AEMC instruments MR6292 Bedienungsanleitung
AC/DC Current Probe
Model MR6292
User Manual
ENGLISH
CURRENT PROBE
WITH AEMC
®
INSTRUMENTS
Copyright © Chauvin Arnoux®, Inc. d.b.a. AEMC®Instruments. All rights reserved.
No part of this documentation may be reproduced in any form or by any means (including electronic
storage and retrieval or translation into any other language) without prior agreement and written consent
from Chauvin Arnoux®, Inc., as governed by United States and International copyright laws.
Chauvin Arnoux®, Inc. d.b.a. AEMC®Instruments
15 Faraday Drive • Dover, NH 03820 USA
Tel: (800) 945-2362 or (603) 749-6434 • Fax: (603) 742-2346
This documentation is provided “as is,” without warranty of any kind, express, implied, or otherwise.
Chauvin Arnoux®
but does not warrant the accuracy or completeness of the text, graphics, or other information contained
in this documentation. Chauvin Arnoux®, Inc. shall not be liable for any damages, special, indirect,
user of the documentation has been advised of the possibility of such damages.
Statement of Compliance
Chauvin Arnoux®, Inc. d.b.a. AEMC® Instruments
using standards and instruments traceable to
international standards.
We guarantee that at the time of shipping your
An NIST traceable certicate may be requested
at the time of purchase, or obtained by returning
the instrument to our repair and calibration
facility, for a nominal charge.
The recommended calibration interval for this
instrument is 12 months and begins on the date of
receipt by the customer. For recalibration, please
use our calibration services. Refer to our repair and
calibration section at www.aemc.com.
Serial #:
Catalog #: 2129.86
Model #: MR6292
ll in the appropriate date as indicated:
Date Received:
Date Calibration Due:
Chauvin Arnoux®, Inc.
d.b.a AEMC®Instruments
www.aemc.com
4
AC/DC Current Probe Model MR6292
TABLE OF CONTENTS
1. INTRODUCTION ................................................................................ 5
1.1 INTERNATIONAL ELECTRICAL SYMBOLS........................... 5
1.2 DEFINITION OF MEASUREMENT CATEGORIES (CAT)...... 6
1.3 RECEIVING YOUR SHIPMENT................................................ 6
1.4 ORDERING INFORMATION ..................................................... 6
2. PRODUCT FEATURES ..................................................................... 7
2.1 DESCRIPTION ........................................................................... 7
2.2 MR6292 FEATURES.................................................................. 8
3. SPECIFICATIONS .............................................................................. 9
3.1 ELECTRICAL.............................................................................. 9
3.2 MECHANICAL ............................................................................ 9
3.3 ENVIRONMENTAL .................................................................. 10
3.4 SAFETY .................................................................................... 10
4. OPERATION ..................................................................................... 11
4.1 MAKING MEASUREMENTS ................................................... 11
4.2 OPERATION EXAMPLES) ...................................................... 12
5. MAINTENANCE ................................................................................ 13
5.1 CLEANING................................................................................ 13
5.2 REPAIR AND CALIBRATION.................................................. 13
5.3 TECHNICAL ASSISTANCE .................................................... 14
5.4 LIMITED WARRANTY ............................................................. 14
5.4.1 Warranty Repairs ......................................................................... 15
AC/DC Current Probe Model MR6292
5
1. INTRODUCTION
Warning
These safety warnings are provided to ensure the safety of personnel
and proper operation of the instrument.
• Read this instruction manual completely and follow all the safety
information before attempting to use or service this instrument.
• Use caution on any circuit: Potentially high voltages and currents
may be present and may pose a shock hazard.
MR6292. Never exceed the maximum working voltage ratings given.
• Safety is the responsibility of the operator!
• Never open the back of the instrument while connected to any circuit
or input.
• ALWAYS connect the Model MR6292 to the Micro-Ohmmeter Model
6292 instrument before clamping the probe onto the sample under test.
• Always inspect the probe and lead prior to use. Replace any defec-
tive parts immediately.
• NEVER use the Model MR6292 on electrical conductors rated above
600 V.
1.1 INTERNATIONAL ELECTRICAL SYMBOLS
Thank you for purchasing an AEMC®Instruments AC/DC Current Probe Model
MR6292.
For the best results from your instrument and for your safety, you must read
the enclosed operating instructions carefully and comply with the precautions
Symbols:
CAUTION - Risk of Danger! Indicates a WARNING. Whenever this symbol is
present, the operator must refer to the user manual before operation
Indicates a risk of electric shock. The voltage at the parts marked with this
symbol may be dangerous
T
removal from HAZARDOUS LIVE conductors is permitted
Important information to acknowledge
This product complies with the Low Voltage & Electromagnetic Compatibility
European directives (73/23/CEE & 89/336/CEE)
6
AC/DC Current Probe Model MR6292
1.2 DEFINITION OF MEASUREMENT CATEGORIES (CAT)
CAT IV corresponds to measurements performed at the primary electrical
supply (< 1000 V).
Example: primary overcurrent protection devices, ripple control units, and
meters.
CAT III corresponds to measurements performed in the building installation
at the distribution level.
Example: hardwired equipment in xed installation and circuit breakers.
CAT II corresponds to measurements performed on circuits directly
connected to the electrical distribution system.
Example: measurements on household appliances and portable tools.
1.3 RECEIVING YOUR SHIPMENT
Upon receiving your shipment, make sure that the contents are consistent
with the packing list. Notify your distributor of any missing items. If the
and notify your distributor at once with a detailed description of any damage.
Save the damaged packing container to substantiate your claim.
