Advantech SOM-7565 A2 Bedienungsanleitung

User Manual

SOM-7565 A2

SOM-7565 A2 User Manual ii

The documentation and the software included with this product are copyrighted 2011

by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right

to make improvements in the products described in this manual at any time without

notice. No part of this manual may be reproduced, copied, translated or transmitted

in any form or by any means without the prior written permission of Advantech Co.,

Ltd. Information provided in this manual is intended to be accurate and reliable. How-

ever, Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringe-

ments of the rights of third parties, which may result from its use.

Acknowledgements

Intel® and Pentium® are trademarks of Intel Corporation.

Microsoft Windows and MS-DOS are registered trademarks of Microsoft Corp.

All other product names or trademarks are properties of their respective owners.

Product Warranty (2 years)

Advantech warrants to you, the original purchaser, that each of its products will be

free from defects in materials and workmanship for two years from the date of pur-

chase.

This warranty does not apply to any products which have been repaired or altered by

persons other than repair personnel authorized by Advantech, or which have been

subject to misuse, abuse, accident or improper installation. Advantech assumes no

liability under the terms of this warranty as a consequence of such events.

Because of Advantech’s high quality-control standards and rigorous testing, most of

our customers never need to use our repair service. If an Advantech product is defec-

tive, it will be repaired or replaced at no charge during the warranty period. For out-

of-warranty repairs, you will be billed according to the cost of replacement materials,

service time and freight. Please consult your dealer for more details.

If you think you have a defective product, follow these steps:

1. Collect all the information about the problem encountered. (For example, CPU

speed, Advantech products used, other hardware and software used, etc.) Note

anything abnormal and list any onscreen messages you get when the problem

occurs.

2. Call your dealer and describe the problem. Please have your manual, product,

and any helpful information readily available.

3. If your product is diagnosed as defective, obtain an RMA (return merchandize

authorization) number from your dealer. This allows us to process your return

more quickly.

4. Carefully pack the defective product, a fully-completed Repair and Replacement

Order Card and a photocopy proof of purchase date (such as your sales receipt)

in a shippable container. A product returned without proof of the purchase date

is not eligible for warranty service.

5. Write the RMA number visibly on the outside of the package and ship it prepaid

to your dealer.

Part No. 2006756510 Edition 1

Printed in Taiwan August 2013

iii SOM-7565 A2 User Manual

Declaration of Conformity

This product has passed the CE test for environmental specifications. Test conditions

for passing included the equipment being operated within an industrial enclosure. In

order to protect the product from being damaged by ESD (Electrostatic Discharge)

and EMI leakage, we strongly recommend the use of CE-compliant industrial enclo-

sure products.

FCC Class B

Note: This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installa-

tion. This equipment generates, uses and can radiate radio frequency energy and, if

not installed and used in accordance with the instructions, may cause harmful inter-

ference to radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause harmful interfer-

ence to radio or television reception, which can be determined by turning the equip-

ment off and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

This equipment has passed the FM certification. According to the National Fire Pro-

tection Association, work sites are classified into different classes, divisions and

groups, based on hazard considerations. This equipment is compliant with the speci-

fications of Class I, Division 2, Groups A, B, C and D indoor hazards.

Technical Support and Assistance

1. Visit the Advantech website at http://support.advantech.com where you can find

the latest information about the product.

2. Contact your distributor, sales representative, or Advantech's customer service

center for technical support if you need additional assistance. Please have the

following information ready before you call:

–Product name and serial number

–Description of your peripheral attachments

–Description of your software (operating system, version, application software,

etc.)

–A complete description of the problem

–The exact wording of any error messages

SOM-7565 A2 User Manual iv

Warnings, Cautions and Notes

Document Feedback

To assist us in making improvements to this manual, we would welcome comments

and constructive criticism. Please send all such - in writing to: support@advan-

tech.com

Packing List

Before setting up the system, check that the items listed below are included and in

good condition. If any item does not accord with the table, please contact your dealer

immediately.

SOM-7565 A2 CPU Module

1 x Heat spreader (1960055344N001)

Safety Instructions

1. Read these safety instructions carefully.

2. Keep this User Manual for later reference.

3. Disconnect this equipment from any AC outlet before cleaning. Use a damp

cloth. Do not use liquid or spray detergents for cleaning.

4. For plug-in equipment, the power outlet socket must be located near the equip-

ment and must be easily accessible.

5. Keep this equipment away from humidity.

6. Put this equipment on a reliable surface during installation. Dropping it or letting

it fall may cause damage.

7. The openings on the enclosure are for air convection. Protect the equipment

from overheating. DO NOT COVER THE OPENINGS.

8. Make sure the voltage of the power source is correct before connecting the

equipment to the power outlet.

Warning! Warnings indicate conditions, which if not observed, can cause personal

injury!

Caution! Cautions are included to help you avoid damaging hardware or losing

data. e.g.

