Advantech Network Device USB-4761 Installations- und Betriebshandbuch

1 Startup Manual

Packing List

Before installation, please make sure that you have received

the following:

• USB-4761 Module with DIN-rail mounting kit

• Shielded USB 2.0 Cable (1.8 m)

• Companion DVD (DLL driver included)

• Startup Manual

If anything is missing or damaged, contact your distributor or

sales representative immediately.

User Manual

For more detailed information on this product, please refer to

the USB-4761 User Manual on the DVD (PDF format). CD:\

Documents\Hardware Manuals\USB\USB-4761

Specications

Declaration of Conformity

FCC Class A

This equipment has been tested and found to comply with

the limits for a Class A digital device, pursuant to part 15

of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the

equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential

area is likely to cause interference in which case the user is

required to correct interference at his own expense.

This product has passed the CE test for environmental

specifications when shielded cables are used for external

wiring. We recommend the use of shielded cables. This kind

of cable is available from Advantech. Please contact your

local supplier for ordering information.

Notes

For more information on this and other Advantech products,

please visit our websites at:

http://www.advantech.com

For technical support and service:

http://www.advantech.com/support/

This startup manual is for USB-4761.

Part No: 2003476112 3rd Edition

February 2016

STARTUP MANUAL

Overview

USB-4761

8-ch Relay, 8-ch IDI USB Module

The Advantech USB-4761 is a powerful data acquisition

(DAS) module for the USB port. It features a unique circuit

design and complete functions for data acquisition and

control.

Isolated Digital Input

Number of Input Channels 8

Optical Isolation 2500 VDC

Optical Isolator response time 50 us

Input Voltage VIH(max.) = 30 VDC

VIH(min.) = 5 VDC

VIL(max.) = 2 VDC

Input Current 1.2 mA @ 5 VDC

3.3 mA @12 VDC

6.9 mA @24 VDC

8.7 mA @30 VDC

Relay Output

Channels 8

Rating (Resistive) 30 VDC @ 1A

110 VAC @0.3A

120 VAC @0.5A

240 VAC @0.25A

Max. Switching Power 62.5VA , 60W

Max. Switching Voltage 250 VAC , 220VDC

Max. Switching Current 5 A

Breakdown Voltage 1500V

Operation time 5 ms max

Release time 4 ms max

Life Expectancy Mechanical 1x108operations (typical)

Electrical 12V @ 10mA : 5X107

operations (typical)

30V @ 2000mA : 2X105

operations (typical)

General Specications

I/O Connector Type 10-pin screw terminal*5

Dimensions 132 x 80 x 32 mm

(5.2” x 3.2” x 1.3”)

Power Consumption Typical : 5V @60 mA

Max: 5V @400 mA

Temperature Operating: 0 ~ +60°C

(32 ~ 140°F)

Storage: -20 ~ +70°C

(-4 ~ 158°F)

Relative Humidity 5 – 95°% RH non-condens-

ing (refer to IEC 68-2-3)

Startup Manual 2

STARTUP MANUAL

Hardware Installation

Pin Assignments

1. Touch the metal part on the surface of your computer

to neutralize the static electricity that might be in your

body.

2. Plug your USB module into the selected USB port.

Hold the module only by its edges. Plug the module

firmly into place. Use of excessive force must be

avoided; otherwise the module might get damaged.

Signal

Name Description

NO<0~7> Normally open pin of relay output

COM<0~7> Common pin of relay output

NC<0~7> Normally close pin of relay output

IDInA <n=0~7> Isolated digital input A

IDInB <n=0~7> Isolated digital input B

Isolated Digital I/O Connections

LED Denitions

The USB Module is equipped with an LED indicator to

show the current status of the device. When you plug the

USB device into the USB port, the LED indicator will blink

five times and then stay lit to indicate that it is on. Please

refer to the following table for detailed LED indicator status

information

LED Status Description

ON Device ready to work

OFF Device not ready to work

Slow blinking (5 times) Device initializing

Fast Blinking Device working

Single-ended Channel Connections

USB-4761 has 8 isolated digital input channels. Each of

isolated digital input channel accepts 5~30 VDC voltage in-

puts, and accept bi-directional input. It means that you can

apply positive or negative voltage to an isolated input pin

(Vin ). The figure below shows how to connect an external

input source to one of the card's isolated input channels.

Relay Connections

After power on, the initial relay output status is shown as

below:

Andere Handbücher für Network Device USB-4761

Inhaltsverzeichnis

Andere Advantech Steuereinheit Handbücher

Advantech

Advantech ADAM-2510Z Bedienungsanleitung

Advantech

Advantech SOM-4466 Bedienungsanleitung

Advantech

Advantech MIO-3121 Installations- und Betriebshandbuch

Advantech

Advantech iDAQ-817 Bedienungsanleitung

Advantech

Advantech WISE-2211 Installations- und Betriebshandbuch

Advantech

Advantech Network Device USB-4761 Installations- und Betriebshandbuch

Advantech

Advantech PCM-3526 Installations- und Betriebshandbuch

Advantech

Advantech IPMI-1000 Installations- und Betriebshandbuch

Advantech

Advantech ADAM-3016 Bedienungsanleitung

Advantech

Advantech PCM-3110 Bedienungsanleitung

Advantech

Advantech USB-4716 Installations- und Betriebshandbuch

Advantech

Advantech IPMI-2000 Installations- und Betriebshandbuch

Advantech

Advantech PCM-261 Installations- und Betriebshandbuch

Advantech

Advantech SOM-5894 Bedienungsanleitung

Advantech

Advantech WISE-1540 Bedienungsanleitung

Advantech

Advantech ADAM-5000 Series Bedienungsanleitung

Advantech

Advantech USB-4716 Bedienungsanleitung

Advantech

Advantech ADAM-5240 Bedienungsanleitung

Advantech

Advantech PCM-3910 Installations- und Betriebshandbuch

Advantech

Advantech ADAM-3656 Installations- und Betriebshandbuch

Advantech

Advantech SOM-5780 Leitfaden

Advantech

Advantech MOS-1130Y-0201E Bedienungsanleitung

Advantech

Advantech PCM-23C1CF Bedienungsanleitung

Advantech

Advantech PCM-233A Installations- und Betriebshandbuch

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung