Advantech PCA-6179 Bedienungsanleitung

PCA-6179

Full-size socket 370 Intel®

Pentium® III processor-

based PCI/ISA-bus CPU

card

This document is copyrighted, 2000, by Advantech Co., Ltd. All

rights are reserved. Advantech Co., Ltd. reserves the right to make

improvements to the products described in this manual at any time

without notice.

No part of this manual may be reproduced, copied, translated or

transmitted in any form or by any means without the prior written

permission of Advantech Co., Ltd. Information provided in this

manual is intended to be accurate and reliable. However, Advantech

Co., Ltd. assumes no responsibility for its use, nor for any in-

fringements upon the rights of third parties which may result from its

use.

Acknowledgements

• AWARD is a trademark of AWARD Software, Inc.

• IBM and PC are trademarks of International Business Machines

Corporation.

• Intel®and Pentium®III are trademarks of Intel Corporation.

• MS-DOS is a trademark of Microsoft Corporation.

• SMC is a trademark of Standard Microsystems Corporation.

• WinBond is a trademark of Winbond Corporation.

• SYMBIOS is a registered trademark of Symbios, Inc.

• ATI is a registered trademark of ATI Technologies, Inc.

• VIA is a registered trademark of VIA Technologies Inc.

All other product names or trademarks are the properties of their

respective owners.

Part No. 2006617910

2nd Edition Printed in Taiwan Nov. 2000

A Message to the Customer

Advantech customer services

Each and every Advantech product is built to the most exacting

specifications to ensure reliable performance in the harsh and

demanding conditions typical of industrial environments. Whether

your new Advantech equipment is destined for the laboratory or the

factory floor, you can be assured that your product will provide the

reliability and ease of operation for which the name Advantech has

come to be known.

Your satisfaction is our primary concern. Here is a guide to

Advantech’s customer services. To ensure you get the full benefit of

our services, please follow the instructions below carefully.

Technical support

We want you to get the maximum performance from your products.

So if you run into technical difficulties, we are here to help. For the

most frequently asked questions, you can easily find answers in your

product documentation. These answers are normally a lot more

detailed than the ones we can give over the phone.

So please consult this manual first. If you still cannot find the answer,

gather all the information or questions that apply to your problem, and

with the product close at hand, call your dealer. Our dealers are well

trained and ready to give you the support you need to get the most

from your Advantech products. In fact, most problems reported are

minor and are able to be easily solved over the phone.

In addition, free technical support is available from Advantech

engineers every business day. We are always ready to give advice on

application requirements or specific information on the installation

and operation of any of our products.

elbatnosirapmocseireS9716-ACP

ledoML9716-ACPV9716-ACPEV9716-ACPSV9716-ACPF9716-ACP

:UPC letnI

muitneP

073tekcoSIII ✓✓✓ ✓✓

:tespihcmetsyS A331orPollopAAIV ✓✓✓ ✓✓

:SOIB SOIBhsalFP&PdrawA ✓✓✓ ✓✓

:ehcaC2L )UPCno(BK652 ✓✓✓ ✓✓

:MARmetsyS.xaM

)stekcosnip-861x3(BG5.1 ✓✓✓ ✓✓

:evirDhgiHASI Am46otpu ✓✓✓ ✓✓

troPBSU 22 222

srotcennocEDIE2 ✓✓✓ ✓✓

:ksidetatsdiloS COD

0002 ✓✓✓ ✓✓

stroplellarap1,laires2 ✓✓✓ ✓✓

:AGV AGV/PGA

)LX4orPegaRITA( ✕✓ ✓ ✓ ✓

:NAL tenrehtET-esaB001/01

)C9318ketlaeR:tespihc( ✕✕✓ ✕✓

)598C35MYS(ISCS2artlU ✕✕✕ ✓✓

Product warranty

Advantech warrants to you, the original purchaser, that each of its

products will be free from defects in materials and workmanship for

two years from the date of purchase.

