Advantech ADAM-6251 Installations- und Betriebshandbuch

STARTUP MANUAL

1 Startup Manual

ADAM-6251

16-ch Digital Input Modbus TCP Module

Notes

For more information on this and other Advantech

products, please visit our websites at:

http://www.advantech.com

http://www.advantech.com/eAutomation

For technical support and service:

http://www.advantech.com.tw/eservice

This startup manual is for the ADAM-6251

Part No: 2003625100 1st Edition

February 2013

Switch Settings

It mainly presents the switch conguration for Dry Contact

and Wet Contact wiring in Digital Input interface.

Switch SW1 SW2

Position 12341234

DI Channel Ch3 Ch2 Ch1 Ch0 Ch7 Ch6 Ch5 Ch4

Switch SW3 SW4

Position 12341234

DI Channel Ch11 Ch10 Ch9 Ch8 Ch15 Ch14 Ch13 Ch12

ON Dry Contact (Default)

OFF Wet Contact

Overview

Thank you for purchasing this ADAM-6200 series

module.This is a quick guide to help you deploy the

ADAM-6200 series module in your application eld. It

will include power and application wiring. If you need a

more complicated or specic installation, you could try

to contact ADVANTECH for advanced technical support

or suggestions.

Input Power Requirements

The ADAM-6200 system is designed for a standard

industrial unregulated 24 VDC power supply. For further

applications, it can also accept +10 to +30 VDC of power

input, 200mV peak to peak of power ripple, and the

immediate ripple voltage should be maintained between

+10 and +30 VDC.

Application Wiring

Isolated Digital Input

Dry Contact

Wet Contact

STARTUP MANUAL

Startup Manual 2

Daisy Chain Limitations

Here are the limitations of daisy chain connection with

auto-bypass protection enabled.

Read the following statement carefully before

installation.

In general, the maximum cabling distance of each

100BASE-TX network segment is 100 meter. Based

on this limitation, the maximum total connection length

in daisy chain wiring should also be 100m as if auto-

bypass protection active. See the following gure as

example, the distance from rst to second module is

50m, so as second to third. When the power fails on

second (middle) module, the auto-bypass will activate to

bridge the network connection. The total distance from

rst to the 3rd will become 100m, that means the total

network segment is close to limitation.

Furthermore, for the reason of signal transmission

characteristics, the continuous auto-bypass node should

be less than 2, so that the network communication in

daisy chain wiring is workable.

The purpose of the auto-bypass protection is to help user

minimize the damage situation of module power outage.

Note that when a power outage occurs on ADAM-

6200 modules, there exists around 2.5 seconds buffer

time for internally switching to auto-pass circuit.That

means Ethernet packets can’t reach the other devices

by daisy-chaining after this power-down module in

around 2.5 seconds.The valid connection duration after

the auto-bypass function is enabled is at most around

4 days, otherwise, the Ethernet communication will be

interrupted until power is restored.

STARTUP MANUAL

Andere Advantech E/A-System Handbücher

Advantech

Advantech PCI-1713 Bedienungsanleitung

Advantech

Advantech USB-582 Installations- und Betriebshandbuch

Advantech

Advantech USB-4751 Bedienungsanleitung

Advantech

Advantech WISE-4210 Series Bedienungsanleitung

Advantech

Advantech WISE-4610 Series Bedienungsanleitung

Advantech

Advantech ECU-P1702 Installations- und Betriebshandbuch

Advantech

Advantech UNO-2000-LKAE Bedienungsanleitung

Advantech

Advantech USB-5817 Installations- und Betriebshandbuch

Advantech

Advantech WISE-4610 Series Bedienungsanleitung

Advantech

Advantech WISE-2200-M Installations- und Betriebshandbuch

Advantech

Advantech I/O Module 5000 Series Bedienungsanleitung

Advantech

Advantech PCI-1758UDIO Installations- und Betriebshandbuch

Advantech

Advantech WISE-5000 Series Bedienungsanleitung

Advantech

Advantech PCI-1727U Bedienungsanleitung

Advantech

Advantech B+B SmartWorx Zlinx ZZ24D-NA-SR Bedienungsanleitung

Advantech

Advantech AMAX-5000 Series Bedienungsanleitung

Advantech

Advantech PCM-27J3AU Installations- und Betriebshandbuch

Advantech

Advantech PCI-1730 Bedienungsanleitung

Advantech

Advantech AIIS-E730 Installations- und Betriebshandbuch

Advantech

Advantech ADAM-3600-A1F Bedienungsanleitung

Advantech

Advantech ADAM-6156PN Bedienungsanleitung

Advantech

Advantech AMAX-5000 Series Bedienungsanleitung

Advantech

Advantech PCIE-1762H Bedienungsanleitung

Advantech

Advantech WISE-4000 Series Bedienungsanleitung

Beliebte E/A-System Handbücher anderer Marken

WAGO

WAGO 750-344 Bedienungsanleitung

Teknim

Teknim TWM-1887 Bedienungsanleitung

Intelligent Appliance

Intelligent Appliance IA-2662-E Bedienungsanleitung

BERGHOF

BERGHOF ECC DIO 16/16 Bedienungsanleitung

Festo

Festo CP-E08-M12-CL Bedienungsanleitung

Measurement Computing

Measurement Computing PCI-DAS64/M1/16 Bedienungsanleitung

Hitachi

Hitachi HX-RIO3 Series Bedienungsanleitung

NUUO

NUUO SCB-A08 Bedienungsanleitung

M-system

M-system R3Y-RS8 Bedienungsanleitung

jablotron

jablotron JB-110N Bedienungsanleitung

Omron

Omron SYSMAC C200H Bedienungsanleitung

DOLD

DOLD SAFEMASTER M Bedienungsanleitung

ABB

ABB OPT-MF-001 Bedienungsanleitung

Omron

Omron SYSMAC C2000H Bedienungsanleitung

Helmholz

Helmholz TB20 Bedienungsanleitung

ICP DAS USA

ICP DAS USA tM-AD2 Bedienungsanleitung

Automationdirect.com

Automationdirect.com DL305 Bedienungsanleitung

WAGO

WAGO I/O-SYSTEM 750 Bedienungsanleitung