Agilent Technologies 4294A Bedienungsanleitung

Agilent 4294A Precision

Impedance Analyzer,

40 Hz to 110 MHz

Conﬁguration Guide

Advanced Test Equipment Rentals

www.atecorp.com 800-404-ATEC (2832)

Ordering Guide

The following steps will guide you through conﬁguring your 4294A.

Standard Furnished Item

Description Additional Information

CD-ROM Manual Contains Operation and Programming manuals in PDF. See documentation option

for printed manuals.

100 ohm resistor 100 Ω load resistor module for 4-terminal pair extension. See Available Accessories

(General/Miscellaneous Measurement Accessories) for additional information.

Power Cable

Certiﬁcate of Calibration

Note: The following are not furnished: Printed copies of Operation Manual, Programming Manual, I-Basic User’s Handbook, Test Fixture and Keyboard.

Refer to Accessory Option, Documentation Option and Available Accessories for the selection of these items.

Step 1. Choose Hardware Option (Mandatory)

Description Option No. Requires Not

Compatible Additional Information

Standard Frequency Reference 4294A-800 None 4294A-1D5 Standard Frequency Reference

is installed.

High Stability Frequency

Reference

4294A-1D5 None 4294A-800 This option improves the frequency

accuracy and stability of the 4294A.

BNC Adapter is supplied with 4294A-1D5.

Bottom Feet 4294A-801 None 4294A-802 Includes Bottom Feet

No Bottom Feet 4294A-802 None 4294A-801 No Bottom Feet

Note: Refer to Hardware Upgrade for retroﬁt information on the above options.

Step 2. Choose Accessory Option (If not required, go to Step 3)

Description Option No. Requires Not

Compatible Additional Information

Rackmount Kit 4294A-1CM None 4294A-1CP Adds Rackmount kit

Front Handle Kit 4294A-1CN None 4294A-1CP Adds Front Handle kit

Handle/Rackmount Kit 4294A-1CP None 4294A-1CM

4294A-1CN

Adds Handle/Rackmount kit

Keyboard 4294A-810 None None Adds Keyboard

Note: Refer to Hardware Upgrade for retroﬁt information on the above options.

Step 3. Choose Documentation Option (If not required, go to Step 4)

Description Option No. Additional Information

U.S. - English Localization 4294A-ABA Printed manuals. 4294A-ABA/ABJ contains the Operation Manual,

Programming Manual, I-Basic User’s Handbook and Sample Program Disk.

Japan - Japanese Localization 4294A-ABJ

Service Manual 4294A-0BW Printed copy of service manual

Step 4. Choose Calibration Certiﬁcate Option (If not required, go to Step 5)

Description Option No. Additional Information

ISO 17025 compliant

calibration

4294A-1A7 ISO 17025 compliant calibration

ANSI Z540 Compliant Calibration

4294A-A6J ANSI Z540 compliant calibration

Step 5. Choose Warranty Plan

1-year Return-to-Agilent Warranty and Service Plan are standard. For extended warranty options and additional

information, contact your local Agilent sales ofﬁce or visit the Agilent home website.

Hardware Upgrade

Option No. Description

Upgrade

Model No. or

Equivalent Part

Number

Customer

Installable

Requires

(Instrument

must already

include the

following)

Not

Compatible

Additional

Information

4294A-1D5 High Stability

Frequency

Reference

4294U-1D5 No 4294A-800 None Installable at

service center

only

4294A-801 Bottom Feet 5041-9167

1460-1345

5021-2840

5041-9173

Yes 4294A-802 None Required Qty 4

Required Qty 2

Required Qty 4

Required Qty 2

4294A-1CM Rackmount Kit 5063-9216 Yes None 4294A-1CP

4294A-1CN Front Handle Kit 5063-9229 Yes None 4294A-1CP

4294A-1CP Handle/

Rackmount Kit

5188-4430 Yes None 4294A-1CM

4294A-1CN

4294A-810 Keyboard

(Mini-DIN)

1150-7970 Yes None None

Available Accessories – General/Miscellaneous Measurement Accessories

Description Model Number

Requires

(Instrument

must already

include the

following)

Additional Information

Impedance Probe Kit 42941A None 40 Hz-110 MHz Impedance Probe Kit. Contains Pin Probe,

Spare Pin Set, BNC-SMB Adapter, 3.5 mm Short and Load

terminations, clip lead, grounding lead, carrying case and

Operation and Service manual.

