Agilent Technologies 100 Bedienungsanleitung
Agilent Technologies
100 Automated
Disintegration
Apparatus
Operator’s Manual
100 Operator’s Manual
Notices
© Agilent Technologies, Inc. 2014
No part of this manual may be reproduced
in any form or by any means (including
electronic storage and retrieval or transla-
tion into a foreign language) without prior
agreement and written consent from Agi-
lent Technologies, Inc. as governed by
United States and international copyright
laws.
Manual Part Number
70-9066
Edition
Rev C, March 2014
Printed in USA
Agilent Technologies, Inc.
3501 Stevens Creek Blvd.
Santa Clara, CA 95052 USA
Warranty
The material contained in this doc-
ument is provided “as is,” and is
subject to being changed, without
notice, in future editions. Further,
to the maximum extent permitted
by applicable law, Agilent disclaims
all warranties, either express or
implied, with regard to this manual
and any information contained
herein, including but not limited to
the implied warranties of mer-
chantability and fitness for a par-
ticular purpose. Agilent shall not be
liable for errors or for incidental or
consequential damages in connec-
tion with the furnishing, use, or
performance of this document or of
any information contained herein.
Should Agilent and the user have a
separate written agreement with
warranty terms covering the mate-
rial in this document that conflict
with these terms, the warranty
terms in the separate agreement
shall control.
Technology Licenses
The hardware and/or software described in
this document are furnished under a
license and may be used or copied only in
accordance with the terms of such license.
Restricted Rights Legend
U.S. Government Restricted Rights. Soft-
ware and technical data rights granted to
the federal government include only those
rights customarily provided to end user
customers. Agilent provides this custom-
ary commercial license in Software and
technical data pursuant to FAR 12.211
(Technical Data) and 12.212 (Computer
Software) and, for the Department of
Defense, DFARS 252.227-7015 (Techni-
cal Data - Commercial Items) and DFARS
227.7202-3 (Rights in Commercial Com-
puter Software or Computer Software
Documentation).
Safety Notices
CAUTION
A CAUTION notice denotes a
hazard. It calls attention to an
operating procedure, practice, or
the like that, if not correctly per-
formed or adhered to, could result
in damage to the product or loss
of important data. Do not proceed
beyond a CAUTION notice until
the indicated conditions are fully
understood and met.
WARNING
A WARNING notice denotes a
hazard. It calls attention to an
operating procedure, practice,
or the like that, if not correctly
performed or adhered to, could
result in personal injury or
death. Do not proceed beyond a
WARNING notice until the
indicated conditions are fully
understood and met.
100 Operator’s Manual 3
Contents
Figures 7
1Safety 9
Electrical Hazards 9
Warning 11
Caution 11
Note 11
Information Symbols 12
2 Introduction 13
Conventions Used in this Manual 14
Serial Number Format 15
3 Setting Up the 100 17
Unpacking Your 100 18
Environmental Requirements for Installation 19
Setting up the Water Bath 20
Initial Power Up 21
Electrical Connections 21
Installing the Temperature Probe 22
Water Bath Status LEDs 23
Setting the Date / Time Clock 24
Mounting Baskets and Filling Beakers 25
Draining the Water Bath 25
4100 Operator’s Manual
Contents
Hidden Key Functions 26
4 Operating the 100 27
Setting Water Bath Temperature 28
Setting Print Frequency for the Report Center Printer 28
Adjusting Basket Height 29
Placing Dosage Units in the Baskets 30
Selecting Operating Mode 30
Single-basket Operation 30
Multi-basket Operation 31
Three-Basket Operation 34
Printer Operation During Manual or Program Operation
(Optional) 34
5 Troubleshooting and Maintenance 35
Preventive Maintenance 36
Weekly Maintenance 36
Monthly Maintenance 36
Every Six Months Maintenance 37
Yearly Maintenance 37
Disintegration Basket Care 37
Water Bath / Acrylic Care 38
Visual Checks 40
Water Bath Temperature Probe Accuracy Test 41
Report Center Impact Printer 43
Installing the Cartridge Ribbon 43
Replacing the Paper Roll 44
Toggling Your Printer Online 45
Printer Self Test 46
Printer Configuration 47
6100 Operator’s Manual
Contents
This page was intentionally left blank, except for this message.
8100 Operator’s Manual
Figures
This page was intentionally left blank, except for this message.
9
Agilent Technologies
100 Automated Disintegration Apparatus
Operator’s Manual
1
Safety
Electrical Hazards 9
The Agilent 100 has been designed and tested so that when used
properly you have an accurate, fast, flexible, and safe instrument.
If the equipment is used in a manner not specified by the manufacturer,
the protection provided by the equipment may be impaired.
The Agilent 100 is operated in conjunction with equipment that uses
aqueous liquids. Unskilled, improper, or careless use of this instrument
can create shock hazards, fire hazards, or other hazards which can cause
death, serious injury to personnel, or severe damage to equipment and
property.
Information on safety practices is provided with your instrument and
operation manuals. Before using your instrument or accessories, you
must thoroughly read these safety practices.
Observe all relevant safety practices at all times.
Electrical Hazards
The Agilent 100 contains electrical circuits, devices, and components
operating at dangerous voltages. Contact with these circuits, devices,
and components can cause death, serious injury, or painful electric
shock.
Panels or covers that are retained by fasteners which require the use of a
tool for removal may be opened only by Agilent-trained,
Agilent-qualified, or Agilent-authorized service engineers. Consult the
manuals or product labels supplied with the 100 to determine which
parts are operator-accessible.
10 100 Operator’s Manual
1Safety
Application of the wrong supply voltage, connection of the instrument
to an incorrectly wired supply outlet, or lack of proper electrical
grounding can create a fire hazard or a potentially serious shock hazard
and could seriously damage the instrument and any attached ancillary
equipment.
Always use a three-wire outlet with ground connection which is
adequately rated for the load. The installation must comply with local,
state, and federal safety regulations.
Do not connect the instrument to the main power supply until you have
made sure that the operating voltage is correctly set for the main power
supply in the specific outlet in your laboratory to which the equipment
will be connected.
Andere Handbücher für 100
3
Inhaltsverzeichnis
Andere Agilent Technologies Prüfgeräte Handbücher
Agilent Technologies
Agilent Technologies 16034G Bedienungsanleitung
Agilent Technologies
Agilent Technologies 16452A Bedienungsanleitung
Agilent Technologies
Agilent Technologies e6601a Montage- und Bedienungsanleitung
Agilent Technologies
Agilent Technologies 85052D Handbuch
Agilent Technologies
Agilent Technologies U1610/20A Bedienungsanleitung
Agilent Technologies
Agilent Technologies 16043A Bedienungsanleitung
Agilent Technologies
Agilent Technologies U2802A Bedienungsanleitung
Agilent Technologies
Agilent Technologies InfiniiVision 4000 X-Series Bedienungsanleitung
Agilent Technologies
Agilent Technologies 8960 Betriebsanleitung
Agilent Technologies
Agilent Technologies 54621A Bedienungsanleitung
Agilent Technologies
Agilent Technologies N9360A Betriebsanleitung
Agilent Technologies
Agilent Technologies 16451B Bedienungsanleitung
Agilent Technologies
Agilent Technologies InfiniiVision MSO6104A Kurzanleitung
Agilent Technologies
Agilent Technologies 37907A Installationsanleitung
Agilent Technologies
Agilent Technologies 8960 Series 10 Bedienungsanleitung
Agilent Technologies
Agilent Technologies N9360A Bedienungsanleitung
Agilent Technologies
Agilent Technologies InfiniiVision 3000 X- Series Einrichtungshandbuch
Agilent Technologies
Agilent Technologies E4406A Bedienungsanleitung
Agilent Technologies
Agilent Technologies 16334A Bedienungsanleitung
Agilent Technologies
Agilent Technologies 5DX II Series Bedienungsanleitung
