Advantech ADAM-3013 Bedienungsanleitung

Introduction

ADAM-3013 is a DIN-rail mounted, RTD input signal conditioning module

with 1000VDC 3-way isolation between input, output and power. The

switch configurable input and output offers flexible ,wide raging capability

for Platinum and Nickel RTDS. The input of the ADAM-3013 RTD input

can be configured for any one of up to fourteen defined temperature ranges

(see “Input Range” under “Specification” below) and two OEM-defined

ranges. The output is linearized to the RTD temperature input and can be set

for either 0~5V, 0~10V or 0~2 m A.

The ADAM-3013 is equipped with a dual function LED signal monitor. The

front mounted LED indicates both line power and conversion status.

Conversion operation is indicated by a flashed LED.If the LED is off, please

check that the power connection and wiring connections are correct.

3-way isolation completely eliminates ground loops from any

source.Isolation protects expensive SCADA systems from ground faults and

significantly reduces the effect of high common mode voltage which are

prevalent in many RTD applications.

The ADAM-3013 can be mounted on a DIN-rail and features daisy chain

power wiring to connect easily from adjacent ADAM-3000 series modules

in a compact space.Also,the ADAM-3013 modules uses single +24 VDC

with very low power consumption and can be operate in environments with

high humidity and wide temperature variation.

Features

• Switch configurable input ranges for Platinum and Nickel RTDs.

• Switch configurable linearized output ranges (V and m A).

• 1000 VDC 3-way isolation

• Flexible DIN-rail mounting

• Power/Signal status LED indicator

• Operates from a single of 24 VDC

• Operating temperature range: 0~70°C.

Specifications

• Input range

PT100(a=.00385) –100~100°C. PT100(a=.00392) –100~100°C.

PT100(a=.00385) 0~100°C PT100(a=.00392) 0~100°C

PT100(a=.00385) 0~200°C PT100(a=.00392) 0~200°C

PT100(a=.00385) 0~600°C PT100(a=.00392) 0~600°C

PT100(a=.00385) –100~0°C NI120 0~100°C

PT100(a=.00385) –100~200°C NI120 –80~100°C

PT100(a=.00385) –50~50°C PT100(a=.00385) OEM defiened

PT100(a=.00385) –50~150°C PT100(a=.00392) OEM defiened.

Input Connections

• Input Connections: 2,3 or 4 wires

• Input range: 0~5V, 0~10V,0~20m A

• Accurancy: +/- 0.1% of full range (voltage) or

• +/- 0.15°C (voltage)

+/- 0.2% of full range (current)

• Temperature drift: +/- 30 ppm of full range

• Input CMR at DC: 92dB minimum

• Isolation: 1000 VDC.

• Supply voltage: 24 Vdc +/- 10%

• Operating temperature range: 0~70°C

• Bandwidth: 4Hz

• Power consumption: <0.95W

Ordering Information

• ADAM-3013 : Isolated RTD Input Module

Configuration

Please refer to the following pages on the Adam-3013 configuration.

Figure 1 shows the RTD Wiring of ADAM-3013. Figure 2 shows the

terminal wiring of ADAM-3013.Positive terminals 9 and 7 are internally

connected, as are negative terminals 12 and 10.Power can be connected

through the adjacent modules, making wiring much easier.ADAM-3013

uses single 24 VDC. Table 1 shows the switch setting to configure the

RTD input type and range.To reach the switches,you need to remove the

DIN-rail bracket by sliding it down.

Inhaltsverzeichnis

Andere Advantech E/A-System Handbücher

Advantech

Advantech ADAM-6100EI Series Bedienungsanleitung

Advantech

Advantech PCL-733 Bedienungsanleitung

Advantech

Advantech PCIE-1762H Bedienungsanleitung

Advantech

Advantech PCM-27J3AU Installations- und Betriebshandbuch

Advantech

Advantech PCL-720 Bedienungsanleitung

Advantech

Advantech MIOe-220 Installations- und Betriebshandbuch

Advantech

Advantech 98910770500 Installations- und Betriebshandbuch

Advantech

Advantech PCIE-1756H Bedienungsanleitung

Advantech

Advantech AMAX-5000 Series Bedienungsanleitung

Advantech

Advantech ADAM-6156PN Bedienungsanleitung

Advantech

Advantech UNO-2000-LKAE Bedienungsanleitung

Advantech

Advantech USB-582 Installations- und Betriebshandbuch

Advantech

Advantech USB-4716 Bedienungsanleitung

Advantech

Advantech WISE-2200-M Installations- und Betriebshandbuch

Advantech

Advantech WISE-4610 Series Bedienungsanleitung

Advantech

Advantech ECU-P1702 Installations- und Betriebshandbuch

Advantech

Advantech 48/24-Channel Digital Input/Output USB Module... Bedienungsanleitung

Advantech

Advantech AIIS-1750 Installations- und Betriebshandbuch

Advantech

Advantech USB-5820 Bedienungsanleitung

Advantech

Advantech APAX-5013 Bedienungsanleitung

Advantech

Advantech PCI-1750SO Bedienungsanleitung

Advantech

Advantech PCI-1730 Bedienungsanleitung

Advantech

Advantech WISE-4060 Installations- und Betriebshandbuch

Advantech

Advantech APAX-5000 Series Bedienungsanleitung

Beliebte E/A-System Handbücher anderer Marken

WAGO

WAGO 750-344 Bedienungsanleitung

Teknim

Teknim TWM-1887 Bedienungsanleitung

Intelligent Appliance

Intelligent Appliance IA-2662-E Bedienungsanleitung

BERGHOF

BERGHOF ECC DIO 16/16 Bedienungsanleitung

Festo

Festo CP-E08-M12-CL Bedienungsanleitung

Measurement Computing

Measurement Computing PCI-DAS64/M1/16 Bedienungsanleitung

Hitachi

Hitachi HX-RIO3 Series Bedienungsanleitung

NUUO

NUUO SCB-A08 Bedienungsanleitung

M-system

M-system R3Y-RS8 Bedienungsanleitung

jablotron

jablotron JB-110N Bedienungsanleitung

Omron

Omron SYSMAC C200H Bedienungsanleitung

DOLD

DOLD SAFEMASTER M Bedienungsanleitung

ABB

ABB OPT-MF-001 Bedienungsanleitung

Omron

Omron SYSMAC C2000H Bedienungsanleitung

Helmholz

Helmholz TB20 Bedienungsanleitung

ICP DAS USA

ICP DAS USA tM-AD2 Bedienungsanleitung

Automationdirect.com

Automationdirect.com DL305 Bedienungsanleitung

WAGO

WAGO I/O-SYSTEM 750 Bedienungsanleitung