Agilent Technologies 2100 Bioanalyzer System Installations- und Betriebsanleitung
Agilent Technologies
Agilent 2100 Bioanalyzer
System
Installation and Safety Guide
Notices
© Agilent Technologies, Inc. 1999-2018
No part of this manual may be reproduced
in any form or by any means (including
electronic storage and retrieval or transla-
tion into a foreign language) without prior
agreement and written consent from Agi-
lent Technologies, Inc. as governed by
United States and international copyright
laws.
Manual Part Number
G2938-90016 Rev. B
Edition
01/2018
Printed in Germany
Agilent Technologies
Hewlett-Packard-Strasse 8
76337 Waldbronn
Warranty
The material contained in this docu-
ment is provided “as is,” and is sub-
ject to being changed, without notice,
in future editions. Further, to the max-
imum extent permitted by applicable
law, Agilent disclaims all warranties,
either express or implied, with regard
to this manual and any information
contained herein, including but not
limited to the implied warranties of
merchantability and fitness for a par-
ticular purpose. Agilent shall not be
liable for errors or for incidental or
consequential damages in connection
with the furnishing, use, or perfor-
mance of this document or of any
information contained herein. Should
Agilent and the user have a separate
written agreement with warranty
terms covering the material in this
document that conflict with these
terms, the warranty terms in the sep-
arate agreement shall control.
Technology Licenses
The hardware and/or software described in
this document are furnished under a
license and may be used or copied only in
accordance with the terms of such license.
Restricted Rights Legend
If software is for use in the performance of
a U.S. Government prime contract or sub-
contract, Software is delivered and licensed
as “Commercial computer software” as
defined in DFAR 252.227-7014 (June 1995),
or as a “commercial item” as defined in
FAR 2.101(a) or as “Restricted computer
software” as defined in FAR 52.227-19
(June 1987) or any equivalent agency regu-
lation or contract clause. Use, duplication
or disclosure of Software is subject to Agi-
lent Technologies’ standard commercial
license terms, and non-DOD Departments
and Agencies of the U.S. Government will
receive no greater than Restricted Rights as
defined in FAR 52.227-19(c)(1-2) (June
1987). U.S. Government users will receive
no greater than Limited Rights as defined in
FAR 52.227-14 (June 1987) or DFAR
252.227-7015 (b)(2) (November 1995), as
applicable in any technical data.
Safety Notices
CAUTION
A CAUTION notice denotes a
hazard. It calls attention to an
operating procedure, practice, or
the like that, if not correctly per-
formed or adhered to, could
result in damage to the product
or loss of important data. Do not
proceed beyond a CAUTION
notice until the indicated condi-
tions are fully understood and
met.
WARNING
A WARNING notice denotes a
hazard. It calls attention to an
operating procedure, practice,
or the like that, if not correctly
performed or adhered to, could
result in personal injury or
death. Do not proceed beyond a
WARNING notice until the indi-
cated conditions are fully
understood and met.
For Research Use Only
Not for use in diagnostic procedures
3
Contents
Contents
1 Safety Information 5
Power Cords 7
Operation 8
Safety Symbols 9
Laser Safety 10
Chemical and Biological Safety 11
Legal Notice 13
2 Site Requirements for the 2100 Bioanalyzer Instrument 65
Power Considerations 66
Bench space 67
Environment 68
Sound Emission 69
The Waste Electrical and Electronic Equipment (WEEE) directive 70
Physical Specifications of the 2100 Bioanalyzer Instrument 71
3 Unpacking the 2100 Bioanalyzer System 73
Damaged Packaging 74
4 Installing the 2100 Bioanalyzer System 77
Setting up your PC 78
Setting up the 2100 Bioanalyzer Instrument 79
5
Agilent Technologies
1
Safety Information
Power Cords 7
Operation 8
Safety Symbols 9
Laser Safety 10
Chemical and Biological Safety 11
Legal Notice 13
The following general safety precautions must be observed during all phases of
operation, service, and repair of the Agilent 2100 Bioanalyzer instrument.
All safety instructions should be read and understood before installation,
operation and maintenance of the instrument. Failure to comply with these
precautions or with specific warnings elsewhere in this manual violates safety
standards of design, manufacture and intended use of the instrument.
Agilent Technologies assumes no liability for the customer’s failure to comply
with these requirements.
WARNING
A WARNING notice denotes a hazard.
It calls attention to an operating procedure, practice, or the like that, if not correctly
performed or adhered to, could result in personal injury or death.
➔Do not proceed beyond a WARNING notice until the indicated conditions are fully
understood and met.
6
1
Safety Information
CAUTION
A CAUTION notice denotes a hazard.
It calls attention to an operating procedure, practice, or the like that, if not correctly
performed or adhered to, could result in damage to the product or loss of important
data.
➔Do not proceed beyond a CAUTION notice until the indicated conditions are fully
understood and met.
