ADT Fall Detection Pendant Bedienungsanleitung
1
ADT MEDICAL ALERT
Fall Detection
Pendant
User guide
2
Thank you for choosing the
ADT Fall Detection pendant
We welcome you to the ADT family.
If you have any questions please call
our support team.They are available
24/7/365.
The Fall Detection pendant*enables
you to send an alarm to the
emergency response center when you
need it by pressing the blue emergency
help button. It also provides extra
protection by automatically sending
an alarm if you fall and are unable to
push your button.
For assistance call
(800)568-1216 and select option 1
2
*Fall Detection pendant does not detect 100% of falls.
3
Complete user guide
This user guide includes information covering:
The Fall Detection pendant
Note: The Fall Detection pendant is compatible with both the
Medical Alert Plus and On-The-Go emergency response systems.
4
Fall Detection pendant features
Technical support
use only
Multicolor
indicator
Emergency help
(blue) button
5
How to wear your Fall Detection pendant
Putting on the Fall Detection pendant
ƼPlace the Fall Detection pendant around your neck and
adjust the lanyard so that it rests at chest level.Make
sure the pendant is facing away from your body so that
it is easier for you to press.
ƼWear the Fall Detection pendant outside your shirt, as
wearing it inside your shirt can reduce the percentage
of falls being detected.
ƼPlease handle your Fall Detection pendant with care
when putting it on or taking it o, as the device may
interpret this movement as a fall and activate.
6
If an actual fall has occurred,the Fall Detection
pendant takes 20 to 30 seconds to interpret the
movement and determines that a fall has occurred:
ƼThe Fall Detection pendant sounds a series of beeps and
the light ashes red for 20 seconds.
ƼThe medical alert system states,“fall detected, press
and hold button to cancel.”
ƼIf you do not cancel the fall detection alarm during the
rst 20 seconds after a fall was detected, the device
states, “fall detected, contacting emergency response
center” and then “please stand by for operator.”
ƼCommunicate with the operator that you are in need of
help and emergency response will be sent.
How the Fall Detection pendant works
Medical Alert Plus base
station
Fall Detection
pendant On-The-Go mobile device
7
How to test your Fall Detection pendant
Please follow these simple steps.
Please have your complete medical alert
system near you at the time of testing. It
is important that you test your system at
least once a month.
OPTION 1
1. Firmly press the blue button on the Fall
Detection pendant one time.
ƼIf you have a mobile device, it will sound three (3) double
beeps and the red ring around the gray emergency button
lights up for several seconds,and then fades out.
ƼAn emergency operator will speak with you through the base
station or mobile device.
2. Tell the operator that this is not an emergency and
that you are testing the system.
ƼIf you do not respond or speak to the operator and explain that
you are testing your unit, emergency help will be dispatched.
Test your Fall Detection pendant
by pressing the help button
ƼThe medical alert system states, “call in progress.”
ƼAfter the fall detection alarm is received,the base
station states, “please stand by for operator.”
Note: The mobile device nor the base station will not
transmit an emergency call if one was activated
within the last two minutes.
8
How to test your Fall Detection pendant
Please follow these simple steps.
Please have your complete medical alert
system near you at the time of testing. It
is important that you test your system at
least once a month.
OPTION 2
1. Drop the Fall Detection pendant from a
height of approximately18 inches.The
pendant takes 20 to 30 seconds to interpret
the movement and determine if an actual
fall has occurred.
ƼIf you have a mobile device, it will sound three (3) double beeps
and the red ring around the gray emergency button lights up for
several seconds, and then fades out.
2. Do not pick up the Fall Detection pendant before the
test is completed,as it may interpret this as normal
movement and cancel the test call.
Drop testing your Fall
Detection pendant
ƼThe Fall Detection pendant sounds a series of beeps and
the light ashes red for 20 seconds.
ƼThe base station states,“fall detected, press and hold
button to cancel."
ƼAfter 20 seconds, from when a fall was detected,the device states,
“fall detected, contacting emergency response center” and then
“please stand by for operator.”
ƼAn emergency operator will speak with you through the base
station or mobile device.
3. Tell the operator that this is not an emergency and
that you are testing the system.
ƼIf you do not respond or speak to the operator and explain that
you are testing your unit, emergency help will be dispatched.
9
ƼPress and hold the blue emergency help
button on the Fall Detection pendant for ve
seconds until it ashes green once and you
hear a series of beeps.
ƼFor Medical Alert Plus users: You can also
cancel the fall detection alarm by pressing
the blue RESET button on the base station.
ƼFor On-the-Go users: You cannot cancel the
fall detection alarm with the mobile device.
You must press the blue button on the Fall
Detection pendant to cancel the alarm.
ƼIf you cancel the fall detection alarm, your
base station states,“alarm cancelled.”
To cancel a false alarm
ƼWait for the emergency operator to speak
to you through the Medical Alert device.
ƼTell the operator that this is not an
emergency and that you do not need help.
If the help button was pressed on the Fall
Detection pendant, you cannot manually
cancel the alarm...
To cancel the Fall Detection alarm during the
rst 20 seconds after a fall was detected:
For no alarm to be sent to the emergency response center.
10
Fall Detection pendant light indicator
Color Pattern Meaning
None O No alarm detected
Red Flashes once Button has been pressed
Red Flashes repeatedly Fall is detected
Green Flashes once Alarm has been cancelled
Amber One ash every two minutes Pendant battery is low
The multicolor indicator at the top of the Fall Detection
pendant ashes in dierent colors to advise you of various
conditions.The following table describes the colors that the
indicator may ash and what it means.
Multicolor indicator
Inhaltsverzeichnis
Andere ADT Sicherheitssystem Handbücher
ADT
ADT ADT7AIO Series Gebrauchsanweisung
ADT
ADT NT9005 V1.0 NA Bedienungsanleitung
ADT
ADT K5309V2 Bedienungsanleitung
ADT
ADT PowerSeries SCW9045-433 Bedienungsanleitung
ADT
ADT Security System 4112 Bedienungsanleitung
ADT
ADT Safewatch Pro 3000 Benutzerhandbuch
ADT
ADT SA10ADTEG Betriebsanleitung
ADT
ADT DSC 9047 Bedienungsanleitung
ADT
ADT IGB-02 Bedienungsanleitung
ADT
ADT Ademco Vista 20P/PSIA Bedienungsanleitung
ADT
ADT Safe-N-Go Bedienungsanleitung
ADT
ADT On-The-Go Emergency Response System Bedienungsanleitung
ADT
ADT Security System D7412 Bedienungsanleitung
ADT
ADT SA10ADTEG Bedienungsanleitung
ADT
ADT On-The-Go Emergency Response System Bedienungsanleitung
ADT
ADT On-The-Go Bedienungsanleitung
ADT
ADT ADTHYBWL Series Bedienungsanleitung
ADT
ADT SafeWatch 3000 Bedienungsanleitung
ADT
ADT Commercial Fire & Burglary Alarm System FOCUS 200... Bedienungsanleitung
ADT
ADT Galaxy 8 Bedienungsanleitung
Beliebte Sicherheitssystem Handbücher anderer Marken
EDM
EDM Solution 6+6 Wireless-AE Bedienungsanleitung
Highway Safety Group
Highway Safety Group EA401 Bedienungsanleitung
Siren
Siren LED GSM Bedienungsanleitung
Detection Systems
Detection Systems 7090i Montageanleitung
Se-Kure Controls
Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung
Siemens
Siemens FDM273 Bedienungsanleitung