Advantech PCL-818L Bedienungsanleitung

Chapter 1 General information 1

General information

CHAPTER

2PCL-818L User's Manual

Introduction

The PCL-818L is a high performance multi-function data acquisition

card for IBM PC/XT/AT or compatible computers. It offers the five

most desired measurement and control functions: 12-bit A/D conver-

sion, D/A conversion, digital input, digital output and timer/counter.

Automatic channel scanning circuitry and on-board SRAM let you

perform multiple-channel A/D conversion with DMA and individual

channel gains.

The PCL-818L is an advanced new version of our popular PCL-818.

A custom 160-pin ASIC chip integrates the functions of the full-size

PCL-818. This chip gives you maximum accuracy and reliability,

along with minimum cost, size and power consumption.

The resulting half-size card is fully software compatible with the PCL-

818. This puts rich software support and a wide variety of external

signal conditioning boards at your disposal.

The PCL-818L is excellent for data acquisition, process control,

automatic testing and factory automation.

Features

• 16 single-ended or eight differential analog inputs, switch selectable

• 12-bit A/D, up to 40 KHz sampling rate with DMA transfer and

different gain for each channel.

• Software programmable gain values

• Software selectable analog input ranges (bipolar):

Two ranges, selected by jumper JP7

±10, ±5, ±2.5, ±1.25 or ±5, ±2.5, ±1.25, ±0.625

• 16 digital inputs and 16 digital outputs, TTL/DTL compatible

• One 12-bit analog output channel

• Flexible triggering options: software trigger, programmable pacer

trigger and external pulse trigger.

• Data transfer by program control, interrupt handler routine or DMA

• New-technology 160 pin 1.0 mm CMOS ASIC chip

Chapter 1 General information 3

Specifications

åAnalog Input (A/D converter)

• Channels: 16 single-ended or 8 differential, switch selectable

• Resolution: 12 bits

• Input ranges (bipolar, VDC): ±0.625, ± 1.25, ±2.5, ±5 or

±1.25, ± 2.5, ±5, ±10

All input ranges are software programmable.

• Overvoltage: Continuous ±30 V max.

• Conversion type: Successive approximation

• Conversion rate: 40 KHz max.

• Accuracy: ±(0.01% of reading), ±1 bit

• Linearity: ±1 bit

• Trigger mode: Software trigger, on-board programmable pacer

trigger or external trigger

• Ext. trigger: TTL compatible.

Load is 0.4 mA max. at 0.5 V and -0.05 mA max. at 2.7 V

• Data transfer: Program, interrupt or DMA

åAnalog output (D/A converter)

• Channels: 1 channel

• Resolution: 12 bits

• Output range: 0 to +5 (+10) V with on-board -5 (-10) V reference.

Max. ±10 V with external DC or AC reference

• Reference:

Internal: -5 V or -10 V

External DC or AC: ±10 V max.

• Conversion type: 12 bit monolithic multiplying

• Linearity: ±0.5 bit

• Output drive: ±5 mA max.

• Settling time: 5 microseconds

4PCL-818L User's Manual

åDigital input

• Channel: 16 bits

• Level: TTL compatible

• Input voltage:

Low: 0.8 V max.

High: 2.0 V min.

• Input load:

Low: 0.4 mA max. at 0.5 V

High: 0.05 mA max. at 2.7 V

åDigital Output

• Channel: 16 bits

• Level: TTL compatible

• Output voltage:

Low: Sink 8 mA at 0.5 V max.

High: Source -0.4 mA at 2.4 V min.

åProgrammable timer/counter

• Device: Intel 8254 or equivalent

• Counters: 3 channels, 16 bit.

2 channels are permanently configured as programmable pacers

1 channel is free for your applications

• Input, gate: TTL/CMOS compatible

• Time base:

Pacer channel 1:10 MHz or 1 MHz, switch selectable

Pacer channel 2:Takes input from channel 1

Pacer channel 0:Internal 100 KHz or external clock (10 MHz max).

Source selected with Timer/Counter Enable

• Pacer output: 0.00023 Hz (71 minutes/pulse) to 2.5 MHz

åInterrupt channel

• Level: IRQ 2 to 7, software selectable

• Enable: Via INTE bit of Control Register (BASE+9)

Chapter 1 General information 5

åDMA channel

• Level: 1 or 3, jumper selectable

• Enable: Via DMAE bit of Control Register (BASE+9)

åGeneral

• Power consumption:

+5 V: 210 mA typical, 500 mA max.

+12 V: 20 mA typical, 100 mA max.

-12 V: 20 mA typical, 40 mA max.

• I/O connector: 20 pin post headers for I/O connection. Adapter

available to convert to DB-37 connector

• Analog input/output/counter connector: DB-37

•I/O base: Requires 16 consecutive address locations. Base address

definable by the DIP switch SW1 for address line A9-A4. (Factory

setting is Hex 300)

• Operating temp: 0 to +50oC

• Storage temp: -20 to +65oC

Daughterboards

We offer a wide variety of optional daughterboards to help you get the

most from your PCL-818L. You will need the PCLD-774 Analog

Expansion Board or PCLD-8115 Wiring Terminal Board to make

connections.

åPCLD-789 Amplifier/Multiplexer board

This analog input-signal conditioning board multiplexes up to 16

differential inputs to one A/D input channel. A high grade instrumen-

tation amplifier provides switch selectable gains of 0.5, 1, 2, 10, 50,

100, 200, 1000 or user defined.

åPCLD-788 Relay Multiplexer Board

This board multiplexes up to 16 differential inputs to one analog

output channel. It offers isolated break-before-make high voltage

switching and a CJC circuit for thermocouple measurement.

