Aewin SCB-6971 Bedienungsanleitung
User’s Manual
AEWIN Technologies Co., Ltd Aug, 2006
1
Network Appliance
Model Number SCB-6971
Desktop AMD®Geode®LX800 Network Appliance with four
LAN or three LAN and four switch, Mini PCI
User’s Manual
Version 1.0
User’s Manual
AEWIN Technologies Co., Ltd Aug, 2006
2
© Copyright 2006. All Rights Reserved
User’s Manual Edition 1.0,Aug 2006
This document contains proprietary information protected by copyright. All rights are reserved; no
part of this manual may be reproduced, copied, translated or transmitted in any form or by any means
without prior written permission of the manufacturer.
The content of this document is intended to be accurate and reliable; the original manufacturer assumes
no responsibility for any inaccuracies that may be contained in this manual. The original
manufacturer reserves the right to make improvements to the products described in this manual at any
time without prior notice.
Trademarks
IBM, EGA, VGA, XT/AT, OS/2 and PS/2 are registered trademarks of International business Machine
Corporation
Award is a trademark ofAward Software International, Inc
Intel is a trademark of Intel
RTL is a trademark of Realtek
VIA is a trademark of VIA Technologies, Inc
Microsoft, Windows, Windows NT and MS-DOS are either trademarks or registered trademarks of
Microsoft Corporation
All other product names mentioned herein are used for identification purpose only and may be
trademarks and/or registered trademarks of their respective companies
Limitation of Liability
While reasonable efforts have been made to ensure the accuracy of this document, the manufacturer
and distributor assume no liability resulting from errors or omissions in this document, or from the use
of the information contained herein.
For more information on SCB-6971 or other AEWIN products, please visit our website
http://www.aewin.com.tw.
For technical supports or free catalog, please send your inquiry to
User’s Manual
AEWIN Technologies Co., Ltd Aug, 2006
3
Table of Contents
Chapter 1. General Information.................................................................................4
1.1 Introducing.........................................................................................................4
1.2 Specification ......................................................................................................4
1.3 Order Information..............................................................................................5
1.4 Packaging...........................................................................................................5
1.5 Precautions.........................................................................................................5
1.6 System Layout ...................................................................................................7
1.7 Board Dimension...............................................................................................8
Chapter 2. Connector/Jumper Configuration.........................................................10
2.1 Connector/Jumper Location and Definition.....................................................10
2.2 Connector and Jumper Setting.........................................................................11
Chapter 3 BIOS Setup...............................................................................................17
3.1 Quick Setup......................................................................................................17
3.2 Entering the CMOS Setup Program.................................................................18
3.3 Menu Options...................................................................................................19
3.4 Standard CMOS Features Setup ......................................................................20
3.5 Advanced BIOS Features Setup.......................................................................21
3.6 Advanced Chipset Features Setup....................................................................23
3.7 Integrated Peripherals ......................................................................................23
3.8 PNP/PCI Configuration ...................................................................................25
3.9 PC Health Status Configuration Setup.............................................................26
3.10 Load Optimized Defaults...............................................................................27
3.11 Set User Password..........................................................................................27
3.12 Save and Exit Setup.......................................................................................28
3.13 Exit Without Saving.......................................................................................29
Chapter 4. Utility & Driver Installation...............................................................30
4.1 Operation System Supporting..........................................................................30
4.2 System Driver Installation ...............................................................................30
4.3 VGADriver Installation...................................................................................30
4.4 LAN Driver Installation...................................................................................31
Appendix A: Optional Accessory and Cable List....................................................33
User’s Manual
AEWIN Technologies Co., Ltd Aug, 2006
4
Chapter 1. General Information
1.1 Introducing
The SCB-6971 series is a low cost, low power network appliance. There are
two combinations. One is equipped with four 10/100Mbps LAN ports, the
other is with three 10/100 LAN and four 10/100 switch. Also, the system is
equipped with one RJ45 console port.
It is designed to be a desktop form factor with 10 LED indicators for LAN,
power and storage. Besides, SCB-6971 can support one Mini PCI for
expansion use, one CcompactFlash Type I/II socket for OS installation.
The SCB-6971 series is positioned in SMB/SOHO segment, suitable for
Firewall, VPN, Load Balancing, IPS, IDS application, etc.
