Agilent Technologies 3000 Series Handbuch

A

Agilent 3000 Series

Oscilloscopes

User’s and Service Guide

Agilent 3000 Series Oscilloscopes User’s Guide

Notices

2007-2008

No part of this manual may be reproduced in

any form or by any means (including

electronic storage and retrieval or

translation into a foreign language) without

prior agreement and written consent from

Agilent Technologies, Inc. as governed by

United States and international copyright

laws.

Manual Part Number

D3000-97017

Edition

Fourth Edition, September 2008

Available in electronic format only

Agilent Technologies, Inc.

1900 Garden of the Gods Road

Colorado Springs, CO 80907 USA

Print History

D3000-97000, March 2005

D3000-97012, February 2007

D3000-97015, December 2007

D3000-97017, September 2008

Warranty

The material contained in this docu-

ment is provided “as is,” and is sub-

ject to being changed, without notice,

in future editions. Further, to the max-

imum extent permitted by applicable

law, Agilent disclaims all warranties,

either express or implied, with regard

to this manual and any information

contained herein, including but not

limited to the implied warranties of

merchantability and fitness for a par-

ticular purpose. Agilent shall not be

liable for errors or for incidental or

consequential damages in connec-

tion with the furnishing, use, or per-

formance of this document or of any

information contained herein. Should

Agilent and the user have a separate

written agreement with warranty

terms covering the material in this

document that conflict with these

terms, the warranty terms in the sep-

arate agreement shall control.

Technology Licenses

The hardware and/or software described in

this document are furnished under a license

and may be used or copied only in accor-

dance with the terms of such license.

Restricted Rights Legend

U.S. Government Restricted Rights.

Software and technical data rights granted

to the federal government include only

those rights customarily provided to end

user customers. Agilent provides this

customary commercial license in Software

and technical data pursuant to FAR 12.211

(Technical Data) and 12.212 (Computer

Software) and, for the Department of

Defense, DFARS 252.227-7015 (Technical

Data - Commercial Items) and DFARS

227.7202-3 (Rights in Commercial Computer

Software or Computer Software

Documentation).

Safety Notices

CAUTION

A CAUTION notice denotes a haz-

ard. It calls attention to an operat-

ing procedure, practice, or the like

that, if not correctly performed or

adhered to, could result in damage

to the product or loss of important

data. Do not proceed beyond a

CAUTION notice until the indicated

conditions are fully understood and

met.

WARNING

A WARNING notice denotes a

hazard. It calls attention to an

operating procedure, practice, or

the like that, if not correctly per-

formed or adhered to, could result

in personal injury or death. Do not

proceed beyond a WARNING

notice until the indicated condi-

tions are fully understood and

met.

See also Appendix A, “Safety Notices,”

starting on page 147.

Trademark Acknowledgments

Windows and MS Windows are U.S.

registered trademarks of Microsoft

Corporation.

MATLAB is a U.S. registered trademark of

MathWorks.

Mathcad is a U.S. registered trademark of

Mathsoft.

Agilent 3000 Series Oscilloscopes User’s Guide 3

Agilent 3000 Series Oscilloscopes—At a Glance

The Agilent 3000 Series oscilloscopes are low-cost portable

digital storage oscilloscopes (DSOs) that deliver these

powerful features:

• Two- channel models and bandwidths:

•DSO3062A: 60 MHz.

•DSO3102A: 100 MHz.

•DSO3152A: 150 MHz.

•DSO3202A: 200 MHz.

• Bright 5.7 inch QVGA (320 x 240) 64K TFT color LCD

display.

•Upto1GSa/ssamplerate.

• Up to 4 kpts memory.

• Automatic voltage and time measurements (20) and

cursor measurements.

• Advanced triggering (edge, pulse width, and video).

• Math function waveforms: add, subtract, multiply, FFT.

• USB ports (1 host with rear panel module, 1 device).

The USB host port is used for easy printing, saving, and

sharing of waveforms, setups, screen BMP files, and CSV

data files.

The USB device port is used with the Scope Connect

software only. This port cannot be used for programming

the oscilloscope.

• Internal storage for 10 waveforms and 10 setups.

• Special digital filter and waveform recorder.

• Built- in 5- digit hardware frequency counter.

• Multi- language (11) user interface menus.

4 Agilent 3000 Series Oscilloscopes User’s Guide

In This Book

This guide shows how to use the Agilent 3000 Series

oscilloscopes.

1GettingStarted

Describes the basic steps to take when first using the

oscilloscope.

2 Displaying Data

Describes how to use the horizontal and vertical controls,

channel settings, math waveforms, reference waveforms, and

display settings.

3 Capturing Data

Describes acquisition and sampling modes and how to set up

triggers.

4 Making Measurements

Describes voltage, time, and cursor measurements.

5 Saving, Recalling, and Printing Data

Describes how to save, recall, and print data.

6 Oscilloscope Utility Settings

Describes other oscilloscope settings found in the Utility

menu.

7 Specifications and Characteristics

Describes the 3000 Series oscilloscopes’ specifications and

characteristics.

8Service

Describes oscilloscope maintanance, performance testing, and

what to do if your oscilloscope requires service.

Agilent 3000 Series Oscilloscopes User’s Guide 5

Contents

Agilent 3000 Series Oscilloscopes—At a Glance 3

In This Book 4

Figures 13

Tables 15

1 Getting Started 17

Step 1. Inspect the package contents 18

Step 2. Turn on the oscilloscope 21

Step 3. Load the default oscilloscope setup 22

Step 4. Input a waveform 23

Step 5. Become familiar with the Front Panel Controls 24

Using the Oscilloscope Menus 26

Step 6. Become familiar with the oscilloscope display 28

Step 7. Use Auto-Scale 29

Step 8. Compensate probes 31

Low Frequency Compensation 31

High Frequency Compensation 32

Step 9. Use the Run Control buttons 33

6 Agilent 3000 Series Oscilloscopes User’s Guide

Contents

2 Displaying Data 35

Using the Horizontal Controls 36

To adjust the horizontal scale 38

To adjust the horizontal position 39

To display the delayed sweep time base 39

To change the horizontal time base (Y-T or X-Y) 40

To reset the trigger offset 42

To specify a trigger holdoff 42

To view the sample rate 43

Using the Vertical Controls 44

To turn waveforms on or off (channel, math, or reference) 45

To adjust the vertical scale 45

To adjust the vertical position 46

To specify channel coupling 46

To specify a bandwidth limit 48

To specify the probe attenuation 50

To use a digital filter 51

To invert a waveform 51

Using Math Function Waveforms 53

To add, subtract, or multiply waveforms 54

To display the frequency domain using FFT 54

Using a Reference Waveform 57

To save a reference waveform 57

To position, scale, and invert a reference waveform 57

Contents

Agilent 3000 Series Oscilloscopes User’s Guide 7

Changing the Display Settings 58

To display waveforms as vectors or dots 58

To change the grid 58

To use waveform persistence 59

To clear the display 59

To adjust the display brightness 59

To change the menu display time 59

To invert screen colors 60

3 Capturing Data 61

Overview of Sampling 62

Sampling Theory 62

Aliasing 62

Oscilloscope Bandwidth and Sample Rate 63

Oscilloscope Rise Time 65

Oscilloscope Bandwidth Required 66

Memory Depth and Sample Rate 67

Choosing the Sampling Mode 68

To select the real-time sampling mode 69

To select the equivalent-time sampling mode 70

Choosing the Acquisition Mode 72

To select the Normal acquisition mode 72

To select the Average acquisition mode 72

To select the Peak Detect acquisition mode 74

Adjusting the Trigger Level 76

To adjust the trigger level 76

To force a trigger 77

Choosing the Trigger Mode 78

To set up edge triggers 78

To set up pulse width triggers 79

To set up video triggers 80

8 Agilent 3000 Series Oscilloscopes User’s Guide

Contents

Setting Other Trigger Parameters 82

To set the trigger sweep 82

To set the trigger coupling 82

Using the External Trigger Input 83

Recording/Playing-back Waveforms 83

To record waveforms 83

To play-back waveforms 84

To store recorded waveforms 86

4 Making Measurements 87

Displaying Automatic Measurements 88

To display an automatic measurement 88

To clear automatic measurements from the display 89

To display or hide all automatic measurements 89

Voltage Measurements 90

Vpp (Peak-to-Peak Voltage) 90

Vmax (Maximum Voltage) 91

Vmin (Minimum Voltage) 91

Vavg (Average Voltage) 91

Vamp (Amplitude Voltage = Vtop - Vbase) 91

Vtop (Top Voltage) 91

Vbase (Base Voltage) 91

Vrms (Root-Mean-Square Voltage) 92

Overshoot 92

Preshoot 92

Contents

Agilent 3000 Series Oscilloscopes User’s Guide 9

Time Measurements 93

Frequency 93

Period 93

Rise Time 94

Fall Time 94

Positive Pulse Width 95

Negative Pulse Width 95

Positive Duty Cycle 95

Negative Duty Cycle 95

Delay Between Rising Edges 96

Delay Between Falling Edges 96

Counter (Frequency) 96

Making Cursor Measurements 98

To use manually adjustable cursors 98

To use tracking cross-hair cursors 99

To display cursors for automatic measurements 100