This warranty does not apply to any products which have been

repaired or altered by persons other than repair personnel authorized

by Advantech, or which have been subject to misuse, abuse, accident

or improper installation. Advantech assumes no liability under the

terms of this warranty as a consequence of such events.

If an Advantech product is defective, it will be repaired or replaced at

no charge during the warranty period. For out-of-warranty repairs,

you will be billed according to the cost of replacement materials,

service time and freight. Please consult your dealer for more details.

If you think you have a defective product, follow these steps:

1. Collect all the information about the problem encountered. (For

example, type of PC, CPU speed, Advantech products used, other

hardware and software used, etc.) Note anything abnormal and list

any on-screen messages you get when the problem occurs.

2. Call your dealer and describe the problem. Please have your

manual, product, and any helpful information readily available.

3. If your product is diagnosed as defective, obtain an RMA (return

material authorization) number from your dealer. This allows us to

process your return more quickly.

4. Carefully pack the defective product, a fully-completed Repair and

Replacement Order Card and a photocopy proof of purchase date

(such as your sales receipt) in a shippable container. A product

returned without proof of the purchase date is not eligible for

warranty service.

5. Write the RMA number visibly on the outside of the package and

ship it prepaid to your dealer.

Initial Inspection

Before you begin installing your card, please make sure that the

following materials have been shipped:

• 1 PCA-6179 socket 370 Pentium III®processor-based single board

computer

• 1PentiumIII®processor, (optional)1coolingfan,P/N:1759205400

• 1 PCA-6179 startup Manual

• 1CDdriverutilityandmanual(inPDFformat)

• 4 SCSI driver disks (optional)

• 1FDDcable,P/N:1701340703

• 2UDMA66HDDcables,P/N:1701400452

• 1printer(parallelport)cable&COMportcable kit, P/N: 1700060305

• 1ATX-to-PS/2powercable,P/N: 1700000450

• 1ivorycableforPS/2 keyboard and PS/2 mouse, P/N: 1700060202

• 1SCSIcable (optional),P/N1701060000

• 1USBcable (optional),P/N1700100170

If any of these items are missing or damaged, contact your distributor

or sales representative immediately.

We have carefully inspected the PCA-6179 mechanically and

electrically before shipment. It should be free of marks and scratches

and in perfect working order upon receipt.

As you unpack the PCA-6179, check it for signs of shipping damage.

(For example, damaged box, scratches, dents, etc.) If it is damaged or

it fails to meet the specifications, notify our service department or

your local sales representative immediately. Also notify the carrier.

Retain the shipping carton and packing material for inspection by the

carrier. After inspection, we will make arrangements to repair or

replace the unit.

