numbers have already been programmed:

Pre-programmed User

Function

User Number

Installer

All functions

[1]

Master

All functions

[2]

Babysitter

Only arm the system.

[7]

Duress

Secretly notifies the

monitoring center of duress.

[8]

For a complete list of User Code Attributes, please see the Safewatch Quick Connect Plus system manual.

Trouble Conditions

When a trouble condition is detected, the word ‘FAULT’ will be displayed on the panel.

The existing Trouble Condition keyword will appear on the display.

To silence the Trouble Condition beeps, enter your [security code] + [OFF].

For a list of possible Trouble Conditions, please see the Safewatch Quick Connect Plus system manual.

Volume

System announcements and status beep volume can be adjusted.

To adjust the volume level, press [FUNCTION] + [VOLUME] + [3]/[6].

[3] increases the volume by one level and [6] decreases the volume by one level.

To mute the volume level, press [FUNCTION] + [VOLUME] + [OFF].

Inhaltsverzeichnis

Andere ADT Sicherheitssystem Handbücher

ADT

ADT Keychain Remote Bedienungsanleitung

ADT

ADT Fall Detection Pendant Bedienungsanleitung

ADT

ADT Safewatch Pro 3000 Benutzerhandbuch

ADT

ADT BHS-3000C Bedienungsanleitung

ADT

ADT Safewatch Plus Enterpreneur Security Systems Bedienungsanleitung

ADT

ADT PowerSeries SCW9045-433 Bedienungsanleitung

ADT

ADT Safewatch Pro 3000 Betriebsanleitung

ADT

ADT PremisePro none Bedienungsanleitung

ADT

ADT K5309V2 Bedienungsanleitung

ADT

ADT ADT7AIO Series Montageanleitung

ADT

ADT Commercial Fire & Burglary Alarm System FOCUS 200... Bedienungsanleitung

ADT

ADT Safewatch Bedienungsanleitung

ADT

ADT ACCORD XPC Bedienungsanleitung

ADT

ADT On-The-Go Emergency Response System Bedienungsanleitung

ADT

ADT IGB-02 Bedienungsanleitung

ADT

ADT Safe-N-Go Bedienungsanleitung

ADT

ADT BHS-4000A Bedienungsanleitung

ADT

ADT QuickConnect Gebrauchs- und Pflegehandbuch

ADT

ADT FOCUS CADET Bedienungsanleitung

ADT

ADT SA10ADTEG Betriebsanleitung

ADT

ADT Galaxy 8 Bedienungsanleitung

ADT

ADT Safewatch QuickConnect Plus Betriebsanleitung

ADT

ADT Safewatch Pro 3000EN Montageanleitung

ADT

ADT Commercial Fire & Burglary Alarm System FOCUS 200... Montageanleitung

Beliebte Sicherheitssystem Handbücher anderer Marken

Inner Range

Inner Range Concept 2000 Bedienungsanleitung

Climax

Climax Mobile Lite R32 Montageanleitung

CADDX

CADDX NX-6 Bedienungsanleitung

FBII

FBII XL-31 Series Bedienungsanleitung

Johnson Controls

Johnson Controls PENN Connected PC10 Bedienungsanleitung

Aeotec

Aeotec Siren Gen5 Bedienungsanleitung

Blaupunkt

Blaupunkt SA 2700 Bedienungsanleitung

IDEAL

IDEAL Accenta Betriebsanleitung

AJAX

AJAX DoubleButton Bedienungsanleitung

Swann

Swann SW-P-MC2 Bedienungsanleitung

Ecolink

Ecolink Siren+Chime Bedienungsanleitung

Digital Monitoring Products

Digital Monitoring Products XR150 Bedienungsanleitung

EDM

EDM Solution 6+6 Wireless-AE Bedienungsanleitung

Highway Safety Group

Highway Safety Group EA401 Bedienungsanleitung

Siren

Siren LED GSM Bedienungsanleitung

Detection Systems

Detection Systems 7090i Montageanleitung

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung

Siemens

Siemens FDM273 Bedienungsanleitung