5 Saving, Recalling, and Printing Data 101

Saving and Recalling Waveforms and Setups 102

To save and load waveforms 102

To save and load oscilloscope setups 103

Saving to and Recalling from a USB Mass Storage Device 104

To save/load waveforms to/from a USB device 104

To save/load oscilloscope setups to/from a USB device 105

To save screens to BMP format files (on a USB device) 105

To save data to CSV format files (on a USB device) 106

To save a file to a USB device 106

To load a file from a USB device 108

Printing the Display to a USB Printer 109

Supported Printers 110

10 Agilent 3000 Series Oscilloscopes User’s Guide

Contents

6 Oscilloscope Utility Settings 111

Performing Mask Tests 112

To enable/disable mask tests 112

To select the source channel for mask tests 112

To run/stop a mask test 112

To turn on/off the mask test message display 113

To set the mask test output condition 113

To stop a mask test on the output condition 113

To set up masks 114

Setting IO Parameters 115

Setting the Menu Language 115

Turning Sound ON or OFF 116

Displaying System Information 116

Performing Self-Tests 117

To perform screen tests 117

To perform key tests 117

Running Self-Calibration 118

7 Specifications and Characteristics 119

Specifications 120

Characteristics 121

8Service127

Testing Performance 128

Before Testing Performance 129

Vertical Performance Verification 130

DC Gain Accuracy Test 130

Analog Bandwidth - Maximum Frequency Check 135

Performance Test Record 144

Andere Handbücher für 3000 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Agilent Technologies Prüfgeräte Handbücher

Agilent Technologies

Agilent Technologies 8960 Series 10 Bedienungsanleitung

Agilent Technologies

Agilent Technologies InfiniiVision MSO6012A Bedienungsanleitung

Agilent Technologies

Agilent Technologies 2000 X Bedienungsanleitung

Agilent Technologies

Agilent Technologies N4010A Bedienungsanleitung

Agilent Technologies

Agilent Technologies InfiniiVision 7000B Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies U3042AE08 Bedienungsanleitung

Agilent Technologies

Agilent Technologies 8960 Bedienungsanleitung

Agilent Technologies

Agilent Technologies InfiniiVision 5000 Series Handbuch

Agilent Technologies

Agilent Technologies InfiniiVision 3000 X-Series Handbuch

Agilent Technologies

Agilent Technologies 3070 Series Betriebsanleitung

Agilent Technologies

Agilent Technologies 8922M Bedienungsanleitung

Agilent Technologies

Agilent Technologies InfiniiVision 7000B Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies BERT N4901A Bedienungsanleitung

Agilent Technologies

Agilent Technologies U1604A Bedienungsanleitung

Agilent Technologies

Agilent Technologies 16047A Bedienungsanleitung

Agilent Technologies

Agilent Technologies InfiniiVision 6000 Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies aurora Duet Bedienungsanleitung

Agilent Technologies

Agilent Technologies BERT Serial Bedienungsanleitung

Agilent Technologies

Agilent Technologies InfiniiVision 7000 Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies 4072A Advanced Bedienungsanleitung

Agilent Technologies

Agilent Technologies E7495A RF Bedienungsanleitung

Agilent Technologies

Agilent Technologies 41900A Bedienungsanleitung

Agilent Technologies

Agilent Technologies J-BERT N4903B Bedienungsanleitung

Agilent Technologies

Agilent Technologies 85054D Handbuch

Beliebte Prüfgeräte Handbücher anderer Marken

SMART

SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung

Vernier

Vernier Go Direct Voltage Bedienungsanleitung

Lifeloc

Lifeloc R.A.D.A.R. Bedienungsanleitung

Fluke

Fluke T5-600 Bedienungs- und Montageanleitung

Mercury

Mercury TSL01 Bedienungsanleitung

MAHA

MAHA MBT Series Bedienungsanleitung

Fuji Electric

Fuji Electric P-61 Bedienungsanleitung

ETC

ETC SealerAtor Bedienungsanleitung

Skyfine

Skyfine ETHYWAY V2 Bedienungsanleitung

Appion

Appion G5 Twin Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 8159-0112A Bedienungsanleitung

BW Technologies

BW Technologies MicroDock II Bedienungsanleitung

Sun Nuclear

Sun Nuclear 1027 Bedienungsanleitung

Biomark

Biomark HPR LITE READER Bedienungsanleitung

Hioki

Hioki 3169-20 Bedienungsanleitung

Ashcroft

Ashcroft ATE-100 Bedienungsanleitung

Rohde & Schwarz

Rohde & Schwarz RTA4000 Bedienungsanleitung

Ritmix

Ritmix RAT-701 Bedienungsanleitung