There is a danger of a new battery exploding if it is incorrectly installed.

Do not attempt to recharge, force open, or heat the battery. Replace the

battery only with the same or equivalent type recommended by the man-

ufacturer. Discard used batteries according to the manufacturer's

instructions.

Note! Notes provide optional additional information.

v SOM-7565 A2 User Manual

9. Position the power cord so that people cannot step on it. Do not place anything

over the power cord.

10. All cautions and warnings on the equipment should be noted.

11. If the equipment is not used for a long time, disconnect it from the power source

to avoid damage by transient overvoltage.

12. Never pour any liquid into an opening. This may cause fire or electrical shock.

13. Never open the equipment. For safety reasons, the equipment should be

opened only by qualified service personnel.

14. If one of the following situations arises, get the equipment checked by service

personnel:

The power cord or plug is damaged.

Liquid has penetrated into the equipment.

The equipment has been exposed to moisture.

The equipment does not work well, or you cannot get it to work according to

the user's manual.

The equipment has been dropped and damaged.

The equipment has obvious signs of breakage.

15. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT WHERE THE

STORAGE TEMPERATURE MAY GO BELOW -20° C (-4° F) OR ABOVE 60° C

(140° F). THIS COULD DAMAGE THE EQUIPMENT. THE EQUIPMENT

SHOULD BE IN A CONTROLLED ENVIRONMENT.

16. CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY

REPLACED. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE

RECOMMENDED BY THE MANUFACTURER, DISCARD USED BATTERIES

ACCORDING TO THE MANUFACTURER'S INSTRUCTIONS.

The sound pressure level at the operator's position according to IEC 704-1:1982 is

no more than 70 dB (A).

DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech

disclaims all responsibility for the accuracy of any statements contained herein.

SOM-7565 A2 User Manual vi

Safety Precaution - Static Electricity

Follow these simple precautions to protect yourself from harm and the products from

damage.

To avoid electrical shock, always disconnect the power from your PC chassis

before you work on it. Don't touch any components on the CPU card or other

cards while the PC is on.

Disconnect power before making any configuration changes. The sudden rush

of power as you connect a jumper or install a card may damage sensitive elec-

tronic components.

vii SOM-7565 A2 User Manual

Contents

Chapter 1 General Information ............................1

1.1 Introduction ...............................................................................................2

1.2 Specifications............................................................................................2

1.2.1 Board Information .........................................................................2

1.2.2 System Information.......................................................................2

1.2.3 Display..........................................................................................2

1.2.4 Expansion Interface......................................................................2

1.2.5 I/O.................................................................................................3

1.2.6 iManager 2.0.................................................................................3

1.2.7 Mechanical and Environmental Specification ...............................3

1.3 Functional Block Diagram .........................................................................4

Figure 1.1 Functional Block Diagram...........................................4

1.4 SOM-7565 A2 Type 10 Pin Assignment ...................................................4

Chapter 2 Mechanical Information ......................7

2.1 Board Information......................................................................................8

Figure 2.1 Board chips identify - Front.........................................8

Figure 2.2 Board chips identify - Back.........................................9

2.2 Mechanical Drawing..................................................................................9

Figure 2.3 Board Mechanical Drawing - Front.............................9

Figure 2.4 Board Mechanical Drawing - Back ...........................10

Chapter 3 BIOS....................................................11

Figure 3.1 BIOS Setup Utility Main Screen................................12

3.1 Entering Setup ........................................................................................12

3.2 Hot / Operation key .................................................................................12

3.2.1 Left / Right Key ...........................................................................12

3.2.2 ESC key......................................................................................12

3.2.3 Enter Key....................................................................................12

3.2.4 + / - key.......................................................................................13

3.2.5 F1 key.........................................................................................13

3.2.6 F2 key.........................................................................................13

3.2.7 F3 key.........................................................................................13

3.2.8 F4 key.........................................................................................13

3.3 Exit BIOS Setup Utility ............................................................................13

Chapter 4 S/W Introduction & Installation ........15

4.1 S/W Introduction......................................................................................16

4.2 Driver Installation ....................................................................................16

4.2.1 Windows XP / Windows 7 Driver Setup......................................16

4.2.2 Other OS.....................................................................................16

4.3 Advantech iManager ...............................................................................16

Appendix A Watchdog Timer ................................19

A.1 Programming the Watchdog Timer.........................................................20

SOM-7565 A2 User Manual viii

Appendix B Programming GPIO...........................21

B.1 GPIO Register......................................................................................... 22

Appendix C System Assignments........................ 23

C.1 System I/O Ports..................................................................................... 24

Table C.1: System I/O ports....................................................... 24

C.2 DMA Channel Assignments.................................................................... 25

Table C.2: DMA channel assignments....................................... 25

C.3 Interrupt Assignments............................................................................. 25

Table C.3: Interrupt assignments............................................... 25

C.4 1st MB Memory Map............................................................................... 26

Table C.4: 1st MB memory map................................................ 26

Chapter 1

1General Information

This chapter gives background

information on the SOM-7565 A2

CPU Computer on Module

Sections include:

Introduction

Specification

Functional Block Diagram

SOM-7565 A2 Type 10 Pin

Assignment

SOM-7565 A2 User Manual 2

1.1 Introduction

SOM-7565 A2 is a COM-Express Mini module with pin-out Type 10 that fully com-

plies with the PICMG (PCI Industrial Computer Manufactures Group) COM.0 R2.1

specification. The new CPU module uses an Intel Atom processor N2800/N2600

which contains Intel GFX Core GMA3600 supports full MPEG2, AVC/H.264, and VC-

1 HW decode/acceleration, with NM10 chipset which supports advance expansion

interface like PCI Express and I/O interface like Serial ATA (SATA), USB2.0. In a

COM-Mini form factor of 84mm x 55mm, SOM-7565 A2 provides a balance of high

performance and easy to integrate solution for customers’ applications by utilizing a

plug-in CPU module on an application-specific customer solution board. With

advanced interfaces like PCI Express, SATA, USB 2.0, and HDMI/DVI/DP interfaces,

it provides not only high speed/performance but also small pin-count that user easy

to integrate in to system. SOM-7565 A2 offers design partners more choices for their

own applications needing higher computing speeds while maintaining a compact

form factor.

1.2 Specifications

1.2.1 Board Information

Pin Definition: PICMG COM.0 R2.1 Type 10 pin-out definition

Form Factor: PICMG COM.0 R2.1 Mini Module 84 x 55 mm

1.2.2 System Information

CPU: Onboard Intel® Atom N2600 1.6GHz/N2800 1.86GHz processor, 1MB L2

Cache

Chipset: Intel® NM10 Express Chipset

Memory: On board DDR3 800MHz 2GB memory for N2600

Up to 4GB on board DDR3 1066MHz memory for N2800

BIOS: AMI UEFI 16Mbit SPI BIOS

Power management: Supports power saving modes including Normal /

Standby / Suspend modes. ACPI 2.0 compliant

1.2.3 Display

Graphic Core: Intel Atom integrated GMA3600 400MHz, supports DX9,

OGL3.0, and MPEG2, AVC/H.264, VC-1 HW decode/acceleration

LVDS: Supports 1-CH 18-bit, resolution up to 1366 x 768

HDMI/DVI/DP: Supports 1 port HDMI (default), DVI, or DP multiplexed (BIOS

modification needed).

Resolution: HDMI/DVI up to 1920 x 1200

DP up to 1600 x 1200

Dual Display: Supports LVDS + HDMI/DVI/DP

1.2.4 Expansion Interface

PCI Express x1: 3 ports or 4 ports (BOM option), PCI Express 1.0a compliant

Audio Interface: Intel HD Audio interface

LPC Bus

SMBus

I2C Bus: Up to 400KHz

SPI: Supports SPI BIOS only

Inhaltsverzeichnis

Andere Advantech Hauptplatine Handbücher

Advantech

Advantech AIMB-210 Bedienungsanleitung

Advantech

Advantech ROM-DB7502 Bedienungsanleitung

Advantech

Advantech PCA-6743 Installations- und Betriebshandbuch

Advantech

Advantech AIMB-210 Installations- und Betriebshandbuch

Advantech

Advantech AIMB-780 Bedienungsanleitung

Advantech

Advantech PCM-3342 Bedienungsanleitung

Advantech

Advantech SOM-5787 Bedienungsanleitung

Advantech

Advantech PCE-7131 Bedienungsanleitung

Advantech

Advantech mATX i915GV2-IGM Series Bedienungsanleitung

Advantech

Advantech PCM-4386 Installations- und Betriebshandbuch

Advantech

Advantech ASMB-586 Bedienungsanleitung

Advantech

Advantech ASMB-788 Bedienungsanleitung

Advantech

Advantech PCM-9377 Bedienungsanleitung

Advantech

Advantech AIMB-701 LGA1155 Bedienungsanleitung

Advantech

Advantech SOM-DB5920 A1 Bedienungsanleitung

Advantech

Advantech MIOe-DB5000 Bedienungsanleitung

Advantech

Advantech AIMB-542 Series Bedienungsanleitung

Advantech

Advantech MIO-3360 Installations- und Betriebshandbuch

Advantech

Advantech PCA-6155 Bedienungsanleitung

Advantech

Advantech PCM-4372 Bedienungsanleitung

Advantech

Advantech PCA-6187VE-00A2 Bedienungsanleitung

Advantech

Advantech AIMB-740-6CB1 Bedienungsanleitung

Advantech

Advantech SIMB-A21 Installations- und Betriebshandbuch

Advantech

Advantech PCE-7210 Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Biostar

Biostar M7VIT Bravo Bedienungs- und Montageanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung