Advantech PPC-L106T Bedienungsanleitung

PPC-L106T

AMD LX800 processor-based

Panel PC with 10.4" TFT LCD flat

panel display

User Manual

PPC-L106T User Manual ii

nal manufacturer reserves the right to make improvements to the products

described in this manual at any time without notice.

No part of this manual may be reproduced, copied, translated or transmit-

ted in any form or by any means without the prior written permission of

the original manufacturer. Information provided in this manual is

intended to be accurate and reliable. However, the original manufacturer

assumes no responsibility for its use, nor for any infringements upon the

rights of third parties that may result from such use.

Acknowledgements

Award is a trademark of Award Software International, Inc.

AMD is a trademark of Advanced Micro Devices, Inc.

IBM, PC/AT, PS/2 and VGA are trademarks of International Business

Machines Corporation.

Intel and Pentium are trademarks of Intel Corporation.

Microsoft Windows® is a registered trademark of Microsoft Corp.

RTL is a trademark of Realtek Semi-Conductor Co., Ltd.

ESS is a trademark of ESS Technology, Inc.

UMC is a trademark of United Microelectronics Corporation.

SMI is a trademark of Silicon Motion, Inc.

Creative is a trademark of Creative Technology Ltd.

All other product names or trademarks are properties of their respective

owners.

This manual is for the PPC-L106T.

Part No. 2006106T00

1st Edition, Printed in Taiwan November, 2006

iii

FCC Class B

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interfer-

ence when the equipment is operated in a residential environment. This

equipment generates, uses and can radiate radio frequency energy. If not

installed and used in accordance with this user manual, it may cause

harmful interference to radio communications. Note that even when this

equipment is installed and used in accordance with this user manual, there

is still no guarantee that interference will not occur. If this equipment is

believed to be causing harmful interference to radio or television recep-

tion, this can be determined by turning the equipment on and off. If inter-

ference is occurring, the user is encouraged to try to correct the

interference by one or more of the following measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment and the receiver

• Connect the equipment to a power outlet on a circuit different from that

to which the receiver is connected

• Consult the dealer or an experienced radio/TV technician for help

Warning! Any changes or modifications made to the

equipment which are not expressly approved by

the relevant standards authority could void your

authority to operate the equipment.

PPC-L106T User Manual iv

Packing List

Before you begin installing your card, please make sure that the following

materials have been shipped:

• PPC-L106T series panel PC

• Accessories for PPC-L106T

- Keyboard extension cable (5-pin DIN female to 6-pin PS/2 male)

- HDD flat cable (44-pin) (8 cm)

- Power cord (1.8 m) - USA type

- HDD bracket

- Driver/Utility CD-ROM disk

- Screws

- Warranty card

If any of these items are missing or damaged, contact your distributor or

sales representative immediately.

Additional Information and Assistance

Step 1. Visit the our web site where you can find the latest

information about the product.

Step 2. Contact your distributor, sales representative, or customer

service center for technical support if you need additional

assistance. Please have the following information ready before

you call:

• Product name and serial number

• Description of your peripheral attachments

• Description of your software (operating system, version, application

software, etc.)

• A complete description of the problem

• The exact wording of any error messages

Safety Instructions

1. Please read these safety instructions carefully.

2. Please keep this User Manual for later reference.

3. Please disconnect this equipment from any AC outlet before cleaning. Do not

use liquid or spray detergents for cleaning. Use a damp cloth.

4. For pluggable equipment, the socket-outlet must be installed near the equip-

ment and must be easily accessible.

5. Please keep this equipment away from humidity.

6. Put this equipment on a reliable surface during installation. Dropping it or let-

ting it fall could cause damage.

7. The openings on the enclosure are for air convection. Protect the equipment

from overheating. DO NOT COVER THE OPENINGS.

8. Make sure the voltage of the power source is correct before connecting the

equipment to the power outlet.

9. Position the power cord so that people cannot step on it. Do not place anything

over the power cord.

10. All cautions and warnings on the equipment should be noted.

11. If the equipment is not used for a long time, disconnect it from the power

source to avoid damage by transient overvoltage.

12. Never pour any liquid into an opening. This could cause fire or electrical

shock.

13. Never open the equipment. For safety reasons, the equipment should be

opened only by qualified service personnel.

14. If one of the following situations arises, get the equipment checked by service

personnel:

a. The power cord or plug is damaged.

b. Liquid has penetrated into the equipment.

c. The equipment has been exposed to moisture.

d. The equipment does not work well, or you cannot get it to work according

to the user manual.

e. The equipment has been dropped and damaged.

f. The equipment has obvious signs of breakage.

15. DO NOT LEAVE THIS EQUIPMENT IN AN UNCONTROLLED ENVI-

RONMENT WHERE THE STORAGE TEMPERATURE MAY GO

BELOW -20° C (-4° F) OR ABOVE 60° C (140° F). IT MAY DAMAGE

THE EQUIPMENT.

The sound pressure level at the operator's position according to IEC 704-

1:1982 is equal to or less than 70 dB(A).

DISCLAIMER: This set of instructions is supplied according to IEC 704-

1. We disclaim all responsibility for the accuracy of any state-

ments contained herein.

PPC-L106T User Manual vi

W i c h t i g e S i c h e r h e i s h i n w e i s e

1. Bitte lesen sie Sich diese Hinweise sorgfältig durch.

2. Heben Sie diese Anleitung für den späteren Gebrauch auf.

3. Vor jedem Reinigen ist das Gerät vom Stromnetz zu trennen. Verwenden Sie

Keine Flüssig-oder Aerosolreiniger. Am besten dient ein angefeuchtetes Tuch

zur Reinigung.

4. Die NetzanschluBsteckdose soll nahe dem Gerät angebracht und leicht

zugänglich sein.

5. Das Gerät ist vor Feuchtigkeit zu schützen.

6. Bei der Aufstellung des Gerätes ist auf sicheren Stand zu achten. Ein Kippen

oder Fallen könnte Verletzungen hervorrufen.

7. Die Belüftungsöffnungen dienen zur Luftzirkulation die das Gerät vor überhit-

zung schützt. Sorgen Sie dafür, daB diese Öffnungen nicht abgedeckt werden.

8. Beachten Sie beim. AnschluB an das Stromnetz die AnschluBwerte.

9. Verlegen Sie die NetzanschluBleitung so, daB niemand darüber fallen kann.

Es sollte auch nichts auf der Leitung abgestellt werden.

10. Alle Hinweise und Warnungen die sich am Geräten befinden sind zu

beachten.

11. Wird das Gerät über einen längeren Zeitraum nicht benutzt, sollten Sie es vom

Stromnetz trennen. Somit wird im Falle einer Überspannung eine Beschädi-

gung vermieden.

12. Durch die Lüftungsöffnungen dürfen niemals Gegenstände oder Flüssigkeiten

in das Gerät gelangen. Dies könnte einen Brand bzw. elektrischen Schlag aus-

lösen.

13. Öffnen Sie niemals das Gerät. Das Gerät darf aus Gründen der elektrischen

Sicherheit nur von authorisiertem Servicepersonal geöffnet werden.

14. Wenn folgende Situationen auftreten ist das Gerät vom Stromnetz zu trennen

und von einer qualifizierten Servicestelle zu überprüfen:

a - Netzkabel oder Netzstecker sind beschädigt.

b - Flüssigkeit ist in das Gerät eingedrungen.

c - Das Gerät war Feuchtigkeit ausgesetzt.

d - Wenn das Gerät nicht der Bedienungsanleitung entsprechend funktioniert

oder Sie mit Hilfe dieser Anleitung keine Verbesserung erzielen.

e - Das Gerät ist gefallen und/oder das Gehäuse ist beschädigt.

f - Wenn das Gerät deutliche Anzeichen eines Defektes aufweist.

15. VOSICHT: Explisionsgefahr bei unsachgemaben Austausch der Batte-

rie.Ersatz nur durch densellben order einem vom Hersteller empfohlene-

mahnlichen Typ. Entsorgung gebrauchter Batterien navh Angaben des

Herstellers.

Der arbeitsplatzbezogene Schalldruckpegel nach DIN 45 635 Teil 1000

beträgt 70dB(A) oder weiger.

DISCLAIMER: This set of instructions is supplied according to IEC704-

1. We disclaim all responsibility for the accuracy of any state-

ments contained herein.

vii

Contents

Chapter 1 General Information ........................................2

1.1 Introduction ....................................................................... 2

1.2 Specifications .................................................................... 2

1.3 LCD Specifications ........................................................... 5

1.4 Dimensions........................................................................ 6

1.5 I/O Arrangement ............................................................... 7

1.6 Cutout (Suggestion)........................................................... 8

1.7 Mounting ........................................................................... 9

1.7.1 Panel mounting ............................................................... 9

1.7.2 Desktop stand (optional)............................................... 10

1.7.3 Wall-mounting (optional) ............................................. 11

Chapter 2 System Setup...................................................14

2.1 General ............................................................................ 14

2.2 Preparing For First Time Use.......................................... 14

2.3 Installing Options ............................................................ 15

2.3.1 Removing Rear Panel ................................................... 15

2.3.2 Installing a primary 2.5" HDD (internal)...................... 16

2.4 Installing I/O Equipment................................................. 17

2.4.1 PS/2 keyboard and PS/2 mouse .................................... 17

2.4.2 Mic-in, line-out ............................................................. 17

2.4.3 External VGA ............................................................... 17

2.4.4 Four serial COM ports .................................................. 17

2.4.5 Ethernet......................................................................... 18

2.4.6 USB ports...................................................................... 18

2.5 Installing Software to the HDD....................................... 18

2.5.1 Method 1: Use the Ethernet .......................................... 18

2.5.2 Method 2: Use a USB Disk or USB CD-ROM ............ 18

2.5.3 Method 3: Use the COM or parallel port...................... 18

2.6 Exploded Diagram........................................................... 19

2.7 PCM-9679 and I/O Adapter Replacement ...................... 20

Chapter 3 The Engine of the PPC-L106T (PCM-9679)24

3.1 Introduction ..................................................................... 24

3.2 Features ........................................................................... 25

3.3 Jumpers and Connectors.................................................. 26

3.3.1 Setting jumpers ............................................................. 26

3.3.2 Jumpers ......................................................................... 27

3.3.3 Connectors .................................................................... 27

3.4 CMOS Clear for External RTC (J3)................................ 29

3.5 COM Port Interface (J6, J7) ............................................ 29

PPC-L106T User Manual viii

3.5.1 COM2 RS-232/422/485 setting (J6)............................. 29

3.5.2 COM3/COM4 pin 9 output setting (J7)........................ 31

Chapter A I/O Pin Assignments.......................................42

A.1 Keyboard connector (CN5-1).......................................... 42

A.2 Mouse connector (CN5-2)............................................... 42

A.3 VGA connector (CN6) .................................................... 43

A.4 COM1 RS-232 serial port (CN1-2)................................. 43

A.5 COM3 RS-232 serial port connector (CN2-1) ................ 44

A.6 COM4 RS-232 serial port connector (CN2-2) ................ 44

A.7 COM2 Connector ............................................................ 45

A.8 Parallel port connector (CN1-1)..................................... 46

A.9 GPIO Connector (Default: No Load).............................. 47

A.10 USB 3 / USB 4 Connector (Internal) .............................. 47

A.11 SMBUS Connector (Default :No Load).......................... 48

Chapter 1 General Information 1

CHAPTER

General Information

This chapter gives background

information on the PPC-L106T.

Sections include:

• Introduction

• Specifications

• LCD Specifications

• Dimensions

• I/O Arrangement

• Cutout (Suggestion)

• Mounting

2 PPC-L106T User Manual

Chapter 1 General Information

1.1 Introduction

The PPC-L106T is a 10.4" LCD Panel PC with an AMD LX800 CPU that

is designed to serve as a human machine interface (HMI). It is a PC-based

system with 10.4" color TFT LCD display, on-board PCI Ethernet, multi-

COM port interfaces, and a 16-bit audio controller. This simple, com-

plete, compact and highly integrated multimedia system lets you easily

build a panel PC into your applications. By incorporating the PPC-L106T

into your project, your product development time will be shortened.

The PPC-L106T is a compact, network-compatible PC with extensive

features to control a dedicated system in a wide variety of applications.

