Advantech IMC-710-A Bedienungsanleitung

User Manual

SNMP Management

Module (IMC-710-A)

SNMP Management Module User Manual ii

The documentation and the software included with this product are copyrighted 2021

by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right

to make improvements in the products described in this manual at any time without

notice. No part of this manual may be reproduced, copied, translated or transmitted

in any form or by any means without the prior written permission of Advantech Co.,

Ltd. Information provided in this manual is intended to be accurate and reliable.

However, Advantech Co., Ltd. assumes no responsibility for its use, nor for any

infringements of the rights of third parties, which may result from its use.

Acknowledgements

Intel and Pentium are trademarks of Intel Corporation.

Microsoft Windows and MS-DOS are registered trademarks of Microsoft Corp.

All other product names or trademarks are properties of their respective owners.

Product Warranty (5 years)

Advantech warrants to you, the original purchaser, that each of its products will be

free from defects in materials and workmanship for five years from the date of pur-

chase.

This warranty does not apply to any products which have been repaired or altered by

persons other than repair personnel authorized by Advantech, or which have been

subject to misuse, abuse, accident or improper installation. Advantech assumes no

liability under the terms of this warranty as a consequence of such events.

Because of Advantech’s high quality-control standards and rigorous testing, most of

our customers never need to use our repair service. If an Advantech product is defec-

tive, it will be repaired or replaced at no charge during the warranty period. For out of-

warranty repairs, you will be billed according to the cost of replacement materials,

service time and freight. Please consult your dealer for more details.

If you think you have a defective product, follow these steps:

1. Collect all the information about the problem encountered. (For example, CPU

speed, Advantech products used, other hardware and software used, etc.) Note

anything abnormal and list any on screen messages you get when the problem

occurs.

2. Call your dealer and describe the problem. Please have your manual, product,

and any helpful information readily available.

3. If your product is diagnosed as defective, obtain an RMA (return merchandize

authorization) number from your dealer. This allows us to process your return

more quickly.

4. Carefully pack the defective product, a fully-completed Repair and Replacement

Order Card and a photocopy proof of purchase date (such as your sales receipt)

in a shippable container. A product returned without proof of the purchase date

is not eligible for warranty service.

5. Write the RMA number visibly on the outside of the package and ship it prepaid

to your dealer.

Edition 1

Printed in Taiwan December 2021

iii SNMP Management Module User Manual

Regulatory, Standards, Compliances

This product has passed the CE test for environmental specifications. Test conditions

for passing included the equipment being operated within an industrial enclosure. In

order to protect the product from being damaged by ESD (Electrostatic Discharge)

and EMI leakage, we strongly recommend the use of CE-compliant industrial

enclosure products.

FCC Class A

Note: This equipment has been tested and found to comply with the limits for a Class

A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at his

own expense.

Technical Support and Assistance

1. Visit the Advantech web site at www.advantech.com/support where you can find

the latest information about the product.

2. Contact your distributor, sales representative, or Advantech's customer service

center for technical support if you need additional assistance. Please have the

following information ready before you call:

–Product name and serial number

–Description of your peripheral attachments

–Description of your software (operating system, version, application software,

etc.)

–A complete description of the problem

–The exact wording of any error messages

SNMP Management Module User Manual iv

Warnings, Cautions and Notes

Document Feedback

To assist us in making improvements to this manual, we would welcome comments

and constructive criticism. Please send all such - in writing to:

[email protected]

Warning! Important safety instructions save these instructions - this manual con-

tains important safety instructions.

Caution! For use in a controlled environment. Refer to manual for environmental

conditions.

Note! Notes provide optional additional information.

v SNMP Management Module User Manual

Statements, Precautions, Guidelines, Regulatory

FCC Radio Frequency Interference Statement

This equipment has been tested and found to comply with the limits for a Class A

computing device, pursuant to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful

interference in which the user will be required to correct the interference at his own

expense.

Any changes or modifications not expressly approved by the manufacturer could void

the user’s authority to operate the equipment.

The use of non-shielded I/O cables may not guarantee compliance with FCC RFI

limits. This digital apparatus does not exceed the Class A limits for radio noise

emission from digital apparatus set out in the Radio Interference Regulation of the

Canadian Department of Communications.

Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les

limites applicables aux appareils numériques de classe A prescrites dans le

Règlement sur le brouillage radioélectrique publié par le ministère des

Communications du Canada.

Electrostatic Discharge (ESD) Precautions

Electrostatic discharge (ESD) can cause damage to any product, add-in modules or

stand alone units, containing electronic components. Always observe the following

precautions when installing or handling these kinds of products.

1. Do not remove unit from its protective packaging until ready to install.

2. Wear an ESD wrist grounding strap before handling any module or component.

If the wrist strap is not available, maintain grounded contact with the system unit

throughout any procedure requiring ESD protection.

3. Hold units by the edges; do not touch the electronic components or gold con-

nectors.

4. After removal, always place boards on a grounded, static-free surface, ESD pad

or in a proper ESD bag. Do not slide the modules or stand-alone units over any

surface.

Fiber Optic Cleaning Guidelines

Fiber Optic transmitters and receivers are extremely susceptible to contamination by

particles of dirt or dust, which can obstruct the optic path and cause performance

degradation. Good system performance requires clean optics and connector ferrules.

1. Use fiber patch cords (or connectors, if you terminate your own fiber) only from

a reputable supplier; low-quality components can cause many hard-to-diagnose

problems in an installation.

Warning! Integrated circuits and fiber optic components are extremely susceptible

to electrostatic discharge damage. Do not handle these components

directly unless you are a qualified service technician and use tools and

techniques that conform to accepted industry practices.

SNMP Management Module User Manual vi

2. Dust caps are installed at the factory to ensure factory-clean optical devices.

These protective caps should not be removed until the moment of connecting

the fiber cable to the device. Should it be necessary to disconnect the fiber

device, reinstall the protective dust caps.

3. Store spare caps in a dust-free environment such as a sealed plastic bag or box

so that, when reinstalled, they do not introduce any contamination to the optics.

4. If you suspect that the optics have been contaminated, alternate between blast-

ing with clean, dry, compressed air and flushing with methanol to remove parti-

cles of dirt.

Regulatory, Standards, Compliances

UL/CUL: Listed to Safety of Information Technology Equipment, including Electrical

Business Equipment.

CE: The products described herein comply with the Council Directive on

Electromagnetic Compatibility (2004/108/EC) and the Council Directive on Electrical

Equipment Designed for use within Certain Voltage Limits (2006/95/EC). Conforms

to UL Std. 60950-1; Certified to CSA Std. C22.2 No. 60950-1

European Directive 2002/96/EC (WEEE) requires that any equipment that bears this

symbol on product or packaging must not be disposed of with unsorted municipal

waste. This symbol indicates that the equipment should be disposed of separately

from regular household waste. It is the consumer’s responsibility to dispose of this

and all equipment so marked through designated collection facilities appointed by

government or local authorities. Following these steps through proper disposal and

recycling will help prevent potential negative consequences to the environment and

human health. For more detailed information about proper disposal, please contact

local authorities, waste disposal services, or the point of purchase for this equipment.

subject to change without notice. Advantech assumes no responsibility for any errors

that may appear in this document. SNMP Management Module is a trademark of

Advantech. Other brands or product names may be trademarks and are the property

of their respective companies.

Class 1 Laser product, Luokan 1 Laserlaite,

Laser Klasse 1, Appareil A’Laser de Classe 1

vii SNMP Management Module User Manual

Contents

Chapter 1 Product Overview ................................1

1.1 SNMP Management Module ..................................................................... 2

1.2 Specifications ............................................................................................ 2

1.3 Hardware Views ........................................................................................ 3

1.3.1 Front View..................................................................................... 3

1.3.2 System LED Panels ...................................................................... 3

1.3.3 Installation Guidelines................................................................... 3

1.3.4 Configuration................................................................................. 4

1.3.5 Using SNMP Write Lock Switch.................................................... 4

Chapter 2 Web-HTTP Function ............................5

2.1 Web-HTTP ................................................................................................ 6

2.2 Serial Port Configuration ........................................................................... 6

2.3 Using Telnet .............................................................................................. 6

2.4 Using DHCP.............................................................................................. 7

2.4.1 DHCP Disable (Static IP Addressing) ........................................... 7

2.4.2 DHCP Enable (Dynamic IP Addressing)....................................... 7

2.5 Main Serial/Telnet Configuration Screen .................................................. 7

Chapter 3 iView2 Software Installation..............10

3.1 Overview ................................................................................................. 11

3.2 Using iView² ............................................................................................ 11

3.2.1 System Requirements................................................................. 11

3.2.2 Other NMS Applications.............................................................. 11

3.3 iView² (Webserver Version) .................................................................... 12

3.4 UMA (Unified Management Agent) ......................................................... 12

3.5 Easy Upgrades with the Unified Management Agent (UMA) .................. 12

3.6 iView Passwords ..................................................................................... 12

SNMP Management Module User Manual viii

List of Figures

Figure 1.1 Front View ..................................................................................................................... 3

Figure 1.2 System LED .................................................................................................................. 3

Chapter 1

1Product Overview

SNMP Management Module User Manual 2

1.1 SNMP Management Module

The SNMP Management Module includes two twisted-pair ports: one for management, and

one reserved for future use. The SNMP Management Module also features a DB-9 serial port.

Both twisted-pair ports support the AutoCross feature that automatically selects between a

crossover workstation or straight-through, depending on the connected device.

An iMediaChassis series with an installed Management Module connects to the LAN via an

external 10/100 twisted-pair connection. Connect the chassis to the network by plugging one

end of a CAT-5 twisted-pair cable into the port labeled MGMT on the Management Module.

Plug the other end of the cable into a device (e.g., switch, etc.) in the existing Ethernet

network.

1.2 Specifications

*Intended for indoor and outdoor use.

Note! Some options require items that are sold separately.

Specifications Description

Environmental* Operating

Temperature

0 to +50°C (+32 to +122°F)

Storage

Temperature

-6 to +71°C (+21 to +160°F)

Operating

Humidity

5 ~ 95°C (-41 ~ 203°F), non-condensing

Power Power

Consumption

600 mA @ 5V (typical)

Inhaltsverzeichnis

Andere Advantech Server Handbücher

Advantech

Advantech SKY-7210 Installations- und Betriebshandbuch

Advantech

Advantech EKI-1528-DR Bedienungsanleitung

Advantech

Advantech SKY-642 Bedienungsanleitung

Advantech

Advantech SKY-6200 Installations- und Betriebshandbuch

Advantech

Advantech BB-VESP211 Series Bedienungsanleitung

Advantech

Advantech AGS-910 Bedienungsanleitung

Advantech

Advantech AGS-923 2U Installations- und Betriebshandbuch

Advantech

Advantech EDG-4508 Bedienungsanleitung

Advantech

Advantech FWA-6510 Bedienungsanleitung

Advantech

Advantech DVG-1100 Bedienungsanleitung

Advantech

Advantech HPC-8108 Bedienungsanleitung

Advantech

Advantech sky-8100 Bedienungsanleitung

Advantech

Advantech ASMB-815 Series Installations- und Betriebshandbuch

Advantech

Advantech EKI-1511 Series Bedienungsanleitung

Advantech

Advantech PCE-5B12-00A1E Installations- und Betriebshandbuch

Advantech

Advantech EKI-1121L Bedienungsanleitung

Advantech

Advantech EKI-1512X Bedienungsanleitung

Advantech

Advantech RS-400-SF Bedienungsanleitung

Advantech

Advantech ADAM-4571L Bedienungsanleitung

Advantech

Advantech SKY-524 Bedienungsanleitung

Advantech

Advantech ARK-3381 Series Bedienungsanleitung

Advantech

Advantech BB-VESR9 Series Bedienungsanleitung

Advantech

Advantech SKY-8132S Bedienungsanleitung

Advantech

Advantech ECU-579 Series Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung