Advantech ADAM-6000 series Bedienungsanleitung

User's Manual

Ethernet-based Data Acquisition and Control Modules

Evolved for the eWorld

Select Your Hardware Component

Hardware Installation Guide

I/O Module introduction

System Configuration Guide

Plan Your Application Program

First Edition

This document is copyrighted, 2002, by Advantech Co., Ltd.All rights are

reserved. Advantech Co., Ltd., reserves the right to make improvements to the

products described in this manual at any time without notice.

No part of this manual may be reproduced, copied, translated or transmitted in any

form or by any means without the prior written permission of Advantech Co., Ltd.

Information provided in this manual is intended to be accurate and reliable.

However,Advantech Co., Ltd. assumes no responsibility for its use, nor for any

infringements upon the rights of third parties which may result from its use.

Acknowledgments

IBM and PC are trademarks of International Business Machines Corporation.

Part No. 2001600000 First Edition

Printed in Taiwan Mar. 2002

Product Warranty

Advantech warrants to you, the original purchaser, that each of its products will be

free from defects in materials and workmanship for two year from the date of

purchase.

This warranty does not apply to any product which have been repaired or altered by

other than repair personnel authorized by Advantech, or which have been subject to

misuse, abuse, accident or improper installation. Advantech assumes no liability as a

consequence of such events under the terms of this Warranty.

Because of Advantech’s high quality-control standards and rigorous testing, most of

our customers never need to use our repair service. If anAdvantech product ever does

prove defective, it will be repaired or replaced at no charge during the warranty period.

For out-of-warranty repairs, you will be billed according to the cost of replacement

materials, service time and freight. Please consult your dealer for more details.

If you think you have a defective product, follow these steps:

1. Collect all the information about the problem encountered (e.g. type of PC, CPU

speed, Advantech products used, other hardware and software used etc.). Note

anything abnormal and list any on-screen messages you get when the problem

occurs.

2. Call your dealer and describe the problem. Please have your manual, product, and

any helpful information readily available.

3. If your product is diagnosed as defective, you have to request an RAM number.

When requesting an RMA (Return Material Authorization) number, please access

ADVANTECH's RMA web site: http://www.advantech.com.tw/rma. If the web

sever is shut down, please contact our office directly. You should fill in the

"Problem Repair Form", describing in detail the application environment,

configuration, and problems encountered. Note that error descriptions such as

"does not work" and "failure" are so general that we are then required to apply our

internal standard repair process.

4. Carefully pack the defective product, a completely filled-out Repair and

Replacement Order Card and a photocopy of dated proof of purchase (such as your

sales receipt) in a shippable container. A product returned without dated proof of

purchase is not eligible for warranty service.

5. Write the RMAnumber visibly on the outside of the package and ship it prepaid to

your dealer.

Technical Support

We want you to get the maximum performance from your products. So if you run into

technical difficulties, we are here to help. For most frequently asked questions you

can easily find answers in your product documentation. Moreover, there are a huge

database about trouble-shooting and knowledge Base as technical reference on our

website. These answers are normally a lot more detailed than the ones we can give

over the phone.

So please consult this manual or the web site first. If you still cannot find the answer,

gather all the information or questions that apply to your problem and, with the

product close at hand, call your dealer. Our dealers are well trained and ready to give

you the support you need to get the most from your Advantech products. In fact, most

problems reported are minor and are able to be easily solved over the phone.

In addition, free technical support is available from Advantech engineers every

business day. We are always ready to give advice on application requirements or

specific information on the installation and operation of any of our products.

Website information:

You can access the most current support on our website:

http://www.advantech.com

Then click the title of “Service & Support” for further product information.

Manual Organization

This Manual has six chapters, three appendices.

The following table lists each chapter or appendices with its corresponding title and a brief overview of the topics covered in it.

Chapter /

Appendix Title Topics Covered

1 Understanding Your System

Introduces the suitable applying industries and the position

in an Ethernet remote system. Summarize the features and

the common specification of ADAM-6000. Explains the

functions of the LED indicators.

2 Selecting Your Hardware

Provides a briefly selection chart and specification table of

ADAM-6000 I/O modules for users to organize their

system easily. Give a direction to calculate system capacity

and select a certain power supply. Recommend a standard

for communication cable and connector.

3 Hardware Installation Guide

Lists the necessary components and proper environment in

installing process. Describes the Hardware dimension and

the way to place or mount it. Explains the rule of mapping

I/O address. Describes the wiring and connecting detail for

ADAM-6000.

4 I/O Module Introduction Introduces the detail specifications, functions and

application wiring of each ADAM-6000 I/O modules.

5 System Configuration Guide Guides users to use Windows Utility for network &

security setting, I/O range configuration, accuracy

calibration, command setting, and so on.

6 Planning Your Application Program

Demonstrate the standard web page operation and the

customization web page development. Introduces the

functions and structure of DLL drivers and command sets.

Explain how to integrate these programming tools to plan

your application program.

A Design Worksheets Provides organized worksheets for users to establish

system configuration document in order.

B Data Formats and I/O Range Provides detail information about Data formats and I/O

Range of Analog Module.

C Grounding Reference Explains the concepts about field grounding and shielding.

How to use this manual

The following flow chart demonstrates a thought process that you can use when you

plan your ADAM-6000 Ethernet Data Acquisition and Control System.

Chapter 1

Understanding Your System

UsingthisChapter

If you want to read about Go to page

Introduction 1-2

Major Feature 1-3

Technical Specification 1-5

LED Status of ADAM-6000 I/O Modules 1-7

1-1 Introduction

ADAM-6000, Ethernet-based data acquisition and control module, provides I/O, data

acquisition and networking in one module to build a cost-effective, distributed

monitoring, and control solutions for a wide variety of industries and applications.

Through de-factor standard Ethernet networking, ADAM-6000 retrieves I/O values

from sensors and publishes these real-time I/O value to networking nodes at local area

network or Intranet, Internet. With Ethernet-enabled technology, ADAM-6000 series

modules build up a cost-effective DA&C system for Building Automation,

environmental monitoring, facility management and eManufacturing applications.

Please refer to Figure 1-1 to have a brief view of ADAM-6000 system architecture.

Figure1-1ADAM-6000 System Architecture

1-2 Major Features

1-2-1 Ethernet-enabled DA&C I/O Modules

ADAM-6000 is based on the popular Ethernet networking standards used today in most business

environments. Users can easily add ADAM-6000 I/O modules to existing Ethernet networks or use

ADAM-6000 modules in new Ethernet-enabled eManufacturing networks. ADAM-6000 module features

a 10/100 Mbps Ethernet chip and supports industrial popular Modus/TCP protocol over TCP/IP for data

connection.ADAM-6000 also supports UDP protocol over Ethernet networking. With UDP/IP,

ADAM-6000 I/O modules can actively send I/O data stream to 8 Ethernet nodes. Through Ethernet

networking HMI/SCADAsystem and controller can access or gather real-time data fromADAM-6000

Ethernet enabled DA&C modules.And, these real-time data can be integrated with business system to

create valuable, competitive business information immediately.

1-2-2 Intelligent I/O Modules

Enhancing from traditional I/O modules,ADAM-6000 I/O modules have pre-built intelligent mathematic

functions to empower the system capacity. The Digital Input modules provide Counter, Totalizer

functions; the Digital Output modules provide pulse output, delay output functions; the Analog Input

modules provide the Max./Min./Average data calculation; theAnalog Output modules provide the PID

loop control function.

1-2-3 Mixed I/O in One Module to fit all application’s

ADAM-6000 mixed I/O module design concept provides the most cost-effective I/O usage for application

system. The most common used I/O type for single function unit are collected in ONE module. This

design concept not only save I/O usage and spare modules cost but also speed up I/O relative

operations. For small DA&C system or standalone control unit in a middle or large scale,ADAM-6000

mixed I/O design can easily fit application needs by one or two modules only. With additional embedded

control modules, ADAM-6000 can easily create a localized, less complex, and more distributed I/O

architecture.

1-2-4 Embedded web built web page for remote monitoring and diagnose

Each ADAM-6000 module features a pre-built I/O module web page to display real-time I/O data value,

alarm and module status thru LAN or Internet. Just Internet browser, users can easily monitor real-time

I/O data value and alarm no matter local site or remote site. Then, the web-enabled monitoring system

is completed immediately without any programming effort.

1-2-5 Industrial standard Modbus/TCP protocol supported for open connectivity

ADAM-6000 modules support the popular industrial standard, Modbus/TCP protocol, to connect with

Ethernet Controller or HMI/SCADA software built with Modbus/TCP driver.Advantech also provides

OPC server for Modbus/TCP to integrate ADAM-6000 I/O real-time data value with OPC client enabled

software. Users don’t need to take care of special drivers development.

1-2-6 Customization Web Page

Since ADAM-6000 modules built in a default web page, users has allowed to monitor and control the I/O

status in anywhere through Internet Explorer Browser. Move over, the ADAM-6000 modules could be

downloaded the user-defined web page for individual applications.Advantech has provided sample

programs of JAVAScript for users’ reference to design their own operator interface, then download it into

the specific ADAM-6000 modules via Windows Utility.

1-2-7 Software Support

Based on the Modbus/TCP standard, the ADAM-6000 firmware is a built-in Modbus/TCP server.

Therefore, Advantech provides the necessary DLL drivers, OPC Server, and Windows Utility for users

for client data for theADAM-6000P. Users can configure this DA&C system via Windows Utility;

integrate with HMI software package via Modbus/TCP driver or Modbus/TCP OPC Server. Even more,

you can use the DLL driver andActiveX to develop your own applications.

Andere Handbücher für ADAM-6000 series

Inhaltsverzeichnis

Andere Advantech E/A-System Handbücher

Advantech

Advantech USB-582 Installations- und Betriebshandbuch

Advantech

Advantech UNO-2000-LKAE Bedienungsanleitung

Advantech

Advantech ADAM-6251 Installations- und Betriebshandbuch

Advantech

Advantech USB-5820 Bedienungsanleitung

Advantech

Advantech PCIE-1762H Bedienungsanleitung

Advantech

Advantech WISE-4610 Series Bedienungsanleitung

Advantech

Advantech WISE-4060 Installations- und Betriebshandbuch

Advantech

Advantech WISE-4210 Series Bedienungsanleitung

Advantech

Advantech PCI-1727U Bedienungsanleitung

Advantech

Advantech USB-5817 Installations- und Betriebshandbuch

Advantech

Advantech WISE-4210 Series Installations- und Betriebshandbuch

Advantech

Advantech PCI-1758UDIO Installations- und Betriebshandbuch

Advantech

Advantech AMAX-5000 Series Bedienungsanleitung

Advantech

Advantech ECU-P1702 Installations- und Betriebshandbuch

Advantech

Advantech APAX-5000 Series Bedienungsanleitung

Advantech

Advantech AMAX-5000 Series Bedienungsanleitung

Advantech

Advantech AMAX-5000 Series Bedienungsanleitung

Advantech

Advantech PCM-3730 Bedienungsanleitung

Advantech

Advantech ADAM-6100PN Series Bedienungsanleitung

Advantech

Advantech ADAM-6100EI Series Bedienungsanleitung

Advantech

Advantech PCI-1730 Bedienungsanleitung

Advantech

Advantech MIC-75G20 Installations- und Betriebshandbuch

Advantech

Advantech PCL-813 Bedienungsanleitung

Advantech

Advantech WISE-2200-M Installations- und Betriebshandbuch

Beliebte E/A-System Handbücher anderer Marken

WAGO

WAGO 750-344 Bedienungsanleitung

Teknim

Teknim TWM-1887 Bedienungsanleitung

Intelligent Appliance

Intelligent Appliance IA-2662-E Bedienungsanleitung

BERGHOF

BERGHOF ECC DIO 16/16 Bedienungsanleitung

Festo

Festo CP-E08-M12-CL Bedienungsanleitung

Measurement Computing

Measurement Computing PCI-DAS64/M1/16 Bedienungsanleitung

Hitachi

Hitachi HX-RIO3 Series Bedienungsanleitung

NUUO

NUUO SCB-A08 Bedienungsanleitung

M-system

M-system R3Y-RS8 Bedienungsanleitung

jablotron

jablotron JB-110N Bedienungsanleitung

Omron

Omron SYSMAC C200H Bedienungsanleitung

DOLD

DOLD SAFEMASTER M Bedienungsanleitung

ABB

ABB OPT-MF-001 Bedienungsanleitung

Omron

Omron SYSMAC C2000H Bedienungsanleitung

Helmholz

Helmholz TB20 Bedienungsanleitung

ICP DAS USA

ICP DAS USA tM-AD2 Bedienungsanleitung

Automationdirect.com

Automationdirect.com DL305 Bedienungsanleitung

WAGO

WAGO I/O-SYSTEM 750 Bedienungsanleitung