ADT Health Fall Detection Pendant Bedienungsanleitung

ADT

Health

Fall Detection Pendant

User Guide

Table of Contents

Introduction .....................................................................................................................................................3

Putting on the Fall Detection Pendant......................................................................................................7

Testing Your Fall Detection Pendant.............................................................................................................. 8

Testing Fall Detection........................................................................................................................................ 9

Using the Fall Detection Pendant............................................................................................................11

With the Medical Alert Plus System.............................................................................................................11

With the On-the-Go Emergency Response System ..................................................................................14

To Manually Call for Help................................................................................................................................16

Fall Detection Pendant Light Indicator ........................................................................................................17

Helpful Tips to Minimize Activation While Sleeping...........................................................................18

Important Safety Information .................................................................................................................. 19

Frequently Asked Questions .................................................................................................................... 21

FCC Statement ............................................................................................................................................ 24

Technical Specifications............................................................................................................................ 26

Contact ADT ................................................................................................................................................. 27

Legal Information ........................................................................................................................................ 28

2 ADT® Health Customer Support 800.568.1216

Introduction

Thank you for choosing the ADT®Fall Detection Pendant. We welcome you to the

ADT family. If you have any questions please call our support team at

800.568.1216 . They are available 24/7/365.

The Fall Detection Pendant enables you to send an alarm to the emergency response

center when you need it by pressing the blue Emergency Help Button. It also

provides extra protection by automatically sending an alarm if you fall and are unable

to push your button.

For assistance call:

800.568.1216

Fall Detection Pendant User Guide 3

Using the Fall Detection Pendant with the ADT Health Systems

The Fall Detection Pendant is compatible with both the Medical Alert Plus and

On-the-Go Emergency Response Systems. The Medical Alert Plus System uses a

fixed Base Station that resides within your home. The On-the-Go Emergency

Response System features a portable Mobile Device that you can use inside your

home and take with you when you leave home. You can speak with an emergency

response operator using either of these two devices. The Fall Detection Pendant

itself is not capable of two-way communication.

Base Station used with

Medical Alert Plus System

Mobile Device used with

On-the-Go Emergency Response System

4 ADT® Health Customer Support 800.568.1216

This user guide describes using the Fall Detection Pendant with both of these

systems. Please remember that when we mention the Base Station, we are referring

to the Medical Alert Plus System. When we talk about the Mobile Device, we are

referring to the On-the-Go Emergency Response System.

The Fall Detection Pendant does not detect 100% of falls. If able, you should always

push the blue Emergency Help Button when you need assistance. You will find

instructions on how to set up your system in the user guide for your Medical Alert

Plus System or On-the-Go Emergency Response System.

Fall Detection Pendant User Guide 5

Fall Detection Pendant Features

Multicolor

Indicator

Emergency Help

(Blue) Button

Technical Support

Use Only

6 ADT® Health Customer Support 800.568.1216

Putting on the Fall Detection Pendant

Place the Fall Detection Pendant around your neck and adjust the lanyard so that

it rests at chest level with the Pendant facing away from your body so that it is

easier for you to press.

Wear the Fall Detection Pendant outside your shirt, as wearing it inside your shirt

can reduce the percentage of falls being detected.

NOTE:

Please handle your Fall Detection Pendant with care when putting it on or

taking it off, as the device may interpret this movement as a fall and activate.

If the Fall Detection Pendant does sense a fall, it sounds a series of beeps and

the red light begins flashing.

You can cancel the Fall Detection alarm by pressing and holding the blue

Emergency Help Button on the Fall Detection Pendant for approximately 5

seconds until the light flashes green once and you hear a series of beeps.

If you are unable to cancel, please tell the operator that it was a false alarm.

If you do not respond or speak to the operator, emergency help will be

dispatched.

Fall Detection Pendant User Guide 7

Testing Your Fall Detection Pendant

Please have your complete system near you at the time of testing.

NOTE: It is important that you test your system at least once a month.

Firmly press the blue button on the Fall Detection Pendant one time.

An alarm is sent to the Base Station or Mobile Device.

The Base Station states, “CALL IN PROGRESS.” After the Fall Detection alarm

is received, the Base Station states, “PLEASE STAND BY FOR OPERATOR.”

The Mobile Device sounds three (3) double beeps and the red ring around the

gray Emergency button lights up for several seconds, and then fades out.

An emergency operator will speak with you through the Base Station or

Mobile Device.

Tell the operator that this is not an emergency and that you are testing the system.

If you do not respond or speak to the operator and explain that you are testing

your unit, emergency help will be dispatched.

NOTE: Neither the Base Station nor the Mobile Device will transmit an emergency

call if you have already sent one within the previous two minutes.

8 ADT® Health Customer Support 800.568.1216

Testing Fall Detection

Please have your complete system near you at the time of testing.

Drop the Fall Detection Pendant from a height of approximately 18 inches. The

Pendant takes 20 to 30 seconds to interpret the movement and determine if an

actual fall has occurred. If it determines that a fall has occurred:

The Fall Detection Pendant sends a signal to the Base Station or Mobile

Device.

The Fall Detection Pendant sounds a series of beeps and the light flashes red

for 20 seconds.

The Base Station states, “FALL DETECTED, PRESS AND HOLD BUTTON TO

CANCEL.”

The Mobile Device sounds three (3) double beeps and the red ring around the

gray Emergency button lights up for several seconds, and then fades out.

Do not pick up the Fall Detection Pendant before the test is completed, as it may

interpret this as normal movement and cancel the test call.

Fall Detection Pendant User Guide 9

To cancel the Fall Detection test call:

Press and hold the blue Emergency Help Button on the Fall Detection Pendant

for five seconds until it flashes green once and you hear a series of beeps. The

alarm is not sent to the emergency response center.

You can also cancel the Fall Detection alarm by pressing the blue RESET button

on the Base Station. If you cancel the Fall Detection alarm, your Base Station

states, “ALARM CANCELLED.”

You cannot cancel the Fall Detection alarm with the Mobile Device. You must

press the blue button on the Fall Detection Pendant to cancel the alarm.

NOTE:

If you do not cancel the alarm during the first 20 seconds after a fall was

detected, a call will be made to the Emergency Response Center. Please tell the

operator that you are testing your system. If you do not respond or speak to the

operator and explain that this is a test, emergency help will be dispatched.

10 ADT® Health Customer Support 800.568.1216

Andere Handbücher für Health Fall Detection Pendant

Inhaltsverzeichnis

Andere ADT Sicherheitssystem Handbücher

ADT

ADT Safewatch Bedienungsanleitung

ADT

ADT Garda Response PM30 Bedienungsanleitung

ADT

ADT SA10ADTEG Bedienungsanleitung

ADT

ADT SAFEWATCH PRO Bedienungsanleitung

ADT

ADT TSSC Montageanleitung

ADT

ADT Security System 4112 Bedienungsanleitung

ADT

ADT Commercial Fire & Burglary Alarm System FOCUS 200... Montageanleitung

ADT

ADT Safewatch QuickConnect Plus Betriebsanleitung

ADT

ADT ADT7AIO Series Montageanleitung

ADT

ADT Safewatch Plus Enterpreneur Security Systems Bedienungsanleitung

ADT

ADT NT9005 V1.0 NA Bedienungsanleitung

ADT

ADT Safewatch Pro 3000 Benutzerhandbuch

ADT

ADT Galaxy 8 Bedienungsanleitung

ADT

ADT 3G Cellular Medical Alert System Bedienungsanleitung

ADT

ADT FOCUS CADET Bedienungsanleitung

ADT

ADT BHS-3000C Bedienungsanleitung

ADT

ADT BHS-4000A Bedienungsanleitung

ADT

ADT Safe-N-Go Bedienungsanleitung

ADT

ADT DSC Impassa Bedienungsanleitung

ADT

ADT SAFEWATCH EZ Bedienungsanleitung

ADT

ADT Smart Home PM360-R Bedienungsanleitung

ADT

ADT Commercial Fire & Burglary Alarm System FOCUS 200... Bedienungsanleitung

ADT

ADT FOCUS CADET Bedienungsanleitung

ADT

ADT QuickConnect Gebrauchs- und Pflegehandbuch

Beliebte Sicherheitssystem Handbücher anderer Marken

Inner Range

Inner Range Concept 2000 Bedienungsanleitung

Climax

Climax Mobile Lite R32 Montageanleitung

CADDX

CADDX NX-6 Bedienungsanleitung

FBII

FBII XL-31 Series Bedienungsanleitung

Johnson Controls

Johnson Controls PENN Connected PC10 Bedienungsanleitung

Aeotec

Aeotec Siren Gen5 Bedienungsanleitung

Blaupunkt

Blaupunkt SA 2700 Bedienungsanleitung

IDEAL

IDEAL Accenta Betriebsanleitung

AJAX

AJAX DoubleButton Bedienungsanleitung

Swann

Swann SW-P-MC2 Bedienungsanleitung

Ecolink

Ecolink Siren+Chime Bedienungsanleitung

Digital Monitoring Products

Digital Monitoring Products XR150 Bedienungsanleitung

EDM

EDM Solution 6+6 Wireless-AE Bedienungsanleitung

Highway Safety Group

Highway Safety Group EA401 Bedienungsanleitung

Siren

Siren LED GSM Bedienungsanleitung

Detection Systems

Detection Systems 7090i Montageanleitung

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung

Siemens

Siemens FDM273 Bedienungsanleitung