42941A-ABA None U.S. – English localization

42941A-ABJ None Japan – Japanese localization

4-Terminal to 7 mm

Terminal Adapter

42942A None 40 Hz – 110 MHz Terminal Adapter for using RF

component test ﬁxtures such as the 16092A, 16192A,

16194A, 16196A/B/C/D and 16197A. Operation Note

is furnished.

42942A-700 None Adds 7 mm open/short/load terminations set

42942A-ABA None U.S. – English localization

42942A-ABJ None Japan – Japanese localization

Test Leads 16048G None 1 m BNC connector leads. DC – 110 MHz. Usable with the

4294A only.

16048G-001 None Adds BNC Bracket

16048G-ABA None U.S. – English localization

16048G-ABJ None Japan – Japanese localization

Description Model Number

Requires

(Instrument

must already

include the

following)

Additional Information

Test Leads 16048H None 2 m BNC connector leads. DC – 110 MHz. Usable with the

4294A only

16048H-001 None Adds BNC Bracket

16048H-ABA None U.S. - English localization

16048H-ABJ None Japan – Japanese localization

SMD Test Fixture 16034E None For SMD; (0.1 to 8)L x (0.5 to 10)W x (0.5 to 10)H mm.

DC – 40 MHz. Operation and Service Manual is furnished.

SMD Test Fixture 16034G None For SMD; (0.1 to 5)L x (0.3 to 1.6)W x (0.3 to 1.6)H mm.

DC - 110 MHz. 100 Ω SMD resistors set is furnished.

16034G-ABA None U.S. - English localization

16034G-ABJ None Japan – Japanese localization

SMD Test Fixture 16034H None For Array-type SMD; (0.1 to 5)L x (≤ 15)W x (0.6 to 3)H mm.

DC – 110 MHz. 100 Ω SMD resistors set and Operation

Manual are furnished.

SMD Test Fixture 16044A None Kelvin contact test ﬁxture for SMD; (1.6 to 8)L x (0.8 to

8)W x (0.8 to 3)H mm. DC – 10 MHz.

16044A-ABA None U.S. – English localization

16044A-ABJ None Japan – Japanese localization

Test Fixture 16047A None For axial or radial lead device. DC – 13 MHz. Operation

and Service Manual is furnished.

16047A-701 None Adds Shorting plate

Test Fixture 16047D None For axial or radial lead device. DC – 40 MHz. Operation

and Service Manual is furnished.

16047D-701 None Adds Shorting plate

Test Fixture 16047E None For axial or radial lead device. DC – 110 MHz.

16047E-ABA None U.S. – English localization

16047E-ABJ None Japan – Japanese localization

Tweezers Test Fixture 16334A None For SMD; ≤ 10 mm L. Tweezers type; cable length 1 m.

DC – 15 MHz. Shorting block and Operation and Service

Manual are furnished.

Kelvin Clip Leads 16089A None 2 large clips. 5 Hz – 100 kHz. Choose mandatory option

16089A-800 or C20. Operation and Service Manual is

furnished.

16089A-800 None Cable length: 1 m (standard)

16089A-C20 None Cable length: 2 m

Kelvin Clip Leads 16089B None 2 medium clips. 5 Hz – 100 kHz. Choose mandatory option

16089B-800 or C20. Operation and Service Manual is

furnished.

16089B-800 None Cable length: 1 m (standard)

16089B-C20 None Cable length: 2 m

Available Accessories –General/Miscellaneous Measurement Accessories – continued

Description Model Number

Requires

(Instrument

must already

include the

following)

Additional Information

Kelvin IC Clip Leads 16089C None 2 IC clips; cable length 1 m. 5 Hz – 100 kHz. Operation and

Service Manual is furnished.

Alligator Clip Leads 16089D None 4 medium clips; cable length 1 m. 5 Hz – 100 kHz.

Operation and Service Manual is furnished.

Kelvin Clip Leads 16089E None 2 large clips; cable length 1 m. 5 Hz – 100 kHz. Operation

Note is furnished.