Contents

Chapter 1 Hardware Configuration.............................. 1

1.1 Introduction........................................................................2

1.2 Features...............................................................................3

1.3 Specifications ......................................................................5

1.3.1 System.........................................................................5

1.3.2 Memory.......................................................................5

1.3.3 Input/Output ................................................................6

1.3.4 VGA interface .............................................................6

1.3.5 SCSI interface .............................................................6

1.3.6 Ethernet LAN ..............................................................6

1.3.7 Solid state disk ............................................................6

1.3.8 Industrial features .......................................................7

1.3.9 Mechanical and environmental specifications............7

1.4 Board Layout: Main Features ..........................................8

1.5 Jumpers and Connectors...................................................9

1.6 Board Layout: Jumper and Connector Locations .......11

1.7 Safety Precautions............................................................12

1.8 Jumper Settings................................................................13

1.8.1 How to set jumpers ...................................................13

1.8.2 CPU clock ratio setting (SW1) .................................13

1.8.4 CMOS clear (J1)................................................................15

1.8.5 Watchdog timer output (J2) ......................................15

1.8.5 DiskOnChip® 2000 Flash disk address select (SW3) ....16

1.9 System Memory................................................................18

1.9.1 Sample calculation: DIMM memory capacity................18

1.9.2 Supplementary information about DIMMs ..............19

1.10 Memory Installation Procedures ....................................20

1.11 Cache Memory .................................................................20

1.12 CPU Installation...............................................................21

Chapter 2 Connecting Peripherals ............................ 23

2.1 Primary (CN1) and Secondary (CN2) IDE Connectors24

2.2 Floppy Drive Connector (CN3).......................................25

2.3 Parallel Port (CN4) ..........................................................25

2.4 SCSI Connector (CN5) ....................................................26

2.5 USB Port (CN6) ................................................................27

2.6 VGA Connector (CN7) ....................................................27

2.7 10/100Base-T Ethernet Connector (CN8) ......................28

2.8 Serial Ports (CN9: COM1; CN10: COM2)....................28

2.9 PS/2 Keyboard and Mouse Connector (CN11) .............29

2.10 External Keyboard Connector (CN12) ..........................29

2.11 Infrared (IR) Connector (CN13) ....................................30

2.12 CPU Fan Connector (CN14) ...........................................30

2.13 Front Panel Connectors (CN16, CN17, CN18, CN19,

CN21 and CN22).........................................................................31

