ADT DSC Impassa Bedienungsanleitung

For a detailed review of the entire system, please view the DSC Impassa system manual.

Arm and Disarm

Arm:

To arm all sensors in AWAY mode when you are leaving the premises, press and hold [AWAY] or enter

your [security code] + [*] + [0] to Quick Arm.

To arm all sensors in STAY mode when you are not leaving the premises, press and hold [STAY] +

[security code].

Disarm:

To disarm, enter your [security code].

Battery

The DSC Impassa operates on the 3600 mAh battery.

Loss of AC power and use of backup battery power is indicated by Loss of AC Power.

Quick Guide: DSC Impassa

A low battery condition is indicated by Service Required.

Bypassing Protected Areas

Bypassing a zone allows you to arm your system with certain protected areas intentionally left unarmed or to

access a protected area when the system is armed.

To bypass a zone, press [*] to enter the function menu.

Press [1] or [*], then your [security code].

Enter the two digit number of the zone to be bypassed or use the [<>] keys to find the zone.

Press [*] to select a zone.

To exit bypassing mode and return to Ready state, press [#].

To unbypass a zone, simply arm and disarm your system.

Change Time and Date

Press [*] + [6] + [Master security code] to enter the programming menu.

Use [<>] to find [Time and Date Programming], then press [*].

Enter the time in 24-hour format, i.e., 16:30 for 4:30pm.

Enter the date in MM:DD:YY format, i.e., 03/02/15 for March 2, 2015.

Press [#] to exit.

Chimes and Beeps

When your system is in chime mode, a chime will sound three tones whenever a protected door/window is

opened.

To turn the door chime function on or off, press and hold the [Chime] key for two seconds or press [*]

+ [4].

Reset

To clear the display after an alarm event, first press [*] + [3] to view the event.

To clear the event history, arm, and then disarm your system with your [security code].

To clear the display after a fire alarm, hold the [Reset] button for several seconds to clear the fire

alarm history.

Trouble Condition alarms will clear from the display when the condition no longer exists.

Security Codes

You can program up to 16 additional user codes and attributes. Additional users will be restricted to arming

and disarming functions, while the Master user code can perform all functions.

To program a new user, press [*] + [5] + [Master security code].

Enter the two digit number to be programmed, i.e., 06 for Access Code 6 or use the [<>] to find the

desired user code and press [*] to select.

Enter the new user’s new access code.

Continue adding additional user codes or press [#] to exit.

To erase an access code, select the code using [*] as the first digit. The system will automatically erase

the access code.

Some user codes have been pre-programmed:

User Level

Explanation

User Code

Master

Can perform all functions and assign codes.

Can only be changed by

an installer.

Supervisor

Similar to Master level, but can be changed without

requiring an installer.

[1]

Duress

Code secretly sends a duress report. Any user code

can be made a Duress code.

[2]

Zone Bypassing

Can manually bypass zones and arm/disarm the

system.

[3]

Phone Access

User can specify which user codes can be used for

remote access via SMS.

[4]

For future use

Reserved for future use.

[5], [6]

Onetime User

Code

Can disarm the system once per day. Reset daily at

midnight.

[8]

Users can also be assigned attributes, like the Bell Squawk Attribute, for example, which generates a sound

when that user arms and disarms the system.

For a complete list of User Code Attributes please see the DSC Impassa system manual.

To assign user attributes, enter [*] + [5] + [Master/Supervisor code] + [9] + [user code]/[scroll to user

code] + [*] + [attribute code] + [*].

Trouble Conditions

When a trouble condition is detected, the Trouble or System indicator will turn on and the keypad will beep

every 10 seconds.

To view the Trouble Condition, press [*] + [2].

To silence the Trouble Condition beeps, press [#].

For a list of possible Trouble Conditions, please see the DSC Impassa system manual.

Volume

The buzzer provides audible confirmation that a command to the panel has been executed.

The buzzer has 21 different levels of volume.

To adjust the buzzer level, press [*] + [6] + [Master code].

Use the [<>] buttons to scroll to [Buzzer Control], then press [*] to select.

Use the [<>] to scroll to the desired level, then press [#] to exit.

To disable the buzzer, choose level [00].

Inhaltsverzeichnis

Andere ADT Sicherheitssystem Handbücher

ADT

ADT Safewatch Bedienungsanleitung

ADT

ADT ADT2X16AIO Montageanleitung

ADT

ADT ACCORD XPC Bedienungsanleitung

ADT

ADT ADTHYBWL Series Bedienungsanleitung

ADT

ADT IGB-02 Bedienungsanleitung

ADT

ADT Fall Detection Pendant Bedienungsanleitung

ADT

ADT SA10ADTEG Bedienungsanleitung

ADT

ADT Safewatch Pro 2000 Bedienungsanleitung

ADT

ADT Safewatch QuickConnect Plus Betriebsanleitung

ADT

ADT Safe-N-Go Bedienungsanleitung

ADT

ADT Safewatch Pro 3000 Betriebsanleitung

ADT

ADT BHS-3000C Bedienungsanleitung

ADT

ADT Keychain Remote Bedienungsanleitung

ADT

ADT FOCUS CADET Bedienungsanleitung

ADT

ADT DSC Impassa Bedienungsanleitung

ADT

ADT Safewatch QuickConnect Plus Bedienungsanleitung

ADT

ADT TSSC Montageanleitung

ADT

ADT ADT7AIO Series Gebrauchsanweisung

ADT

ADT ADTHYBWL Series Bedienungsanleitung

ADT

ADT Ademco Vista 20P/PSIA Bedienungsanleitung

ADT

ADT Smart Home PM360 Bedienungsanleitung

ADT

ADT Commercial Fire & Burglary Alarm System FOCUS 200... Bedienungsanleitung

ADT

ADT Entrepreneur 3000EN Betriebsanleitung

ADT

ADT Galaxy 8 Bedienungsanleitung

Beliebte Sicherheitssystem Handbücher anderer Marken

Inner Range

Inner Range Concept 2000 Bedienungsanleitung

Climax

Climax Mobile Lite R32 Montageanleitung

CADDX

CADDX NX-6 Bedienungsanleitung

FBII

FBII XL-31 Series Bedienungsanleitung

Johnson Controls

Johnson Controls PENN Connected PC10 Bedienungsanleitung

Aeotec

Aeotec Siren Gen5 Bedienungsanleitung

Blaupunkt

Blaupunkt SA 2700 Bedienungsanleitung

IDEAL

IDEAL Accenta Betriebsanleitung

AJAX

AJAX DoubleButton Bedienungsanleitung

Swann

Swann SW-P-MC2 Bedienungsanleitung

Ecolink

Ecolink Siren+Chime Bedienungsanleitung

Digital Monitoring Products

Digital Monitoring Products XR150 Bedienungsanleitung

EDM

EDM Solution 6+6 Wireless-AE Bedienungsanleitung

Highway Safety Group

Highway Safety Group EA401 Bedienungsanleitung

Siren

Siren LED GSM Bedienungsanleitung

Detection Systems

Detection Systems 7090i Montageanleitung

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung

Siemens

Siemens FDM273 Bedienungsanleitung