Agilent Technologies U3606B Bedienungsanleitung

Agilent Technologies

Agilent U3606B

Multimeter|DC Power

Supply

Service Guide

II U3606B Service Guide

Notices

No part of this manual may be reproduced in

any form or by any means (including elec-

tronic storage and retrieval or translation

into a foreign language) without prior agree-

ment and written consent from Agilent

Technologies, Inc. as governed by United

States and international copyright laws.

Manual Part Number

U3606-90069

Edition

Second Edition, December 23, 2013

Agilent Technologies, Inc.

5301 Stevens Creek Blvd.

Santa Clara, CA 95051 USA

Warranty

The material contained in this document is

provided “as is,” and is subject to change,

without notice, in future editions. Further,

to the maximum extent permitted by the

applicable law, Agilent disclaims all war-

ranties, either express or implied, with

regard to this manual and any information

contained herein, including but not limited

to the implied warranties of merchantabil-

ity and fitness for a particular purpose.

Agilent shall not be liable for errors or for

incidental or consequential damages in

connection with the furnishing, use, or

performance of this document or of any

information contained herein. Should Agi-

lent and the user have a separate written

agreement with warranty terms covering

the material in this document that conflict

with these terms, the warranty terms in

the separate agreement shall control.

Technology Licenses

The hardware and or software described in

this document are furnished under a license

and may be used or copied only in accor-

dance with the terms of such license.

Restricted Rights Legend

U.S. Government Restricted Rights. Soft-

ware and technical data rights granted to

the federal government include only those

rights customarily provided to end user cus-

tomers. Agilent provides this customary

commercial license in Software and techni-

cal data pursuant to FAR 12.211 (Technical

Data) and 12.212 (Computer Software) and,

for the Department of Defense, DFARS

252.227-7015 (Technical Data - Commercial

Items) and DFARS 227.7202-3 (Rights in

Commercial Computer Software or Com-

puter Software Documentation).

Safety Notices

CAUTION

A CAUTION notice denotes a haz-

ard. It calls attention to an operat-

ing procedure, practice, or the likes

of that, if not correctly performed

or adhered to, could result in dam-

age to the product or loss of impor-

tant data. Do not proceed beyond a

CAUTION notice until the indicated

conditions are fully understood and

met.

WARNING

A WARNING notice denotes a

hazard. It calls attention to an

operating procedure, practice, or

the likes of that, if not correctly

performed or adhered to, could

result in personal injury or death.

Do not proceed beyond a WARN-

ING notice until the indicated

conditions are fully understood

and met.

U3606B Service Guide III

Safety Symbols

The following symbols on the instrument and in the documentation

indicate precautions which must be taken to maintain safe operation of

the instrument.

Direct current (DC) Off (supply)

Alternating current (AC) On (supply)

Both direct and alternating current Caution, risk of danger (refer to this manual

for specific Warning or Caution information)

Earth (ground) terminal Out position of a bi-stable push control

Frame or chassis terminal In position of a bi-stable push control

Category II 300 V over voltage protection

CAT II

300 V

IV U3606B Service Guide

Safety Considerations

Read the information below before using this instrument.

The following general safety precautions must be observed during all

phases of operation, service, and repair of this instrument. Failure to

comply with these precautions or with specific warnings elsewhere in this

manual violates safety standards for design, manufacture, and intended

use of the instrument. Agilent Technologies assumes no liability for the

customer’s failure to comply with these requirements.

WARNING

• Do not use the device if it is damaged. Before you use the device,

inspect the casing. Look for cracks or missing plastic. Do not

operate the device around explosive gas, vapor, or dust.

• Always use the device with the cables provided.

• Observe all markings on the device before establishing any

connection.

• Turn off the device and application system power before

connecting to the I/O terminals.

• When servicing the device, use only the specified replacement

parts.

• Do not operate the device with the cover removed or loosened.

• Use only the power adapter provided by the manufacturer to avoid

any unexpected hazards.

CAUTION

•If the device is used in a manner not specified by the manufacturer,

the device protection may be impaired.

•Always use dry cloth to clean the device. Do not use ethyl alcohol or

any other volatile liquid to clean the device.

•Do not permit any blockage of the ventilation holes of the device.

U3606B Service Guide V

Environmental Conditions

This instrument is designed for indoor use and in an area with low

condensation. The table below shows the general environmental

requirements for this instrument.

Environmental condition Requirement

Temperature

• Operating condition

• 0 °C to 55 °C

• Storage condition

• –40 °C to 70 °C

Humidity

• Operating condition

• Up to 80% RH at 40 °C (non-condensing)

• Storage condition

• Up to 95% RH at 40 °C (non-condensing)

Altitude Up to 2000 m

Pollution degree 2

NOTE

The U3606B complies with the following safety and EMC compliances:

Safety compliance

•IEC 61010-1:2001/EN 61010-1:2001 (2nd Edition)

•Canada: CAN/CSA-C22.2 No. 61010-1-04

•USA: ANSI/UL 61010-1:2004

EMC compliance

•IEC 61326-1:2005/EN61326-1:2006

•CISPR11:2003/EN55011:2007, Group 1 Class A

•Canada: ICES/NMB-001:Issue 4, June 2006

•Australia/New Zealand: AS/NZS CISPR 11:2004

VI U3606B Service Guide

Regulatory Markings

The CE mark is a registered trademark

of the European Community. This CE

mark shows that the product complies

with all the relevant European Legal

Directives.

The C-tick mark is a registered

trademark of the Spectrum

Management Agency of Australia. This

signifies compliance with

the Australia EMC Framework

regulations under the terms of the

Radio Communication Act of 1992.

ICES/NMB-001 indicates that this ISM

device complies with the Canadian

ICES-001.

Cet appareil ISM est confomre a la

norme NMB-001 du Canada.

This instrument complies with the

WEEE Directive (2002/96/EC) marking

requirement. This affixed product label

indicates that you must not discard

this electrical or electronic product in

domestic household waste.

The CSA mark is a registered

trademark of the Canadian Standards

Association.

This symbol indicates the time period

during which no hazardous or toxic

substance elements are expected to

leak or deteriorate during normal use.

Forty years is the expected useful life

of the product.

U3606B Service Guide VII

Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC

This instrument complies with the WEEE Directive (2002/96/EC) marking

requirement. This affixed product label indicates that you must not discard

this electrical or electronic product in domestic household waste.

Product Category:

With reference to the equipment types in the WEEE directive Annex 1, this

instrument is classified as a “Monitoring and Control Instrument” product.

The affixed product label is as shown below.

Do not dispose in domestic household waste.

To return this unwanted instrument, contact your nearest Agilent Service

Center, or visit

www.agilent.com/environment/product

for more information.

VIII U3606B Service Guide

Declaration of Conformity (DoC)

The Declaration of Conformity (DoC) for this instrument is available on the

Agilent website. You can search the DoC by its product model or

description at the web address below.

http://regulations.corporate.agilent.com/DoC/search.htm

NOTE

If you are unable to search for the respective DoC, please contact your

local Agilent representative.

