Advantech APAX-5202P Bedienungsanleitung
APAX-5202P
2-Port AMONet
RS-485 Master Module
User Manual
APAX-5202P User Manual ii
Copyright
The documentation and the software included with this product are copy-
righted 2010 by Advantech Co., Ltd. All rights are reserved. Advantech
Co., Ltd. reserves the right to make improvements in the products
described in this manual at any time without notice. No part of this man-
ual may be reproduced, copied, translated or transmitted in any form or
by any means without the prior written permission of Advantech Co., Ltd.
Information provided in this manual is intended to be accurate and reli-
able. However, Advantech Co., Ltd. assumes no responsibility for its use,
nor for any infringements of the rights of third parties, which may result
from its use.
Acknowledgements
AMONet and APAX-5202P are trademarks of Advantech Inc.
Intel and Pentium are trademarks of Intel Corporation.
Microsoft Windows and MS-DOS are registered trademarks of
Microsoft Corp.
All other product names or trademarks are properties of their respective
owners.
Part No. 2003120210 1st Edition
Printed in Taiwan December 2010
iii
Product Warranty (2 years)
Advantech warrants to you, the original purchaser, that each of its prod-
ucts will be free from defects in materials and workmanship for two years
from the date of purchase.
This warranty does not apply to any products which have been repaired or
altered by persons other than repair personnel authorized by Advantech,
or which have been subject to misuse, abuse, accident or improper instal-
lation. Advantech assumes no liability under the terms of this warranty as
a consequence of such events.
Because of Advantech’s high quality-control standards and rigorous test-
ing, most of our customers never need to use our repair service. If an
Advantech product is defective, it will be repaired or replaced at no
charge during the warranty period. For out-of-warranty repairs, you will
be billed according to the cost of replacement materials, service time and
freight. Please consult your dealer for more details.
If you think you have a defective product, follow these steps:
1. Collect all the information about the problem encountered. (For
example, CPU speed, Advantech products used, other hardware
and software used, etc.) Note anything abnormal and list any
onscreen messages you get when the problem occurs.
2. Call your dealer and describe the problem. Please have your man-
ual, product, and any helpful information readily available.
3. If your product is diagnosed as defective, obtain an RMA (return
merchandize authorization) number from your dealer. This allows
us to process your return more quickly.
4. Carefully pack the defective product, a fully-completed Repair and
Replacement Order Card and a photocopy proof of purchase date
(such as your sales receipt) in a shippable container. A product
returned without proof of the purchase date is not eligible for war-
ranty service.
5. Write the RMA number visibly on the outside of the package and
ship it prepaid to your dealer.
APAX-5202P User Manual iv
CE
This product has passed the CE test for environmental specifications
when shielded cables are used for external wiring. We recommend the use
of shielded cables. This kind of cable is available from Advantech. Please
contact your local supplier for ordering information.
Technical Support and Assistance
Step 1. Visit the Advantech web site at www.advantech.com/support
where you can find the latest information about the product.
Step 2. Contact your distributor, sales representative, or Advantech's cus-
tomer service center for technical support if you need additional
assistance. Please have the following information ready before
you call:
- Product name and serial number
- Description of your peripheral attachments
- Description of your software (operating system, version, appli-
cation software, etc.)
- A complete description of the problem
- The exact wording of any error messages
Packing List
Before setting up the system, check that the items listed below are
included and in good condition. If any item does not accord with the
table, please contact your dealer immediately.
In addition to this User Manual, the package should also include the fol-
lowing items:
1. APAX-5202P: 2-Port AMONet RS-485 Master Card
2. Quick Start User Manual
v
Contents
Chapter 1 Introduction ..................................................... 2
1.1 Card Description ............................................................... 2
Figure 1.1:Functional Block Diagram of APAX-5202P 2
Figure 1.2:APAX-5202P Applications .......................... 3
1.2 Features ............................................................................. 3
1.3 Specifications .................................................................... 3
1.4 Supported Software ........................................................... 4
1.4.1 Programming Library .................................................... 4
1.4.2 Advantech AMONet Device Manager .......................... 4
1.5 Application Development ................................................. 4
Figure 1.3:Application Development ............................ 4
Chapter 2 Installation ....................................................... 6
2.1 Unpacking ......................................................................... 6
2.2 Case Design....................................................................... 7
Figure 2.1:APAX-5202P Case Design .......................... 7
2.3 Hardware Installation ........................................................ 8
2.3.1 Hardware Configuration ................................................ 8
2.3.2 PCI-Slot Socket Selection .............................................. 8
2.3.3 Installation Procedure .................................................... 8
2.3.4 Troubleshooting ............................................................. 8
2.4 Driver Installation ............................................................. 9
2.5 Connector Descriptions ..................................................... 9
2.5.1 AMONet Extension (CN1 & CN2) ............................... 9
Figure 2.2:AMONet Extension ...................................... 9
Figure 2.3:RS-485 Extension Port ................................. 9
Figure 2.4:AMONet Slave Module Address Setting ... 10
2.6 Board ID Switch (SW4) .................................................. 10
Appendix A Motion Signal Connections........................... 12
A.1 Digital Input .................................................................... 12
Table A.1:STA Pins ..................................................... 12
Table A.2:STP Pins ...................................................... 13
Table A.3:PEL and MEL Pins ..................................... 13
Table A.4:ORG Pins .................................................... 14
Table A.5:SLD Pins ..................................................... 14
Table A.6:ALM Pins .................................................... 14
Table A.7:INP Pins ...................................................... 15
Table A.8:RDY Pins .................................................... 15
Table A.9:DI Pins ........................................................ 15
Table A.10:LTC Pins ................................................... 15
Table A.11:EMG Pins .................................................. 16
A.2 Digital Output.................................................................. 16
Figure A.1:Relay Type Output .................................... 16
Table A.12:SVON Pins ................................................ 16
Table A.13:ERC Pins ................................................... 17
APAX-5202P User Manual vi
Table A.14:RALM Pins ............................................... 17
Table A.15:CMP Pins .................................................. 17
Table A.16:OUT1&OUT2 Pins ................................... 17
Table A.17:BSY Pins ................................................... 18
A.3 DDA Pulse Output .......................................................... 18
Figure A.2:Differential Mode ...................................... 18
Figure A.3:Single Ended Mode ................................... 18
Table A.18:DDA Pulse Pins ........................................ 19
Table A.19:Encoder Pins ............................................. 20
2
CHAPTER
1
Introduction
This chapter gives an overview of the
product features, applications, and
specifications for APAX-5202P
Sections include:
• Card Description
• Features
• Specifications
• Supported Software
• Application Development
APAX-5202P User Manual 2
Chapter 1 Introduction
APAX-5202P is a standard PCI-Bus motion controller with a high-speed
real-time network extension called AMONet. Advantech optimizes the
software to help you get your advanced motion profiles as quickly as pos-
sible. APAX-5202P is equipped with 2 master rings, and each master ring
can connect with up to 64 slave modules. There are 2 categories of slave
modules; one is for 4-axis motion control; the second is for digital I/O
with 3 types, 32-IN, 32-OUT, 16-IN & 16-0UT.
1.1 Card Description
APAX-5202P is a Standard AMONet PCI-Bus Interface Master Card.
Figure 1.1: Functional Block Diagram of APAX-5202P
3 Chapter1
Figure 1.2: APAX-5202P Applications
1.2 Features
• 2 Rings of AMONet master
• Programmable baud-rate up to 20 Mbps transfer rate
• Max. 128 AMONet digital slave modules support
• Easy installation with RJ45 phone jack and LED diagnostic
1.3 Specifications
• Number of Rings: 2
• Transmission Speeds: 2.5, 5, 10, 20 Mbps with automatic flow control
• Serial Interface: Half duplex RS-485 with transformer isolation
• Cable Type: CAT5 UTP/STP Ethernet cable
• Surge Protection: 10 kV
• Communication Distance: Max. 100 m (20 Mbps/32 slave modules)
• Communication Slave Module Capacity: 2 Rings with Max. 128
• Power Consumption: +5 VDC at 0.5 A typical
• Working Temperature: 0 to 60° C
APAX-5202P User Manual 4
1.4 Supported Software
1.4.1 Programming Library
For customers who are writing their own programs, we provide
VB/VC++ programming libraries and Windows 2000/XP DLL for
APAX-5202P. These function libraries are shipped with the board. There
is also support for Windows 2000/XP, and Embedded XP.
1.4.2 Advantech AMONet Device Manager
Advantech AMONet Device Manager is a utility software tool for AMO-
Net. It is usually used offline to test and debug the communication status,
I/O slave module operation and motion slave operation.
1.5 Application Development
Figure 1.3: Application Development
Advantech also provides Motion Slave Module such as AMAX-2240
series and AMAX-2750 series. If you want to get more information about
them, please refer to the Advantech website.
Inhaltsverzeichnis
Andere Advantech Steuereinheit Handbücher
Advantech
Advantech EPD-132 Bedienungsanleitung
Advantech
Advantech ROM-7510 Bedienungsanleitung
Advantech
Advantech ADAM-5000 Series Bedienungsanleitung
Advantech
Advantech MIO-6250 MIO/160 Installations- und Betriebshandbuch
Advantech
Advantech PCM-3665 PC/104-Plus Installations- und Betriebshandbuch
Advantech
Advantech IPMI-1000 Installations- und Betriebshandbuch
Advantech
Advantech PCM-3614 Bedienungsanleitung
Advantech
Advantech MIC-75G30 Installations- und Betriebshandbuch
Advantech
Advantech Network Device USB-4761 Installations- und Betriebshandbuch
Advantech
Advantech RISC Module SOM-A2552 Bedienungsanleitung
Advantech
Advantech MIC-3376 Bedienungsanleitung
Advantech
Advantech WISE-4671 Installations- und Betriebshandbuch
Advantech
Advantech AIW-357 DK-G1P Bedienungsanleitung
Advantech
Advantech SOM-5894 Bedienungsanleitung
Advantech
Advantech PCM-3345 Bedienungsanleitung
Advantech
Advantech MIC-75G20-10B1 Installations- und Betriebshandbuch
Advantech
Advantech VEGA-330 Installations- und Betriebshandbuch
Advantech
Advantech ADAM-3750 3-Wire Series Installations- und Betriebshandbuch
Advantech
Advantech MIC-75M40 Installations- und Betriebshandbuch
Advantech
Advantech Network Device USB-4761 Installations- und Betriebshandbuch
Beliebte Steuereinheit Handbücher anderer Marken
Festo
Festo Compact Performance CP-FB6-E Stücklistenhandbuch
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung
JS Automation
JS Automation MPC3034A Bedienungsanleitung
JAUDT
JAUDT SW GII 6406 Series Kurzanleitung
Spektrum
Spektrum Air Module System Bedienungsanleitung
BOC Edwards
BOC Edwards Q Series Bedienungsanleitung
