Advantech POC-W243 Series Bedienungsanleitung
User Manual
POC-W243 Series
23.8" TFT LCD Point-of-Care
Terminal with Intel® Core™ i7
Processor
POC-W243 Series User Manual ii
User Instructions
The document combines text and illustrations to provide a comprehensive overview
of the system. The information is presented as step-by-step sequential actions that
inform users how to use the device.
Definitions
Part No. 2008CW2400 Edition 1
Printed in Taiwan September 2021
Warning! A WARNING statement provides important information about a poten-
tially hazardous situation that, if not avoided, could result in death or
serious injury.
Caution! A CAUTION statement provides important information about a poten-
tially hazardous situation that, if not avoided, may result in minor or
moderate injury to the user or patient, or damage to the equipment or
other property.
Note! A NOTE provides additional optional information intended to avoid
inconvenience during operation.
iii POC-W243 Series User Manual
Safety Instructions
1. Read these safety instructions throughly before handling the equipment.
2. Retain this user manual for future reference.
3. Use of the equipment requires a full understanding and strict observation of all
portions of these instructions. Observe all warnings and cautions provided
throughout this manual and on equipment labels.
4. The equipment should only be repaired or maintained by qualified service per-
sonnel. We recommend that a service contract be obtained with Advantech
Customer Service in order for all repairs to be carried out by Advantech. Other-
wise, the correct functioning of the equipment may be compromised.
5. If one of the following occurs, have the equipment checked by qualified service
personnel:
The power cord or plug is damaged.
Liquid has penetrated the equipment.
The equipment has been exposed to moisture.
The equipment is malfunctioning, or does not operate according to the user
manual.
The equipment has been dropped and damaged.
The equipment shows obvious signs of breakage.
6. Disconnect the equipment from any AC outlet before cleaning. Use only a damp
cloth for cleaning. Do not use liquid or spray detergents.
7. Protect the equipment from humidity.
8. Place the equipment on a reliable surface during installation. Dropping or letting
it fall may cause damage.
9. For pluggable equipment, the power outlet socket must be located near the
equipment and easily accessible.
10. Ensure that the voltage of the power source is correct before connecting the
equipment to a power outlet.
11. Position the power cord away from high-traffic areas and do not place anything
over the power cord.
Warning! Because of the danger of electric shock, never remove the device cover
while it is in operation or connected to a power outlet.
Caution! To avoid short-circuiting and otherwise damaging the device, do not
allow fluids to come in contact with the device. If fluids are accidentally
spilled on the equipment, remove the affected unit from service as soon
as possible and contact the service personnel to verify that patient
safety is not compromised.
Caution! To prevent overheating, do not cover the openings or place the device in
direct sunlight or near radiant heaters.
POC-W243 Series User Manual iv
12. If the equipment is left idle for a long time, disconnect it from the power source
to avoid damage from transient overvoltage.
13. If the device is losing dramatic time or the BIOS configuration has reset to the
default settings, the battery has no charge.
14. The device is equipped with a battery-powered real-time clock circuit. Batteries
are at risk of exploding if incorrectly replaced. Replace only with same or equiv-
alent type as recommended by the manufacturer.
15. Discard all used batteries according to the manufacturer’s instructions. To pro-
tect the environment, follow all national requirements for disposing of the equip-
ment.
16. Improper installation of a VESA mount can result in serious personal injury.
Therefore, VESA mount installation should only be conducted by a qualified
technician. Contact a qualified service technician or your sales representative
for this service. Mount installation instructions are provided in Appendix A.
17. For users, when operating the equipment, do not touch the SIP/SOPs and the
patient at the same time.
18. When networking with electrical devices, the operator is responsible for ensur-
ing that the resulting system meets the requirements set forth by the following
standards:
–EN 60601-1 (IEC 60601-1)
Medical electrical equipment
Part 1: General requirements for safety
–EN 60601-1-1 (IEC 60601-1-1)
Medical electrical equipment
Part 1-1: General requirements for safety
Collateral standard: Safety requirements for medical electrical systems
–EN 60601-1-2 (IEC 60601-1-2)
Medical electrical equipment
Part 1-2: General requirements for safety
Collateral standard: Electromagnetic compatibility; requirements and tests
Caution! Do not leave the equipment in an uncontrolled environment with a stor-
age temperature of below -20 °C (-4 °F) or above 60 °C (140 °F) as this
may damage the equipment.
Caution! Do not replace the battery by yourself. Contact a qualified technician or
your local sales representative for assistance.