U3606B Service Guide IX

Table of Contents

1 Calibration Procedures

Calibration Overview 19

Closed-case calibration 19

Agilent calibration services 19

Calibration interval 20

Adjustment is recommended 20

Time required for calibration 20

Recommended Test Equipment 21

General measurement techniques 24

Using an electronic load 24

Connecting the current monitoring resistor 24

Test Considerations 25

Input and Output Connections 26

Zero Offset (Short) Verification Test Setup 27

Gain Verification Test Setup 28

Output Verification Test Setup 34

Performance Verification Tests Overview 38

Self-Tests 39

Performance Verification Tests 40

Zero offset verification test 40

Gain verification test 42

Output verification test 50

Additional Verification Tests 65

Optional capacitance gain verification test 65

Calibration Process 67

Calibration Security 68

XU3606B Service Guide

Unsecuring the Instrument for Calibration 69

Unsecuring the instrument from the front panel 69

Unsecuring the instrument from the remote interface 71

Changing the calibration security code 71

Resetting the security code to the factory default 72

Using the Front Panel for Adjustments 75

Adjustment Considerations 75

Aborting a Calibration in Progress 75

Adjustments Procedures 76

Zero offset adjustment 76

Gain adjustments 78

Output adjustments 90

Finishing the adjustments 100

Calibration Count 101

Calibration Message 102

Calibration Error Codes 103

2 Service and Maintenance

Operating Checklist 106

Cleaning 107

Fuse Replacement 108

To replace the power line fuse 108

To replace the current input fuse 110

Electrostatic Discharge (ESD) Precautions 112

Mechanical Disassembly 113

General disassembly 113

Replaceable Parts 120

To order replaceable parts 121

Andere Handbücher für U3606B

Inhaltsverzeichnis

Andere Agilent Technologies Multimeter Handbücher

Agilent Technologies

Agilent Technologies U1272A Bedienungsanleitung

Agilent Technologies

Agilent Technologies U1231A Bedienungsanleitung

Agilent Technologies

Agilent Technologies U1252B Bedienungsanleitung

Agilent Technologies

Agilent Technologies 34450A Bedienungsanleitung

Agilent Technologies

Agilent Technologies Agile or Elusive Signals Using Handbuch

Agilent Technologies

Agilent Technologies U1241B Handbuch

Agilent Technologies

Agilent Technologies 34401A Bedienungsanleitung

Agilent Technologies

Agilent Technologies U1251A Bedienungsanleitung

Agilent Technologies

Agilent Technologies U2741A Bedienungsanleitung

Agilent Technologies

Agilent Technologies U1241B Bedienungsanleitung

Agilent Technologies

Agilent Technologies U3606B Bedienungsanleitung

Agilent Technologies

Agilent Technologies U3606A Handbuch

Agilent Technologies

Agilent Technologies 3458A Bedienungsanleitung

Agilent Technologies

Agilent Technologies 34405A Handbuch

Agilent Technologies

Agilent Technologies 34401A Bedienungsanleitung

Agilent Technologies

Agilent Technologies L4411A Bedienungsanleitung

Agilent Technologies

Agilent Technologies E1326B Bedienungsanleitung

Agilent Technologies

Agilent Technologies 34410A Bedienungsanleitung

Agilent Technologies

Agilent Technologies U1253A Handbuch

Agilent Technologies

Agilent Technologies U1253B Bedienungsanleitung

Agilent Technologies

Agilent Technologies 3458A Gebrauchs- und Pflegehandbuch

Agilent Technologies

Agilent Technologies 34450A 5 Digit Multimeter Bedienungsanleitung

Agilent Technologies

Agilent Technologies 3458A Betriebsanleitung

Agilent Technologies

Agilent Technologies U1251A Bedienungsanleitung

Beliebte Multimeter Handbücher anderer Marken

Fluke

Fluke 83 Bedienungsanleitung

Hameg

Hameg HM 8012 Bedienungsanleitung

Mastech

Mastech MY70 Bedienungsanleitung

Steren

Steren MUL-300 Bedienungsanleitung

Somogyi Elektronic

Somogyi Elektronic home SMA 92 Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt METRAmax 6 Bedienungsanleitung

PeakTech

PeakTech 4000 Gebrauchs- und Pflegehandbuch

YOKOGAWA

YOKOGAWA 90050B Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt METRALINE DMM16 Bedienungsanleitung

Fluke

Fluke 8846A Bedienungs- und Wartungshandbuch

Tempo Communications

Tempo Communications MM200 Bedienungsanleitung

Elenco Electronics

Elenco Electronics CM-1555 Bedienungsanleitung

Mastech

Mastech MS8238C Bedienungsanleitung

SDAR

SDAR 830A, 830B, 830D, 830C Bedienungsanleitung

RS PRO

RS PRO RS-9519BT Bedienungsanleitung

BGS technic

BGS technic 8890 Bedienungsanleitung

Amprobe

Amprobe Hexagon 60 Bedienungsanleitung

Morris

Morris 57074 Bedienungsanleitung