External Voltage Bias

Fixture

16065A None ± 200 V dc max., for axial or radial lead device.

50 Hz – 2 MHz. Shorting plate and Operation and Service

Manual are furnished.

Dielectric Test Fixture 16451B None Test ﬁxture for measuring permittivity of dry solid sheet

material; Cable length 1 m. DC – 30 MHz. 38 mm and 5 mm

diameter electrodes for measuring bare material and two

types of electrodes for measuring material with

pre-formed electrodes are furnished.

16451B-ABA None U.S. - English localization

16451B-ABJ None Japan – Japanese localization

Liquid Test Fixture 16452A None

(16048G and

four of 1250-

0216 BNC(m)

to BNC(m)

adapters)

Test ﬁxture for measuring permittivity of liquid material.

20 Hz – 30 MHz. Required volume of material; 3.4, 3.8, 4.8

or 6.8 ml. Temperature range: –20 ° to +125 °C. Shorting

plate, spacers, SMA-BNC adapters, ﬁxture stand, carrying

case and Operation and Service Manual are furnished.

Test Leads 16452-61601 None Heat-proof test leads for use with the 16452A.

Temperature range: –20 ° to +125 °C

3-Terminal SMD Test

Fixture

16043-60011 None Equivalent to previous 16043A. DC – 110 MHz. For related

options and accessories, see Note below this table.

3-Terminal SMD Test

Fixture

16043-60012 None Equivalent to previous 16043B. DC – 110 MHz. For related

options and accessories, see Note below this table.

Balanced/

Unbalanced 4-

Terminal Converter

16314-60011 None Equivalent to previous 16314A; Unbalanced 50 Ω to

balanced 50 Ω converter for measuring balanced device or

circuit. 100 Hz – 10 MHz. Shorting bar and 50 Ω resistor

for Short/Load compensation and Operation and Service

Manual are furnished.

100 Ω Resistor 04294-61001 None 100 Ω load resistor module for 4-terminal pair extension.

Furnished with the 4294A.

Sample Program Disk 04294-18040 None Contains sample programs in 3.5 inch disk. Furnished

with 4294A-ABA/ABJ.

BNC Adapter 1250-1859 4294A-1D5 BNC adapter for 4294A-1D5

Note: For more detailed information, refer to Accessories Selection Guide for Impedance Measurements.

Available Accessories –General/Miscellaneous Measurement Accessories – continued

Available Accessories – for Calibration and Maintenance

Description Model Number

Requires

(Instrument

must already

include the

following)

Additional Information

Open Termination 42090A None 4-terminal pair Open termination. Required for

performing calibration.

Short Termination 42091A None 4-terminal pair Short termination. Required for

performing calibration.

4-Terminal Pair Standard

Capacitor Set

16380A None 1 pF, 10 pF, 100 pF and 1000 pF standard capacitor set

with carrying case. Calibration report and Operation

Note are furnished.

4-Terminal Pair Standard

Capacitor Set

16380C None 0.01 μF, 0.1 μF and 1 μF standard capacitor set with

carrying case. Calibration report and Operation Note

are furnished.

16380C-001 None Adds 10 μF standard capacitor.

4-Terminal Pair Standard

Resistor Set

42030A None 9 standard resistors from 1 mΩ to 100 kΩ in decade

steps; Carrying case, calibration report and Operation

and Service Manual are furnished.

Performance Test Kit 16190A None Contains 7 mm Open, Short, 50 Ω Load terminations,

calibrated air-line, wrench, calibration data diskette,

carrying case and Operation Note.

4 Terminal Pair to BNC

Interface Box

04294-61002 None Terminal Adapter for test signal and DC bias

performance tests

Note: For more detailed information, refer to Accessories Selection Guide for Impedance Measurements

Literature Resource

Title Publication Number Additional Information

4294A Data Sheet 5968-3809E

4294A Brochure 5968-3808E

LCR Meters, Impedance Analyzers and

Test Fixtures Selection Guide

5952-1430E

Accessories Selection Guide For

Impedance Measurements

5965-4792E

Impedance Measurement Handbook 5950-3000

Note: More literature is available on the Agilent home website.