NOTE
Instrument Safety: This is a Safety Class I instrument (provided with a terminal for
protective grounding) and has been manufactured and tested according to international
safety standards.
7
Safety Information
1
Power Cords
Power Cords
Different power cords are offered as options with the Agilent 2100 Bioanalyzer
instrument. The female end of all power cords is identical. It plugs into the
power-input socket at the rear of the instrument. The male end of each power
cord is different and designed to match the wall socket of a particular country
or region.
WARNING
Electric Shock
The absence of ground connection and the use of an unspecified power cord can
lead to electric shock or short circuit.
➔Never operate your instrument from a power outlet that has no ground connection.
➔Never use a power cord other than the Agilent Technologies power cord designed
for your region.
➔Never use cables other than those supplied by Agilent Technologies to ensure
proper functionality and compliance with safety or EMC regulations.
8
1
Safety Information
Operation
Operation
Before the instrument is switched on, all protective ground terminals,
extension cords, auto-transformers, and devices connected to it must be
connected to a protective ground socket. Any interruption of the protective
grounding will cause a potential shock hazard that could result in serious
personal injury. Whenever it is likely that the protection has been impaired,
the instrument must be made inoperative and be secured against any intended
operation.
To operate the instrument safely:
•Do not remove any cover of the Agilent 2100 Bioanalyzer instrument.
•Avoid any maintenance of the instrument under voltage.
•Do not let liquid drip into the instrument. It could cause a shock or it could
damage the instrument.
•Do not replace components of the instruments (e.g. electrode cartridge)
with power turned on.
•Do not operate the instrument in the presence of flammable gases or fumes.
Operation of any electrical instrument in such an environment constitutes a
definite safety hazard.
•Do not install substitute parts or make any unauthorized modification to
the instrument.
WARNING
Ensure the proper usage of the equipment
The protection provided by the equipment may be impaired.
➔The operator of this instrument is advised to use the equipment in a manner as
specified in this manual.
9
Safety Information
1
Safety Symbols
Safety Symbols
Symbol Description
Electrosensitive device.
The apparatus is marked with this symbol when the user should refer to the Installation and Safety
Manual in order to prevent risk of harm to the operator and to protect the apparatus against damage.
Indicates dangerous voltages.
Indicates a protected ground terminal.
Laser Radiation. When open avoid exposure to beam.
10
1
Safety Information
Laser Safety
Laser Safety
The Agilent 2100 Bioanalyzer instrument is classified as a "Laser Class 1"
product (IEC825-1, CFR1040.10). During normal operation of the instrument,
no laser light is accessible to the user.
When the laser is in use, the laser light source emits light at a power that may
be harmful to the eyes. To prevent operator exposure to potentially harmful
laser light, an interlock mechanism turns off the laser whenever the lid of the
Agilent 2100 Bioanalyzer instrument is not closed. Furthermore, the lid can't
be completely opened and has a black light absorbing surface in order to
prevent any potential laser light reflection.
WARNING
Harmful laser light
The laser light source emits light at a power that may be harmful to the eyes.
➔Never look into the beam or direct it towards someone else.
➔System interlocks should never be disabled.
Andere Handbücher für 2100 Bioanalyzer System
3
Inhaltsverzeichnis
Sprachen:
Andere Agilent Technologies Messgerät Handbücher
Agilent Technologies
Agilent Technologies u8903a Bedienungsanleitung
Agilent Technologies
Agilent Technologies 8504B Bedienungsanleitung
Agilent Technologies
Agilent Technologies 2100 Bioanalyzer System Installations- und Betriebsanleitung
Agilent Technologies
Agilent Technologies E5071C ENA Series Bedienungsanleitung
Agilent Technologies
Agilent Technologies 89410A Bedienungsanleitung
Agilent Technologies
Agilent Technologies Agilent 4396B Bedienungsanleitung
Agilent Technologies
Agilent Technologies PSA Series Kurzanleitung
Agilent Technologies
Agilent Technologies 8510C Bedienungsanleitung
Agilent Technologies
Agilent Technologies E5406A-Pro Series Bedienungsanleitung
Agilent Technologies
Agilent Technologies B1500A Installationsanleitung
Agilent Technologies
Agilent Technologies ESA-E Series Handbuch
Agilent Technologies
Agilent Technologies E8362A Bedienungsanleitung
Agilent Technologies
Agilent Technologies 86122A Bedienungsanleitung
Agilent Technologies
Agilent Technologies PSA Series Installations- und Betriebshandbuch
Agilent Technologies
Agilent Technologies 87075C Option H08 Handbuch
Agilent Technologies
Agilent Technologies 8504B Bedienungsanleitung
Agilent Technologies
Agilent Technologies PSA Series Betriebsanleitung
Agilent Technologies
Agilent Technologies 8753ET Bedienungsanleitung
Agilent Technologies
Agilent Technologies PNA Series Bedienungsanleitung
Agilent Technologies
Agilent Technologies J3919A Bedienungsanleitung
