Advantech ADAM-6542 Bedienungsanleitung

ADAM-6542

10/100Base-TX Ethernet to 100Base-FX

WDM Single Strand Fiber Optic Converter

ADAM-6542 manual

This document is copyrighted, 2003, by Advantech Co., Ltd. All rights are

reserved. Advantech Co., Ltd., reserves the right to make improvements to

the products described in this manual at any time without notice.

No part of this manual may be reproduced, copied, translated or transmitted

in any form or by any means without the prior written permission of

Advantech Co., Ltd. Information provided in this manual is intended to be

accurate and reliable. However, Advantech Co., Ltd. assumes no

responsibility for its use, nor for any infringements upon the rights of third

parties which may result from its use.

Part No. 2003654200 1stEdition

PrintedTaiwan Feb. 2003

Advantech Customer Services

Each and every Advantech product is built to the most exacting specifica-

tions to ensure reliable performance in the unusual and demanding condi-

tions typical of industrial environments. Whether your new Advantech

equipment is destined for the laboratory or the factory floor, you can be

assured that your product will provide the reliability and ease of operation

for which the name Advantech has come to be known.

Your satisfaction is our number one concern. Here is a guide toAdvantech’s

customer services. To ensure you get the full benefit of our services, please

follow the instructions below carefully.

Technical Support

We want you to get the maximum performance from your products. So if

you run into technical difficulties, we are here to help. For most frequently

asked questions you can easily find answers in your product documenta-

tion. These answers are normally a lot more detailed than the ones we can

give over the phone.

Please consult this manual first. If you still cannot find the answer, gather

all the information or questions that apply to your problem and, with the

product close at hand, call your dealer. Our dealers are well trained and

ready to give you the support you need to get the most from your Advan-

tech products. In fact, most problems reported are minor and are able to be

easily solved over the phone.

In addition, free technical support is available from Advantech engineers

every business day. We are always ready to give advice on application

requirements or specific information on the installation and operation of

any of our products.

ADAM-6542 manual

Product Warranty

Advantech warrants to you, the original purchaser, that each of its products

will be free from defects in materials and workmanship for two years from

the date of purchase.

This warranty does not apply to any products which have been repaired or

altered by other than repair personnel authorized by Advantech, or which

have been subject to misuse, abuse, accident or improper installation. Ad-

vantech assumes no liability as a consequence of such events under the

terms of thisWarranty.

Because of Advantech’s high quality-control standards and rigorous test-

ing, most of our customers never need to use our repair service. If anAdvan-

tech product ever does prove defective, it will be repaired or replaced at no

charge during the warranty period. For out-of-warranty repairs, you will be

billed according to the cost of replacement materials, service time and

freight. Please consult your dealer for more details.

If you think you have a defective product, follow these steps:

1.Collect all the information about the problem encountered (e.g. type of

PC, CPU speed, Advantech products used, other hardware and software

used etc.). Note anything abnormal and list any on-screen messages you

get when the problem occurs.

2.Call your dealer and describe the problem. Please have your manual,

product, and any helpful information readily available.

3.If your product is diagnosed as defective, you have to request an RMA

number.When requesting an RMA (Return MaterialAuthorization) num-

ber, please access ADVANTECH’s RMA website: http://

www.advantech.com.tw/rma. If the web sever is shut down, please con-

tact our office directly. You should fill in the “Problem Repair

Form”,describing in detail the application environment, configuration,

and problems encountered. Note that error descriptions such as “does not

work” and “failure” are so general that we are then required to apply our

internal standard repair process.

4.Carefully pack the defective product, a completely filled-out Repair and

Replacement Order Card and a photocopy of dated proof of purchase

(such as your sales receipt) in a shippable container. A product returned

without dated proof of purchase is not eligible for warranty service.

5.Write the RMA number visibly on the outside of the package and ship it

prepaid to your dealer.

Contents

Chapter 1 Introduction.................................1-1

1.1 Introduction...................................................................... 1-2

1.2 Features............................................................................ 1-3

1.3 Specification .................................................................... 1-4

1.4 Package Checklist ........................................................... 1-4

1.5 Ordering Information: ..................................................... 1-4

Chapter 2 Installation ...................................1-5

2.1 Front / Rear View ............................................................. 1-6

2.2 Connecting the Hardware............................................... 1-7

2.2.1 Choosing a Location ..................................................................1-7

2.3 Network Connection ..................................................... 1-10

2.3.1 Connection to the devices ........................................................1-10

2.3.2 Connection to other Hubs or Switch ........................................1-10

2.3.3 Connection to fiber network .....................................................1-10

2.3.4 Power Connection ....................................................................1-11

Appendix A ....................................................1-13

ADAM-6542 manual

Figures

Figure 2-1 ADAM-6542-Front Panel............................................................ 1-6

Figure 2-2 ADAM-6542-Rear Panel ............................................................ 1-6

Figure 2-3 Panel Mounting ........................................................................... 1-7

Figure 2-4 Din Rail Mounting ....................................................................... 1-8

Figure 2-5 Piggyback Stack ........................................................................ 1-9

Figure A-1 RJ-45 Pin Assignment ............................................................. 1-14

Figure A-2 EIA/TIA-568B ............................................................................ 1-14

Tables

Table 2-1 ADAM-6542 LED Definition ....................................................... 1-6

ADAM-6542 manual

Chapter

Introduction

2ADAM-6542 manual

1.1 Introduction

The ADAM-6542 is an industrial grade converter which is designed to con-

vert Ethernet network to fiber network. It transparently converts Ethernet

signals into optic signals. The advantages of Fiber optic are wide bandwidth,

anti-EMI,and verysuitable forlong-distance transmission.Therefore, ADAM-

6542 is an ideal solution for “fiber to building”application in central offices or

local sites.

The ADAM-6542 provides three ways to be fixed in any industrial environ-

ments: DIN Rail, panel, piggyback mounting. The ADAM-6542 also supplies

+10~30 VDC operating voltage over the terminal block. In addition, the oper-

atingtemperature of theADAM-6542 isfrom -10~70°C.The above functions

make the ADAM-6542 a more stable and reliable industrial grade converter.

WDM Single Strand Fiber

TheADAM-6542adopts WDM(WavelengthDivisionMultiplexing) technol-

ogy that increases the information carrying capacity of fiber via multiplex

transmit and receive signals at different wavelengths on single strand cable.

The WDM technology is implemented in two sites: one is installed in the

ADAM-6542/W15, with transmitting channel of 1550nm and receiving chan-

nel of 1310nm. The other site is installed in the ADAM6542/W13, with trans-

mitting channel of 1310nm and receiving channel of 1550nm. Both transmit-

ting and receiving channel of ADAM- 6542/W15 and ADAM-6542/W13 are

multiplexed to a single strand cable. You can save half cabling cost when you

use ADAM-6542/W15 and ADAM-6542/W13 instead of your original dual

fiber converter.

High-SpeedTransmission

The ADAM-6542 supports MDI/MDI-X of auto detection. You don’t need to

crossover yourself. It also includes a switch controller that can automatically

sense transmission speed (10/100 Mbps). Both Ethernet port and fiber port

have memory buffers that support store-and-forward mechanism; it assures

data can be transmitted properly.

Flexible Mounting

The ADAM-6542 is extremely compact and it can be mounted via three

different ways. DIN rail, panel and piggyback mounting.

Inhaltsverzeichnis

Andere Advantech Medienkonverter Handbücher

Advantech

Advantech BB-USOPTL4 Bedienungsanleitung

Advantech

Advantech B+B SmartWorx IMcV-Giga-FiberLinX-III Bedienungsanleitung

Advantech

Advantech BB-485DRCI-PH Bedienungsanleitung

Advantech

Advantech SSPBMg-C200-BRE Bedienungsanleitung

Advantech

Advantech B+B SmartWorx Giga-MiniMc TX-SX Bedienungsanleitung

Advantech

Advantech BB-422PP9TB Bedienungsanleitung

Advantech

Advantech ADAM-4561 Bedienungsanleitung

Advantech

Advantech EKI-2541M/SC Bedienungsanleitung

Advantech

Advantech B+B SmartWorx IE-ModeConverter Bedienungsanleitung

Advantech

Advantech ADAM-6541 Bedienungsanleitung

Advantech

Advantech B+B SmartWorx 422CFCR Bedienungsanleitung

Advantech

Advantech B+B SmartWorx 232USB9M Bedienungsanleitung

Advantech

Advantech B+B SmartWorx Giga-MiniMc 856-10730-TX Bedienungsanleitung

Advantech

Advantech B+B SmartWorx 485OI9TB Bedienungsanleitung

Advantech

Advantech IE-Giga-MiniMc Bedienungsanleitung

Advantech

Advantech EKI-2741SX Bedienungsanleitung

Advantech

Advantech IMC-574I-SFP Bedienungsanleitung

Advantech

Advantech SSPBM-K80-BTE Bedienungsanleitung

Advantech

Advantech USB-4600 Series Bedienungsanleitung

Advantech

Advantech ADAM-4542+ Installations- und Betriebshandbuch

Advantech

Advantech ADAM-4561-CE Bedienungsanleitung

Advantech

Advantech BB-485LDRC9 Bedienungsanleitung

Advantech

Advantech VEGA-2002-3GS Bedienungsanleitung

Advantech

Advantech PCIE-1182 Installations- und Betriebshandbuch

Beliebte Medienkonverter Handbücher anderer Marken

SoundTraxx

SoundTraxx Blunami BLU-2200 Bedienungsanleitung

SPROLINK

SPROLINK VA1 Bedienungsanleitung

Acclaim Lighting

Acclaim Lighting DDC-1-AC Bedienungsanleitung

Nikon

Nikon AF-S TC-20E III Bedienungsanleitung

Axis

Axis AXIS Q7406 Bedienungsanleitung

Omega

Omega TAC80B-J Bedienungsanleitung

Zoom

Zoom Thunderbolt TAC-2R Bedienungsanleitung

OST

OST iConverter 10/100M Bedienungsanleitung

Vertiv

Vertiv Netsure Bedienungsanleitung

birddog

birddog MINI Bedienungsanleitung

Roland

Roland GI-10 Bedienungsanleitung

Wallenstein

Wallenstein WX310 Bedienungsanleitung

Pace

Pace MSS 200-1 Bedienungsanleitung

Solar Converters

Solar Converters EQ 12/24-50 Bedienungsanleitung

CYP

CYP EL-7400V Bedienungsanleitung

TIE

TIE MIDI 1i1o Bedienungsanleitung

DCS

DCS Vivaldi Upsampler Bedienungsanleitung

Westermo

Westermo MCW-211 SERIES Bedienungsanleitung