Caution! A battery charging indicator is not included with this device. Indicators
are added at the end of the assembly process.
Caution! When servicing the device, always use replacement parts that are quali-
fied to Advantech standards. Advantech Medical cannot warrant or
endorse the safe performance of third-party replacement parts for use
with our medical device.
v POC-W243 Series User Manual
19. All accessories connected to the analog and digital interfaces must comply with
the respective nationally harmonized IEC standards (i.e., IEC 60950 for data
processing equipment, IEC 60065 for video equipment, IEC 61010-1 for labora-
tory equipment, and IEC 60601-1 for medical equipment). Furthermore, all con-
figurations must comply with the IEC 60601-1-1 specifications. Any person who
connects additional equipment to the signal input or output port is configuring a
medical system and, therefore, is responsible to ensure the system remains
compliant with IEC 60601-1-1 specifications. The equipment is designed for
exclusive interconnection with IEC 60601-1-certified equipment in the patient
environment and IEC 60XXX-certified equipment outside of the patient environ-
ment. If in doubt, consult Advantech’s technical services department or your
local sales representative.
20. Grounding reliability can only be achieved when the equipment is connected to
an equivalent receptacle marked “hospital only” or “hospital grade”.
21. The equipment should be powered by an approved power cable that supports
the voltage of the power outlet and complies with relevant safety standards in
your particular country.
Caution! Use suitable mounting apparatus to avoid risk of injury.
Warning! Do not modify the equipment without express authorization from the
manufacturer.
Warning! To avoid risk of electric shock, this equipment must be connected to a
supply mains with protective earthing.
POC-W243 Series User Manual vi
Explanation of Graphical Symbols
Product Disposal
Within the European Union
FCC Class B
This equipment has been tested and found to comply with the limits for a Class B dig-
ital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interfer-
ence when the equipment is operated in a residential environment. The equipment
generates, uses, and can radiate radio frequency energy. If not installed and used in
accordance with the user manual, it may cause harmful interference to radio commu-
nications.
IEC 60878 and ISO 3864-B.3.6: Warning: dangerous voltage
ISO 7000-0434: Caution, consult accompanying documents
ISO 7000-1641: Follow operating instructions or consult instructions for
use
IEC 60417 -5009: Standby
IEC 60417-5031: Direct current
IEC 60417-5021: Equipotentiality
ISO 7010-M002: Follow instructions for use
EU-wide legislation, as implemented in each member state,
requires that waste electrical and electronic products carrying the
mark shown on the left must be disposed of separately from normal
household waste. This includes monitors and electrical accesso-
ries, such as signal cables and power cables. When disposing of
display products, follow the guidance of your local authority or con-
sult your local sales representative and, if applicable, follow any
agreements made.
The mark on electrical and electronic products only applies to the
current European Union member states.
vii POC-W243 Series User Manual
However, even when installed and used correctly, there is still no guarantee that
interference will not occur. To determine whether the equipment is causing harmful
interference to radio or television reception, try turning the equipment off and on
again. If interference is occurring, the user is encouraged to try to correct the interfer-
ence with one or more of the following measures:
Reorient or relocate the receiving antenna
Increase the separation between the equipment and the receiver
Connect the equipment to a power outlet on a circuit different from that to which
the receiver is connected
Consult the dealer or an experienced radio/TV technician for assistance
Packing List
Before installing your point-of-care terminal, ensure that the following items were
included with the shipment:
1 x POC-W243 point-of-care terminal
1 x Power adapter
1 x CD-ROM disc with drivers and utilities
Mount kit and screws
1 x VESA mount note
1 x China RoHs declaration
Additional Information and Assistance
Contact your distributor, sales representative, or Advantech's customer service cen-
ter for technical support if you require additional assistance. Please have the follow-
ing information ready before calling:
Product name and serial number
Description of your peripheral attachments
Description of your software (operating system, version, application software,
etc.)
A complete description of the problem
The exact wording of any error messages
Warning! Any changes or modifications made to the equipment that are not
expressly approved by the relevant standards authority could void your
authority to operate the equipment.
Warning! There are no user-serviceable parts inside the device. Refer all servic-
ing to qualified service personnel. Only the accessories indicated on the
above packing list have been tested and approved for use with the
device. Accordingly, we strongly recommended that only these accesso-
ries be used in conjunction with the device. Otherwise, the correct func-
tioning of the device may be compromised.
Note! This equipment is a source of electromagnetic waves. Before use,
ensure there are no EMI-sensitive devices in the surrounding area that
could malfunction as a result of its use.
.
POC-W243 Series User Manual viii
Environmental Protection
Follow national requirements to dispose of the unit.
Manufacturer
Advantech Co., Ltd.
No.1, Alley 20, Lane 26, Rueiguang Road, Neihu District, Taipei,
Taiwan 114, R.O.C.
TEL: (02) 2792-7818
Distributed in Europe by
Advantech Europe GmbH Kolberger Straße 7
D-40599 Düsseldorf, Germany
Tel: 49-211-97477350
Fax: 49-211-97477300
Visit Advantech at www.advantech.com or www.advantech.com.tw if you require
more information.
ix POC-W243 Series User Manual
Contents
Chapter 1 General Information ............................1
1.1 Introduction ............................................................................................... 2
1.2 Specifications............................................................................................ 2
1.3 System Diagram........................................................................................ 4
Figure 1.1 POC-W243 System Diagram...................................... 4
Figure 1.2 VESA Mount Installation............................................. 4
Figure 1.3 POC-W243 Front Panel.............................................. 5
1.3.1 Optional Modules .......................................................................... 5
1.3.2 Cleaning and Disinfecting ............................................................. 5
1.4 Operating Principle.................................................................................... 5
1.5 Intended User Profile ................................................................................ 6
Chapter 2 System Setup.......................................7
2.1 Quick System Tour.................................................................................... 8
2.1.1 Front View..................................................................................... 8
Figure 2.1 POC-W243 Front View ............................................... 8
2.1.2 Rear View ..................................................................................... 9
Figure 2.2 POC-W243 Rear View................................................ 9
Figure 2.3 I/O Layout View .......................................................... 9
2.2 Installation Procedures............................................................................ 10
2.2.1 Power Cord Connection.............................................................. 10
Figure 2.4 Connecting the Power Cord ..................................... 10
2.2.2 Ground Pin Connection............................................................... 11
Figure 2.5 POC-W243 Equipotential Terminal Pin .................... 11
Figure 2.6 Grounding Cable with Connector ............................. 11
2.3 BIOS Setup ............................................................................................. 11
2.4 Software Installation................................................................................ 12
2.5 Driver Installation .................................................................................... 12
Chapter 3 Operation and Safety ........................17
3.1 General Safety Guide.............................................................................. 18
3.2 Protect the Optical Drive ......................................................................... 18
3.3 Thermal Management ............................................................................. 18
3.4 Disconnect the Power ............................................................................. 19
Appendix A VESA Mounting..................................21
A.1 VESA Mount Installation ......................................................................... 22
Figure A.1 VESA Mount Bracket................................................ 22
POC-W243 Series User Manual x
Inhaltsverzeichnis
Andere Advantech Computerhardware Handbücher
Advantech
Advantech PCIE-1803 Bedienungsanleitung
Advantech
Advantech PCE-5133 Installations- und Betriebshandbuch
Advantech
Advantech PCA-6188 Bedienungsanleitung
Advantech
Advantech USB-4750-AE Bedienungsanleitung
Advantech
Advantech PCM-9591 Installations- und Betriebshandbuch
Advantech
Advantech AIMB-592 Bedienungsanleitung
Advantech
Advantech PPC RFID 98R3P300010 Installations- und Betriebshandbuch
Advantech
Advantech ROM-5722 Bedienungsanleitung
Advantech
Advantech PCA-6010 Bedienungsanleitung
Advantech
Advantech PCM-3753I Bedienungsanleitung
Advantech
Advantech PCE-7B13-0AA1 Installations- und Betriebshandbuch
Advantech
Advantech PCL-734 Bedienungsanleitung
Advantech
Advantech EPD-660 Bedienungsanleitung
Advantech
Advantech ARK-3202 Bedienungsanleitung
Advantech
Advantech MIC-3365 Bedienungsanleitung
Advantech
Advantech SOM-2532 Series Bedienungsanleitung
Advantech
Advantech MIO-5376 Bedienungsanleitung
Advantech
Advantech EPD-332 Bedienungsanleitung
Advantech
Advantech AIMB-217 Bedienungsanleitung
Advantech
Advantech POS-761F Bedienungsanleitung
Beliebte Computerhardware Handbücher anderer Marken
EMC2
EMC2 VNX Series Betriebsanleitung
Panasonic
Panasonic DV0PM20105 Bedienungsanleitung
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung
Gigabyte
Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung
Raidon
Raidon iT2300 Bedienungsanleitung
National Instruments
National Instruments PXI-8186 Bedienungsanleitung