1.4 ORDERING INFORMATION
AC/DC Current Probe Model MR6292
(for use with Micro-Ohmmeter Model 6292 only) ...................... Cat. #2129.86
Includes user manual.
Order Accessories and Replacement Parts Directly Online
Check our Storefront at
www.aemc.com/store
for availability
AC/DC Current Probe Model MR6292
7
2. PRODUCT FEATURES
2.1 DESCRIPTION
The AC/DC Current Probe Model MR6292 is an accessory for the AEMC®
Instruments Micro-Ohmmeter Model 6292. The Model MR6292 probe is
required for using the Model 6292 to take measurements in BSG (both sides
grounded) mode.
The probe is designed to meet the latest safety and performance standards.
The probe’s hook-shaped jaws enable you to “pry” into or “hook” onto cables
(it will accept 2 x 500 MCM) or small bus bars.
contained in the handle. The output of the probe is 10 mV/A. No battery is
The probe has a proportional mV output for direct reading on the Model
6292.
8
AC/DC Current Probe Model MR6292
2.2 MR6292 FEATURES
1
2
3
4
6
5
Ø = 1.18" (30mm)
Cable max.
Ø = 0.95" (24mm)
Dual Cable max.
POWER
600V CAT III
OUTPUT:
50ADC: 10mV/ADC
For use only with
Micro-ohmmeter
Model 6292
AC/DC CURRENT PROBE
MODEL MR6292
1. Jaws
2. Conductor
3. Protective non-slip guard
4. Green light (ON when connected to the Model 6292)
5. Lead, 5 ft (1.5 m)
6. 5-pin XLR connector
AC/DC Current Probe Model MR6292
9
3. SPECIFICATIONS
3.1 ELECTRICAL
Measurement Range: 1 to 50 A
Accuracy: 1 to 50 A: 1.5 % reading ± 0.2 A
Output Signal: 10 mV/A
Load Impedance: > 100 kΩ / 100 pF
Insertion Impedance: 0.39 mΩ@ 50 Hz, 58 mΩ@1000 Hz
Working Voltage: 600 Vrms
Common Mode Voltage: 600 Vrms
Inuence of Adjacent Conductor:
< 10m A/A at 50 Hz at 23 mm from the probe
Inuence of Conductor in Jaw Opening: 0.5 % reading
Power Source: Powered by Micro-Ohmmeter Model 6292
3.2 MECHANICAL
Jaw Opening: 1.2 in (31 mm)
Maximum Cable Diameter: One 1.18 in (30 mm) or two 0.95 in (24 mm) or
two bus bars (1.2 x 0.4) in (31.5 x 10) mm
Dimensions: (8.8 x 3.82 x 1.73) in (224 x 97 x 44) mm
Weight: 15 oz (440 g)
Output: 4-conductor shielded cable with 5-pin XLR connector
Zero Adjustment: Automatic zero by Model 6292
Case Protection: IP30 per IEC 529
Drop Test:
Mechanical Shock: 100 G, test per IEC 68-2-27
Vibration: Test per IEC 68-2-6
Handle: UL 94 V0
Jaws: UL 94 V0
10
AC/DC Current Probe Model MR6292
3.3 ENVIRONMENTAL
Operating Temperature Range: (14 to 131) °F (-10 to +55) °C
Storage Temperature Range: (-40 to 176) °F (-40 to +80) °C
Temperature Inuence: ≤ 300 ° ppm / °K or 1 % / 10 °K
≤ 0.2 A / °K on Zero
Operating Relative Humidity:
(10 to 35) °C: 90 ± 5 % RH (without condensation)
(40 to 55) °C: 70 ± 5 % RH (without condensation)
Humidity Inuence: (10 to 90) % RH @ reference temperature ≤ 0.1 % R
Altitude: Operating: (0 to 2000) m
Non-operating: (0 to 12,000) m
3.4 SAFETY
Electrical:
EN 61010-2-32, 600 V CAT III, Pollution: 2
Electromagnetic Compatibility:
EN 50081-1 Class B
EN 50082-2 Electrostatic discharge IEC 1000-4-2
Fast transients IEC 1000-4-4
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere AEMC instruments Messgerät Handbücher
AEMC instruments
AEMC instruments 403 Bedienungsanleitung
AEMC instruments
AEMC instruments MD305 Bedienungsanleitung
AEMC instruments
AEMC instruments 300-24-2-10 Bedienungsanleitung
AEMC instruments
AEMC instruments MN261 Bedienungsanleitung
AEMC instruments
AEMC instruments JM865A Bedienungsanleitung
AEMC instruments
AEMC instruments 6240 Bedienungsanleitung
AEMC instruments
AEMC instruments CA7027 Bedienungsanleitung
AEMC instruments
AEMC instruments MN312 Bedienungsanleitung
AEMC instruments
AEMC instruments 1035 Bedienungsanleitung
AEMC instruments
AEMC instruments JM835A Bedienungsanleitung
AEMC instruments
AEMC instruments A196-24-BK Bedienungsanleitung
AEMC instruments
AEMC instruments MA194-24-BK Bedienungsanleitung
AEMC instruments
AEMC instruments MN09 Bedienungsanleitung
AEMC instruments
AEMC instruments 1015 Bedienungsanleitung
AEMC instruments
AEMC instruments MN134 Bedienungsanleitung
AEMC instruments
AEMC instruments 6528 Bedienungsanleitung
AEMC instruments
AEMC instruments JM840A Bedienungsanleitung
AEMC instruments
AEMC instruments 6292 Bedienungsanleitung
AEMC instruments
AEMC instruments MN103 Bedienungsanleitung
AEMC instruments
AEMC instruments CA846 Bedienungsanleitung
