■Important Safety Instructions
1. The installation must be in compliance with the National Electrical Code, and your local electrical and
plumbing codes.
2. This appliance must be GROUNDED /EARTHED. (If the model is equipped with plug, it is a electric leakage
protection plug ).
3. Install or locate this water heater only in accordance with the provided installation instructions.
4. Use this water heater only for its intended use as described in this manual.
5. For models that come without a plug, please contact a qualified electrician to have unit properly installed.
6. This appliance is not intended for use by persons (including children) with reduced physical sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not
play with the appliance.
5. This appliance MUST be permanently connected to the fixed circuit breaker and it must be installed vertically
(excluding the models which are equipped with plug). DO NOT install this appliance near to flammable materials or a
strong magnetic field.
6. This appliance is forbidden to be switch on if you think it may be frozen, as this could result in serious damage to the
unit. Wait until you are sure that it has completely thawed out before you switch it on.
7. Please feel the outlet hot water temperature with hand to make sure it is suitable for use before taking a shower to
avoid getting scalded.
8. Before connecting pipes to the water heater hoses, it is extremely important to FLUSH the pipes to wash away all
plumbing paste or residue in the pipes.
9. If there is damage to the wire, you must contact a qualified electrician to replace it with dedicated wire from
authorized dealers or electrical supply store.
10. Check valve is required to be installed at the water inlet.
11. The water relief valve should be used periodically in order to remove calcium carbonate deposits.
12. The drain-pipe which is connected to the water relief valve should be installed continuous downward position and in
a frost free environment.
13. The spray head must be descaled regularly.
WARNING: Do not switch on if there is a possibility that the water in the heater is frozen.
■Product Features
This Mini tankless electric water heater differs from a conventional storage type mini water heaters. It doesn’t store
hot water. Instead, water is heated instantaneously as it flows through the unit. The powerful heating elements are
activated by a flow switch as water is drawn from a hot water faucet connected to the appliance. The advantage
mini tankless water heater has greater energy efficiency than storage type water heaters as it only heats the water
when you demand it. The units are incorporated with multi-safety devices and will continuously supply hot water as
long as the faucet is open.
The Advantage mini tankless water heater has the following features.
1. Tankless, instantaneous heating for on demand hot water, No pre-heating. No stand-by heating loss.
energy-saving.
2. High strength ABS splash proof casing, stainless steel heating element.
3. Compact appearance and unlimited supply of hot water.
4. Easy installation, heater can be installed above or under sink.
5. Easy operation, the heater provides hot water with constant temperature.
6. Micro-computer control, using patented heating technology. Water is completely separated from electricity by
multi-layers of composite nano insulation material.
7. Over temperature protection: when the outlet water temp. reaches or over 60°C, the appliance will shut down,
it will re-start automatically while temp. drops to operating temperature range.
8. There is a built-in pressure relief valve at the water outlet to prevent explosion.