2.13.1 Keyboard lock and power LED (CN16) .................31

2.13.2 External speaker (CN17) ................................................31

2.13.3 Reset (CN18)...........................................................31

2.13.4 HDD LED (CN19) ..................................................32

2.13.5 ATX soft power switch (CN21)..............................32

2.14 ATX Power Control Connectors (CN20 and CN21).....32

2.14.1 ATX feature connector (CN20) and soft power

switch connector (CN21) ...................................................32

CN20 32

2.14.2 Controlling the soft power switch...........................33

Award BIOS Setup........................................................ 35

3.1 Introduction......................................................................36

3.2 Entering Setup..................................................................36

3.3 Standard CMOS Features...............................................37

3.4 Advanced BIOS Features ................................................38

3.4.1 Virus Warning..........................................................39

3.4.2 Quick Power On Self Test ........................................40

3.4.3 Boot Up Floppy Seek ................................................40

3.4.4 Boot Up NumLock Status .........................................40

3.4.5 Gate A20 Option .......................................................40

3.4.6 Typematic Rate Setting.............................................40

3.4.7 Typematic Rate (Chars/Sec) .....................................41

3.4.8 Typematic Delay (msec) ...........................................41

3.4.9 Security Option .........................................................41

3.4.10 OS Select for DRAM > 64MB................................41

3.4.11 Video BIOS Shadow ...............................................41

3.4.12 C8000-CBFFF Shadow / DC000-DFFFF Shadow .42

3.5 Advanced Chipset Features.............................................42

3.5.1 Memory Hole At 15 M ~ 16 M.................................43

3.5.2 AGP Aperture Size (MB)..........................................43

3.6 Integrated Peripherals.....................................................43

3.6.1 IDE HDD Block Mode .............................................43

3.6.2 IDE Primary Master/Slave PIO/UDMA Mode,

IDE Secondary Master/Slave PIO/UDMA Mode (Auto) ..44

3.6.3 Onboard FDC Controller ..........................................44

3.6.4 Onboard Serial Port 1 (3F8H/IRQ4).........................44

3.6.5 Onboard Serial Port 2 (2F8H/IRQ3).........................44

3.6.6 Onboard Parallel Port (378H/IRQ7) .........................44

3.6.7 Parallel Port Mode (ECP + EPP) ..............................44

3.6.8 ECP Mode Use DMA ...............................................45

3.7 Power Management Setup ..............................................45

3.7.1 Power Management ..................................................46

3.7.2 HDD Power Down ....................................................46

3.7.3 Soft-Off by PWR-BTTN...........................................46

3.7.4 Wakeup Event ...........................................................47

3.7.5 IRQs Activity Monitoring.........................................47

3.8 PnP/PCI Configurations..................................................48

3.9 PC Health Status ..............................................................48

3.10 Frequency Control ...........................................................49

3.11 Load Setup Defaults.........................................................49

3.12 Set Password.....................................................................49

3.13 Save & Exit Setup ............................................................50

3.14 Exit Without Saving.........................................................50

Chapter 4 AGP SVGA Setup....................................... 51

4.1 Before You Begin .............................................................52

4.2 Features.............................................................................52

4.3 Installation ........................................................................53

Chapter 5 LAN Configuration..................................... 55

5.1 Introduction......................................................................56

5.2 Features.............................................................................56

5.3 Driver Installation............................................................57

5.4 Windows 9X Drivers Setup

Procedure ....................................................................................58

5.5 Windows NT Drivers Setup Procedure..........................65

5.6 Windows 2000 Drivers Setup Procedure .......................70

Chapter 6 SCSI Setup and Configurations................ 77

6.1 Introduction......................................................................78

6.2 Before You Begin .............................................................78

6.3 Basic Rules for SCSI Host Adapter and Device Installa-

tion 79

6.4 Configuring the SCSI Adapter .......................................79

6.5 SCSI Terminators ............................................................80

6.6 SDMS Drivers...................................................................81

Appendix A Programming the Watchdog Timer....... 99

A.1 Programming the Watchdog Timer .............................100

Appendix B Pin Assignments ................................... 103

B.1 IDE Hard Drive Connector (CN1, CN2)......................104

B.2 Floppy Drive Connector (CN3).....................................105

B.3 Parallel Port Connector (CN4) .....................................106

B.4 SCSI Connector (CN5) ..................................................107

B.5 USB Connector (CN6) ...................................................108

B.6 VGA Connector (CN7) ..................................................108

B.7 Ethernet 10/100Base-T RJ-45 Connector (CN8).........109

B.8 COM1/COM2 RS-232 Serial Port (CN9, CN10).........109

B.9 Keyboard and Mouse Connnector (CN11) ..................110

Inhaltsverzeichnis

Andere Advantech Computerhardware Handbücher

Advantech

Advantech MIO-5375 Bedienungsanleitung

Advantech

Advantech SOM-6894 Bedienungsanleitung

Advantech

Advantech PPC-3211W Bedienungsanleitung

Advantech

Advantech AMAX-5400 Series Bedienungsanleitung

Advantech

Advantech PCI-1720 Bedienungsanleitung

Advantech

Advantech TREK-550-A00E Bedienungsanleitung

Advantech

Advantech MIC-715-OX Bedienungsanleitung

Advantech

Advantech PCA-6275 Bedienungsanleitung

Advantech

Advantech FWA-3050 Bedienungsanleitung

Advantech

Advantech PCM-3753I Bedienungsanleitung

Advantech

Advantech DS-570 Bedienungsanleitung

Advantech

Advantech MIO-5375 Installations- und Betriebshandbuch

Advantech

Advantech PCE-5130 Bedienungsanleitung

Advantech

Advantech SOM-4463 B2 Bedienungsanleitung

Advantech

Advantech SOM-2532 Series Bedienungsanleitung

Advantech

Advantech HPC-8000 Bedienungsanleitung

Advantech

Advantech MIC-75M20 Installations- und Betriebshandbuch

Advantech

Advantech PCIe-1674 Bedienungsanleitung

Advantech

Advantech PCI-1710 Bedienungsanleitung

Advantech

Advantech PCL-848A/B Bedienungsanleitung

Advantech

Advantech SOM-4463D-S8B2E Bedienungsanleitung

Advantech

Advantech POC-824 Bedienungsanleitung

Advantech

Advantech PCA-6148 Bedienungsanleitung

Advantech

Advantech PCA-6753 Installations- und Betriebshandbuch

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

AMD

AMD Phenom II Betriebshandbuch

Intel

Intel NUC 12 Pro Bedienungsanleitung

dbx

dbx Zone Pro 1260 Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung