Advantech B+B SmartWorx 232USB9M Bedienungsanleitung

Product Overview

Warning: To prevent installation

errors, do not plug in the hardware

until you have already installed the

drivers.

Use the included CD to install

the converter’s drivers.

Connect the Converter

Connect the converter’s USB port

to a USB port on your computer or

USB hub.

When the installation is complete the

converter will appear in Windows

Device Manager as an additional COM

port.

Most of the time a DB9 male will

be a DTE. A DB9 female will

usually be a DCE.

A DTE device is “Data Terminal

Equipment.” This includes computers,

PLCs, and most devices that are not

used to extend communications.

(Think “COMPUTER” for DTE.)

A DCE device is “Data Communications

Equipment.” This includes modems and

other devices that extend communica-

tions, like RS-422, RS-485, ﬁber optic

converters or radio modems.

(Think “MODEM” for DCE.)

If both devices have a DB9 male

you will need a crossover cable.

If both devices are DB9 female

you will need a crossover cable.

When one device is female and

one device is male, use a

straight-through cable.

RS-232 Pinout (DB9 Male DTE)

PIN Signal Name RS-232

SIgnals

1DCD (Data Carrier Detect) Input

2RD (Receive Data) Input

3TD (Transmit Data) Output

4DTR (DTE Ready) Output

5SG (Signal Ground) Ground

6DSR (DCE Ready) Input

7RTS (Request to Send) Output

8CTS (Clear to Send) Input

9RI (Ring Indicator) Input

Loopback pins 2 and 3. Using Hyper

Terminal or similar program, connect

to the COM port. Set the desired baud

rate. Ensure that Hyper Terminal local

echo is OFF. Transmit data. If the same

character string is returned, the test is good.

Install the Drivers

Loopback Test

USB

Connector

Serial

Connector

QUICK START

GUIDE

+ 232USB9M/232USB9M-LS

+ USB Cable

+ CD-ROM with Drivers

Recommended Accessories

9PAMF6

6ft DB9 to DB9 Cable

Male to Female

USBAMBM-6F

6ft USB Cable

Document number – 710-10879-00_232USB9M-xx_3216qsg

1-888-948-2248 | Europe: +353 91 792444

www.advantech-bb.com

707 Dayton Road | PO Box 1040 | Ottawa, IL 61350

Phone: 815-433-5100 | Fax: 815-433-5109

www.advantech-bb.com | E-mail: support@advantech-bb.com

Troubleshooting

Before you begin, be sure you have

the following:

232USB9M/232USB9M-LS

USB to RS-232

Mini Converter

Fast and easy on the web:

www.advantech-bb.com

One USB port is required for each installed

device. The USB port can be native to the PC or it

can be a USB port on a USB hub that is

connected to a PC.

The device works with USB 1.1 or 2.0 ports. But it

has a maximum USB data rate of 12 Mbps.

To verify the installation you may open the

Windows Device Manager Scroll down to Ports.

Expand the ﬂyout window. You should see the

new ports. If there are no exclamation points or

other trouble indicators ports are installed

correctly and ready for use.

Are My Devices Wired As DTE or DCE?

(How to Check)

1. Use Rule of Thumb

If the device plugs into the computer serial

port and works normally, the device is wired

as DCE (or the connection cable is a crossover

type that makes it work as a DCE). If the device

connects to the computer port using a “null

modem” crossover cable, it is wired as DTE.

2. Use RS-232 Line Tester

A quick and easy way to determine the DTE/DCE port

type is to use a RS-232 line tester

such as the 9PMTT. The tester can show the signal state

of any active RS-232 data lines using LEDs lighting Red

or Green. Active data lines are

output from a device. They may be either

High or Low.

Dieses Handbuch passt für folgende Modelle

Andere Advantech Medienkonverter Handbücher

Advantech

Advantech ADAM-4542+ Installations- und Betriebshandbuch

Advantech

Advantech VEGA-2002-3GS Bedienungsanleitung

Advantech

Advantech B+B SmartWorx MiniMc TP-TX/FX Bedienungsanleitung

Advantech

Advantech IE-Giga-MiniMc Bedienungsanleitung

Advantech

Advantech B+B SmartWorx Giga-MiniMc TX-SX Bedienungsanleitung

Advantech

Advantech B+B SMARTWORX 485LDRC9 Bedienungsanleitung

Advantech

Advantech EKI-2541M/SC Bedienungsanleitung

Advantech

Advantech DVP-7020 Bedienungsanleitung

Advantech

Advantech EKI-2741F Bedienungsanleitung

Advantech

Advantech EKI-2741SX Bedienungsanleitung

Advantech

Advantech USB-4600 Series Bedienungsanleitung

Advantech

Advantech ADAM-4561 Bedienungsanleitung

Advantech

Advantech PCL-833 Bedienungsanleitung

Advantech

Advantech ADAM-6541 Bedienungsanleitung

Advantech

Advantech BB-SCP211-DFTB3 Bedienungsanleitung

Advantech

Advantech B+B SmartWorx 485OI9TB Bedienungsanleitung

Advantech

Advantech ADAM-6542 Bedienungsanleitung

Advantech

Advantech USB-4604B Bedienungsanleitung

Advantech

Advantech B+B SmartWorx 485USB9F-2W Bedienungsanleitung

Advantech

Advantech BB-USO9ML2-A Bedienungsanleitung

Advantech

Advantech IMC-574I-SFP Bedienungsanleitung

Advantech

Advantech B+B SmartWorx 485USBTB-2W Bedienungsanleitung

Advantech

Advantech PCIE-1884 Bedienungsanleitung

Advantech

Advantech BB-USR604 Bedienungsanleitung

Beliebte Medienkonverter Handbücher anderer Marken

SoundTraxx

SoundTraxx Blunami BLU-2200 Bedienungsanleitung

SPROLINK

SPROLINK VA1 Bedienungsanleitung

Acclaim Lighting

Acclaim Lighting DDC-1-AC Bedienungsanleitung

Nikon

Nikon AF-S TC-20E III Bedienungsanleitung

Axis

Axis AXIS Q7406 Bedienungsanleitung

Omega

Omega TAC80B-J Bedienungsanleitung

Zoom

Zoom Thunderbolt TAC-2R Bedienungsanleitung

OST

OST iConverter 10/100M Bedienungsanleitung

Vertiv

Vertiv Netsure Bedienungsanleitung

birddog

birddog MINI Bedienungsanleitung

Roland

Roland GI-10 Bedienungsanleitung

Wallenstein

Wallenstein WX310 Bedienungsanleitung

Pace

Pace MSS 200-1 Bedienungsanleitung

Solar Converters

Solar Converters EQ 12/24-50 Bedienungsanleitung

CYP

CYP EL-7400V Bedienungsanleitung

TIE

TIE MIDI 1i1o Bedienungsanleitung

DCS

DCS Vivaldi Upsampler Bedienungsanleitung

Westermo

Westermo MCW-211 SERIES Bedienungsanleitung