1.2 Specification
General Functions
CPU AMD® Geode® LX800
Chipset AMD® Geode® CS5536
Memory One DDR DIMM socket support up to 1GB
Ethernet Four 10/100Mbps PCI bus Ethernet ports utilizing four Realtek®
8139CL+ Ethernet controllers or three 10/100Mbps & four 10/100 switch
I/O Port One RJ45 console port
Expansion Slot One Mini PCI socket
SSD One 50-pin CompactFlashTM type I/II socket
Mechanical and Environmental
LCD Indicator 10 LED indicators for Power/HDD/LAN active & speed
Power Supply 30W +5V DC IN power adapter
OperatingTemperature 32 to 104°F (0 to 40°C)
Storage Temperature -4 to 167°F (-20 to 75°C)
Humidity 5 to 95% relative humidity, non-operating, non-condensing
Dimension（W x D x H）225mm (W) x 152mm (D) x 30mm (H) （8.9” W x 6.0” D x 1.2” H）
Certification CE/FCC
* Note: All specifications are subject to change without prior notice
User’s Manual
AEWIN Technologies Co., Ltd Aug, 2006
5
1.3 Order Information
We offer various combination of SCB-6971 control board according to LAN
difference, it is to meet various need in the market.
Model Description
SCB-6971A-050-A Desktop AMD Geode LX800 Network Appliance with Four 10/100 LAN,
Mini PCI
SCB-6971B-050-B Desktop AMD Geode LX800 Network Appliance with Three 10/100 LAN
and Four 10/100 switch, Mini PCI
MB06018-1-01 Adapter Module of VGA header
46-I0002X6-00 2mm, 20cm cable of MB06018
1.4 Packaging
Please make sure that the following items have been included in the package
before installation.
1. SCB-6971 chassis *1
2. SCB-6971 main board * 1
3. Cables (Optional)
1. CD-ROM that contains the following folders:
(1) Manual
(2) System Driver
(3) Ethernet Driver
(4) Utility Tools
If any item of above is missing or damaged, please contact your dealer or
retailer from whom you purchased the SCB-6971. Keep the box and carton
when you probably ship or store SCB-6971 in near future. After you unpack the
goods, inspect and make sure the packaging is intact. Do not plug the power
adapter to the main board of SCB-6971 if you already find it appears damaged.
Note: Keep the SCB-6971 in the original packaging until you start
installation.
1.5 Precautions
Please make sure you properly ground yourself before handling the SCB-6971
control board or other system components. Electrostatic discharge can be
easily damage the SCB-6971 control board.
User’s Manual
AEWIN Technologies Co., Ltd Aug, 2006
6
Do not remove the anti-static packing until you are ready to install the
SCB-6971 control board.
Ground yourself before removing any system component from it protective
anti-static packaging. To ground yourself, grasp the expansion slot covers or
other unpainted parts of the computer chassis.
Handle the SCB-6971 control board by its edges and avoid touching the
components on it.
User’s Manual
AEWIN Technologies Co., Ltd Aug, 2006
7
1.6 System Layout
SCB-6971A-050-A:
SCB-6971B-050-B:
(Front Side)
(Rear Side)
(Front Side)
(Rear Side)
User’s Manual
AEWIN Technologies Co., Ltd Aug, 2006
8
Board Layout: (SCB-6971B-050-B)
1.7 Board Dimension
SCB-6971A-050-A
Main board
User’s Manual
AEWIN Technologies Co., Ltd Aug, 2006
9
SCB-6971B-050-B
Main board
User’s Manual
AEWIN Technologies Co., Ltd Aug, 2006
10
Chapter 2. Connector/Jumper Configuration
2.1 Connector/Jumper Location and Definition
Inhaltsverzeichnis
Andere Aewin Netzwerk-Hardware Handbücher
Beliebte Netzwerk-Hardware Handbücher anderer Marken
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung
B&B Electronics
B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung
Yudor
Yudor YDS-16 Bedienungsanleitung
D-Link
D-Link ShareCenter DNS-320L Bedienungsanleitung
Samsung
Samsung ES1642dc Gebrauchsanweisung
Honeywell Home
Honeywell Home LTEM-PV Montageanleitung