Common industrial applications include factory automation systems, pre-

cision machinery, and production process control. It is also suitable for

many nonindustrial applications, including terminal information systems,

entertainment management systems, and car park automation systems.

Our panel PC is a reliable, cost-effective solution to your application's

processing requirements.

1.2 Specifications

General

• Dimensions (W x H x D): 342 x 265 x 92.4 mm

(13.5"x10.4"x3.6")

• Weight: 3.2 kg (7.1 lbs)

• Power supply:

AC model: 65 watts

Input voltage: 100 ~ 240Vac, 2A, 50 ~ 60 Hz

Output voltage: +5 V @ 3.5 A, +12 V @ 4 A

• Safety: UL/CB/CCC/BSMI approved

• Disk drive housing: Space for one internal 2.5" HDD

• Front panel protection: IP 65/NEMA 4 compliant

Standard PC functions

• CPU: AMD LX800 (500 MHz) processor on board

• BIOS:

AWARD 4M bit Flash BIOS, supports Plug & Play, APM v1.2

• Chipset: AMD CS 5536

Inhaltsverzeichnis

Andere Advantech Touchscreen Handbücher

Advantech

Advantech TPC-650 Bedienungsanleitung

Advantech

Advantech Intel XScale PXA Touch Panel Computer TPC-66... Bedienungsanleitung

Advantech

Advantech PPC-3150SW Bedienungsanleitung

Advantech

Advantech POC-128 Gebrauchsanweisung

Advantech

Advantech PPC-L157T Bedienungsanleitung

Advantech

Advantech IPPC-4001 Series Bedienungsanleitung

Advantech

Advantech PPC-177T Bedienungsanleitung

Advantech

Advantech TPC-2000 Series Bedienungsanleitung

Advantech

Advantech IPPC-9120G Bedienungsanleitung

Advantech

Advantech IPPC-9151G Bedienungsanleitung

Advantech

Advantech TPC-B610 Bedienungsanleitung

Advantech

Advantech TPC-1250H Bedienungsanleitung

Advantech

Advantech PPC-6121 Bedienungsanleitung

Advantech

Advantech PPC-3150SW Installations- und Betriebshandbuch

Advantech

Advantech POC-174 Bedienungsanleitung

Advantech

Advantech PPC-3151W Installations- und Betriebshandbuch

Advantech

Advantech PPC-415 Installations- und Betriebshandbuch

Advantech

Advantech RUGGED PENTIUM IPPC-9120 Bedienungsanleitung

Advantech

Advantech PPC-306 EHL Installations- und Betriebshandbuch

Advantech

Advantech PPC-315W TGL Bedienungsanleitung

Advantech

Advantech SPC-515 Series Bedienungsanleitung

Advantech

Advantech PPC-120 Bedienungsanleitung

Advantech

Advantech PPC-100 Bedienungsanleitung

Advantech

Advantech TPC-1770 Bedienungsanleitung

Beliebte Touchscreen Handbücher anderer Marken

FlowLine

FlowLine Data loop Bedienungsanleitung

ALPEX

ALPEX AEx-8 P Series Bedienungsanleitung

Ltech

Ltech E5S Bedienungsanleitung

Harman

Harman AMX MODERO S MSD-701-L2 Bedienungsanleitung

Acnodes

Acnodes PC 1150 Bedienungsanleitung

AIS

AIS IP10IA99 series Bedienungsanleitung

IBASE Technology

IBASE Technology ASTUT-152-RE1S Bedienungsanleitung

YASKAWA

YASKAWA TP 610C Bedienungsanleitung

B&R

B&R Power Panel C Series Bedienungsanleitung

Beijer Electronics

Beijer Electronics X2 control Bedienungsanleitung

AXIOMTEK

AXIOMTEK GOT321W-521 Bedienungsanleitung

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Bedienungsanleitung

Qomo

Qomo QIT1386 Bedienungsanleitung

DFI

DFI KS104-CD Bedienungsanleitung

AMX

AMX AXP-PPC Leitfaden

Sartorius

Sartorius X3 PR 5410 Bedienungsanleitung

AMX

AMX Modero X Series Bedienungsanleitung

B&R Industries

B&R Industries MAPPC900-ENG Bedienungsanleitung