6PCL-818L User's Manual

åPCLD-787 8-channel simultaneous sample and hold board

This board lets you simultaneously acquire up to eight analog inputs

with less than 30 nsec of channel-to-channel sample time uncertainty.

åPCLD-786 AC/DC power SSR and relay driver board

This board holds eight opto-isolated solid state relay modules and

provides an additional eight outputs to drive external relays.

åPCLD-785B and PCLD-885 relay output boards

These boards let you control relays through the PCL-818L's 16-bit

digital output channels. PCLD-785B provides 24 SPDT relays, while

the PCLD-885 provides 16 SPST power relays.

åPCLD-782B Isolated D/I Board

This board provides 24 opto-isolated digital input channels and a

cable to connect to the PCL-818L's digital input ports.

åPCLD-779 8-channel relay-isolated multiplexer

and amplifier board

This board lets you easily make multi-channel temperature measure-

ments. We designed it for the cost-sensitive customer who requires

precision, low-level signal measurement and isolation for industrial

applications.

åPCLD-770 with PCLD-7701 and PCLD-7702 modules

PCLD-770 accepts signals from up to eight PCLD-7701 or PCLD-

7702 signal conditioning modules and multiplexes them into a single

analog input channel. PCLD-7701 is an isolated amplifier module and

the PCLD-7702 is an amplifier with I/V source. You can cascade up to

ten PCLD-770s for a total of 80 differential input channels.

åPCLD-5B16 module carrier board

This board holds 16 5B-series input and/or output modules. We supply

5B modules for wide variety of signal input signals, including

thermocouples, strain gauges and RTDs.

Chapter 1 General information 7

Software support

The PCL-818L comes with a powerful and easy-to-use software driver

whose functions can be accessed by referring to a user-defined

Parameter Table. With these driver functions your application pro-

gramming becomes much easier, especially when you want to use

some of the sophisticated features available from the PCL-818L, such

as interrupt or DMA data transfer.

You can also use the following application software packages with the

PCL-818L.

åDADiSP

Spreadsheet software for off-line data analysis and digital signal

processing. DSP Development Corp.

åLABTECH NOTEBOOK

Integrated data acquisition software with real time analysis, display

and process control. Laboratory Technologies Corp.

åLABTECH ACQUIRE

Low cost data acquisition software . Laboratory Technologies Corp.

åDAXpert 1.0

DOS-based general purpose data acquisition package. You can quickly

set up an experiment, acquire data and graphically display the results

on the screen in real time. Advantech.

åGENIE 1.1

Windows-based general purpose data acquisition package. Its intui-

tive, object-oriented graphical user interface simplifies control

strategy and display setups. Advantech

åPC-Scope

This software turns your PC into a storage-oscilloscope. Advantech

8PCL-818L User's Manual

åSNAP-MASTER for Microsoft Windows

A PC-based data-acquisition, analysis and display software tool for

Microsoft Windows. This is the first Windows-based package that

allows control of sensors, transducers, actuators and signal condition-

ers as part of the data-acquisition system. HEM Data Corporation

åGENESIS

Icon-based process-control software for graphically creating, simulat-

ing and executing real-time data acquisition and process control

strategies. ICONICS, Inc.

åPC-Streamer

A menu-driven, user friendly data acquisition software package

capable of continuously streaming up to 16 channels of acquired data

to disk. It can store at up to 200 KB/sec with no limitations on file

size. Advantech

Contact your local PC-LabCard representative for more information

about these software packages.

Andere Handbücher für PCL-818L

Inhaltsverzeichnis

Andere Advantech Computerhardware Handbücher

Advantech

Advantech CPC-2520 Bedienungsanleitung

Advantech

Advantech PCE-5124 Bedienungsanleitung

Advantech

Advantech TREK-550-A00E Bedienungsanleitung

Advantech

Advantech B+B SMARTWORX IE-iMcV-E1-Mux/4 Bedienungsanleitung

Advantech

Advantech IPC-610B Bedienungsanleitung

Advantech

Advantech PCA-6654 Bedienungsanleitung

Advantech

Advantech PCA-6743 Installations- und Betriebshandbuch

Advantech

Advantech PCE-3026 Installations- und Betriebshandbuch

Advantech

Advantech PCI-1716 Bedienungsanleitung

Advantech

Advantech ITA-260 Series Installations- und Betriebshandbuch

Advantech

Advantech PCIE-1730H Installations- und Betriebshandbuch

Advantech

Advantech PCA-6143P Bedienungsanleitung

Advantech

Advantech PCM-3641P Installations- und Betriebshandbuch

Advantech

Advantech PCM-26R1EC Bedienungsanleitung

Advantech

Advantech MIC-3365 Bedienungsanleitung

Advantech

Advantech PCE-5B12-07 Installations- und Betriebshandbuch

Advantech

Advantech FWA-3050 Bedienungsanleitung

Advantech

Advantech PCL-841 Series Bedienungsanleitung

Advantech

Advantech PCA-6151 Bedienungsanleitung

Advantech

Advantech SOM-9590 Bedienungsanleitung

Advantech

Advantech PPC-6150A Bedienungsanleitung

Advantech

Advantech AMAX-5070 Bedienungsanleitung

Advantech

Advantech PCA-6179 Bedienungsanleitung

Advantech

Advantech PCA-6180 Series Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

AMD

AMD Phenom II Betriebshandbuch

Intel

Intel NUC 12 Pro Bedienungsanleitung

dbx

dbx Zone Pro 1260 Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung