Agilent Technologies AIC 5000 Bedienungsanleitung
EZChrom Elite
Agilent Instrument
Controller Installation
Guide
Notices
© Agilent Technologies, Inc. 2006-
2009.
No part of this manual may be
reproduced in any form or by any
means (including electronic storage
and retrieval or translation into a
foreign language) without prior
agreement and written consent from
Agilent Technologies, Inc. as
governed by United States and inter-
national copyright laws.
Manual Part Number
G6783-90003
Edition
Document Revision 3.3.2
March, 2009
Agilent Technologies, Inc.
6612 Owens Dr.
Pleasanton, CA 94588-3334
Warranty
The material contained in this
document is provided “as is,” and is
subject to being changed, without
notice, in future editions. Further, to
the maximum extent permitted by
applicable law, Agilent disclaims all
warranties, either express or
implied, with regard to this manual
and any information contained
herein, including but not limited to
the implied warranties of merchant-
ability and fitness for a particular
purpose. Agilent shall not be liable
for errors or for incidental or
consequential damages in
connection with the furnishing, use,
or performance of this document or
of any information contained herein.
Should Agilent and the user have a
separate written agreement with
warranty terms covering the
material in this document that
conflict with these terms, the
warranty terms in the separate
agreement shall control.
Technology Licenses
The hardware and/or software
described in this document are
furnished under a license and may
be used or copied only in
accordance with such license.
Restricted Rights Legend
If software is for use in the
performance of a U.S. Government
prime contract or subcontract,
Software is delivered and licensed
as "Commercial computer software"
as defined in DFAR 252.227-7014
(June 1995), or as a "commercial
item" as defined in FAR 2.101(a) or
as "Restricted computer software"
as defined in FAR 52.227-19 (June
1987) or any equivalent agency
regulation or contract clause. Use,
duplication or disclosure of Software
is subject to Agilent Technologies’
standard commercial license terms,
and non-DOD Departments and
Agencies of the U.S. Government
will receive no greater than
Restricted Rights as defined in FAR
52.227-19(c)(1-2) (June 1987). U.S.
Government users will receive no
greater than Limited Rights as
defined in FAR 52.227-14 (June
1987) or DFAR 252.227-7015 (b)(2)
(November 1995), as applicable in
any technical data.
AIC Installation and Configuration iii
Contents
1Using This Guide ................................................................................. 1
Introduction ............................................................................................................ 1
Who Should Read This Guide? ...........................................................................1
2About the AIC ...................................................................................... 3
3AIC 5000 Installation and Configuration.......................................... 5
Before You Begin .................................................................................................. 5
AIC 5000 Configuration ........................................................................................ 7
Step 1. Copy EZChrom Elite folders to the USB memory stick............ 7
Step 2. Preliminary setup ........................................................................... 8
Step 3. Set up the IP address on the AIC..............................................10
Step 4. Add the AIC to the domain.........................................................10
Step 5. Add domain user to the AIC local Administrators group......11
Step 6. Run DCOMServerSettings ..........................................................11
Step 7. Add one or more network printers............................................12
Step 8. Change the administrator’s password .....................................13
Step 9. Set time, date, and regional settings........................................13
Step 10. Enable screen lock.....................................................................14
Step 11. Set data system enterprise settings.......................................14
Install an A/D Converter....................................................................................15
Install the SS420x................................................................................................15
Configure the SS420x .........................................................................................16
iv AIC Installation and Configuration
Connect Instruments ..........................................................................................17
Test the AIC..........................................................................................................19
Notes on Using the AIC 5000............................................................................19
4Update Procedure for AIC 5000 .......................................................20
5Replacing an AIC Revision A or Revision B...................................22
AIC 5000 Specifications .....................................................................................23
6AIC Revision B Installation and Configuration..............................26
Before You Begin ................................................................................................26
AIC Revision B Installation................................................................................26
Step 1. Set up the AIC Rev B ....................................................................27
Step 2. Setup the IP address on the AIC Rev B ...................................28
Step 3. Add the AIC Rev B to the domain .............................................28
Step 4. Add a domain user to the AIC local Administrators group ..29
Step 5. Run DCOMServerSettings ..........................................................29
Step 6. Add one or more network printers............................................30
Step 7. Change the administrator’s password .....................................31
Step 8. Set time, date, and regional settings........................................31
Step 9. Enable screen lock .......................................................................31
Step 10. Set data system enterprise settings.......................................32
Install an A/D Converter....................................................................................32
Install the SS420x .......................................................................................33
Configure the SS420x.................................................................................33
Connect Instruments ..........................................................................................34
AIC Installation and Configuration v
Test the AIC..........................................................................................................35
Notes .....................................................................................................................35
7Updating the AIC Rev B Software .................................................. 37
Rev B Specifications...........................................................................................39
8Revision A Installation and Configuration..................................... 40
Before You Begin ................................................................................................40
AIC Configuration Steps.....................................................................................40
Setup the IP Address on the AIC .............................................................41
Add the AIC to the Domain .......................................................................42
Add a Domain User to the AIC Local Administrators Group ..............43
Add One or More Network Printers ........................................................45
Changing the Administrator’s Password................................................45
Setting Time, Date, and Regional Settings ............................................46
Enable Screen Lock ....................................................................................46
Data System Enterprise Settings .............................................................46
Configure the SS420x .........................................................................................47
Testing the AIC ....................................................................................................49
Updating the AIC Image .....................................................................................50
Update Procedure................................................................................................51
Notes .....................................................................................................................53
Rev A Specifications...........................................................................................53
9Using VNC for Troubleshooting....................................................... 56
AIC 5000 Installation and Configuration 1
1Using This Guide
Introduction
Use this guide to learn how to install and configure the Agilent
Instrument Controller (AIC) for use with the EZChrom Elite data
system. The AIC is a network appliance that controls instruments
and acquires data digitally. Be sure to refer to the section of this
guide that corresponds with the AIC version you have. See the next
chapter, “About the Agilent Instrument Controller”, for details.
Who Should Read This Guide?
This document is designed for the system administrator who will
install the AIC.
AIC 5000 Installation and Configuration 3
2About the AIC
The AIC is a device that controls instruments and acquires data
digitally. It is for use in client/server environments only. Each AIC
can control and acquire digital data from up to 4 GC or LC
instruments, or up to 16 analog channels of data (A/D required), up
to 2 photodiode array detectors (PDA) or combinations of the
above.
Please see the Agilent Technologies Website www.Agilent.com and
browse for Technical Support for Life Sciences and Chemical
Analysis for information on EZChrom Elite software version
support for AICs.
Note
There are three versions of the AIC: The
AIC 5000 is black in color and has
“Instrument Controller 5000”stenciled on
the front of the unit. Revision B is silver
in color and is marked with a “Revision
B” sticker on the rear. Revision A has
limited instrument support for versions
after EZChrom Elite Revision 3.2.1. It is
black in color and is marked with a
“Revision A” sticker on the rear or has no
sticker. AIC Rev A is not covered in this
document.
Note
The AIC is shipped with a USB memory
stick, which is required for software
installation and updates. Please keep this
in a safe place for future use.
Inhaltsverzeichnis
Andere Agilent Technologies Controller Handbücher
Agilent Technologies
Agilent Technologies M9405A Handbuch
Agilent Technologies
Agilent Technologies X3501-64003 Bedienungsanleitung
Agilent Technologies
Agilent Technologies 929-0196 Bedienungsanleitung
Agilent Technologies
Agilent Technologies Turbo-V 1000HT Bedienungsanleitung
Agilent Technologies
Agilent Technologies Turbo-V 550 Bedienungsanleitung
Agilent Technologies
Agilent Technologies ETC 60 Bedienungsanleitung
Agilent Technologies
Agilent Technologies TwisTorr Medium-TMP X3501-64016 Bedienungsanleitung
Agilent Technologies
Agilent Technologies 929-0022 Bedienungsanleitung
Agilent Technologies
Agilent Technologies RS-232 Bedienungsanleitung
Agilent Technologies
Agilent Technologies TwisTorr Medium-TMP Rack Bedienungsanleitung
Agilent Technologies
Agilent Technologies G2743A Bedienungsanleitung
Agilent Technologies
Agilent Technologies Eyesys Mini-B/A Bedienungsanleitung
Agilent Technologies
Agilent Technologies 11896A Handbuch
Agilent Technologies
Agilent Technologies TwisTorr 74 FS Bedienungsanleitung
Agilent Technologies
Agilent Technologies Turbo-V 2000HT Bedienungsanleitung
Agilent Technologies
Agilent Technologies 969-9871 Bedienungsanleitung
Agilent Technologies
Agilent Technologies XGS-600 Bedienungsanleitung
Agilent Technologies
Agilent Technologies Multiple Channel Controller 85330A Service-Handbuch
Agilent Technologies
Agilent Technologies 4UHV Bedienungsanleitung
Agilent Technologies
Agilent Technologies TwisTorr 74 FS PCB 24 Bedienungsanleitung