Web Resource

Have access to the following website to acquire the latest news, product and support information, application literature and more.

www.agilent.com/find/impedance

Remove all doubt

Our repair and calibration services

will get your equipment back to you,

performing like new, when prom-

ised. You will get full value out of

your Agilent equipment through-

out its lifetime. Your equipment

will be serviced by Agilent-trained

technicians using the latest factory

calibration procedures, automated

repair diagnostics and genuine parts.

You will always have the utmost

confidence in your measurements.

For information regarding self main-

tenance of this product, please

contact your Agilent office.

Agilent offers a wide range of ad-

ditional expert test and measure-

ment services for your equipment,

including initial start-up assistance,

onsite education and training, as

well as design, system integration,

and project management.

For more information on repair and

calibration services, go to:

www.agilent.com/find/removealldoubt

www.agilent.com/find/emailupdates

Get the latest information on the

products and applications you select.

For more information on Agilent Technol-

ogies’ products, applications or services,

please contact your local Agilent office.

The complete list is available at:

www.agilent.com/find/contactus

Americas

Canada (877) 894-4414

Latin America 305 269 7500

United States (800) 829-4444

Asia Pacific

Australia 1 800 629 485

China 800 810 0189

Hong Kong 800 938 693

India 1 800 112 929

Japan 0120 (421) 345

Korea 080 769 0800

Malaysia 1 800 888 848

Singapore 1 800 375 8100

Taiwan 0800 047 866

Thailand 1 800 226 008

Europe & Middle East

Austria 01 36027 71571

Belgium 32 (0) 2 404 93 40

Denmark 45 70 13 15 15

Finland 358 (0) 10 855 2100

France 0825 010 700*

*0.125 €/minute

Germany 07031 464 6333

Ireland 1890 924 204

Israel 972-3-9288-504/544

Italy 39 02 92 60 8484

Netherlands 31 (0) 20 547 2111

Spain 34 (91) 631 3300

Sweden 0200-88 22 55

Switzerland 0800 80 53 53

United Kingdom 44 (0) 118 9276201

Other European Countries:

www.agilent.com/find/contactus

Revised: October 6, 2008

Printed in USA, April 10, 2009

5989-8318EN

Product specifications and descriptions

in this document subject to change

without notice.

www.agilent.com

Andere Handbücher für 4294A

Inhaltsverzeichnis

Andere Agilent Technologies Messgerät Handbücher

Agilent Technologies

Agilent Technologies E4991A Bedienungsanleitung

Agilent Technologies

Agilent Technologies 4352B Bedienungsanleitung

Agilent Technologies

Agilent Technologies U1701A Bedienungsanleitung

Agilent Technologies

Agilent Technologies E4440AU Installations- und Betriebshandbuch

Agilent Technologies

Agilent Technologies ESA-E E4407B Installations- und Betriebshandbuch

Agilent Technologies

Agilent Technologies 16850 Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies Agilent 4396B Bedienungsanleitung

Agilent Technologies

Agilent Technologies N8262A P Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies WireScope 350 Bedienungsanleitung

Agilent Technologies

Agilent Technologies 7820A Benutzerhandbuch

Agilent Technologies

Agilent Technologies B2901 Bedienungsanleitung

Agilent Technologies

Agilent Technologies PSA Series Installations- und Betriebshandbuch

Agilent Technologies

Agilent Technologies E8356A Installations- und Betriebshandbuch

Agilent Technologies

Agilent Technologies ENA Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies Varian MERCURY Series Technisches Handbuch

Agilent Technologies

Agilent Technologies E444xAU Option H37 Bedienungsanleitung

Agilent Technologies

Agilent Technologies 8564EC Bedienungsanleitung

Agilent Technologies

Agilent Technologies Cary 60 Bedienungsanleitung

Agilent Technologies

Agilent Technologies 4339B Bedienungsanleitung

Agilent Technologies

Agilent Technologies 5062-8218 Installations- und Betriebshandbuch

Agilent Technologies

Agilent Technologies 34952a Bedienungsanleitung

Agilent Technologies

Agilent Technologies E5900B Bedienungsanleitung

Agilent Technologies

Agilent Technologies 35670A Handbuch

Agilent Technologies

Agilent Technologies 7890 Series Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung