Agilent Technologies Infiniium 90000 Q-Series Bedienungsanleitung

Agilent Infiniium

90000 Q-Series

Oscilloscopes

User’s Guide

Notices

No part of this manual may be reproduced

in any form or by any means (including

electronic storage and retrieval or

translation into a foreign language) without

prior agreement and written consent from

Agilent Technologies, Inc. as governed by

United States and international copyright

laws.

Manual Part Number

54932-97000

Edition

October 1, 2012

Available in electronic format only

Agilent Technologies, Inc.

1900 Garden of the Gods Road

Colorado Springs, CO 80907 USA

Warranty

The material contained in this docu-

ment is provided “as is,” and is sub-

ject to being changed, without notice,

in future editions. Further, to the max-

imum extent permitted by applicable

law, Agilent disclaims all warranties,

either express or implied, with regard

to this manual and any information

contained herein, including but not

limited to the implied warranties of

merchantability and fitness for a par-

ticular purpose. Agilent shall not be

liable for errors or for incidental or

consequential damages in connection

with the furnishing, use, or perfor-

mance of this document or of any

information contained herein. Should

Agilent and the user have a separate

written agreement with warranty

terms covering the material in this

document that conflict with these

terms, the warranty terms in the sep-

arate agreement shall control.

Technology Licenses

The hardware and/or software described in

this document are furnished under a

license and may be used or copied only in

accordance with the terms of such license.

Restricted Rights Legend

If software is for use in the performance of

a U.S. Government prime contract or

subcontract, Software is delivered and

licensed as “Commercial computer

software” as defined in DFAR 252.227-7014

(June 1995), or as a “commercial item” as

defined in FAR 2.101(a) or as “Restricted

computer software” as defined in FAR

52.227-19 (June 1987) or any equivalent

agency regulation or contract clause. Use,

duplication or disclosure of Software is

subject to Agilent Technologies’ standard

commercial license terms, and non-DOD

Departments and Agencies of the U.S.

Government will receive no greater than

Restricted Rights as defined in FAR

52.227-19(c)(1-2) (June 1987). U.S.

Government users will receive no greater

than Limited Rights as defined in FAR

52.227-14 (June 1987) or DFAR

252.227-7015 (b)(2) (November 1995), as

applicable in any technical data.

Safety Notices

CAUTION

A CAUTION notice denotes a haz-

ard. It calls attention to an operat-

ing procedure, practice, or the like

that, if not correctly performed or

adhered to, could result in damage

to the product or loss of important

data. Do not proceed beyond a

CAUTION notice until the indicated

conditions are fully understood and

met.

WARNING

A WARNING notice denotes a

hazard. It calls attention to an

operating procedure, practice, or

the like that, if not correctly per-

formed or adhered to, could result

in personal injury or death. Do not

proceed beyond a WARNING

notice until the indicated condi-

tions are fully understood and met.

See also Appendix A, “Safety Notices,”

starting on page 83.

Trademarks

Windows® is a trademark or registered

trademark of Microsoft Corporation in the

United States and/or other countries.

Agilent Infiniium 90000 Q-Series Oscilloscopes User’s Guide 3

90000 Q-Series Oscilloscopes—At a Glance

Table 1 90000 Q-Series Oscilloscope Bandwidths, Sample Rates, and Memory Depths

Bandwidth Sample rate Memory depth

2 channel 4 channel 2 channel 4 channel Standard Maximum

DSAX96204Q 63 GHz 33 GHz 160 GS/s 80 GS/s 50 Mpts 2 Gpts

DSOX96204Q 63 GHz 33 GHz 20 Mpts 2 Gpts

DSAX95004Q 50 GHz 33 GHz 50 Mpts 2 Gpts

DSOX95004Q 50 GHz 33 GHz 20 Mpts 2 Gpts

DSAX93304Q 33 GHz 33 GHz 80 GS/s 80 GS/s 50 Mpts 2 Gpts

DSOX93304Q 33 GHz 33 GHz 20 Mpts 2 Gpts

DSAX92504Q 25 GHz 25 GHz 50 Mpts 2 Gpts

DSOX92504Q 25 GHz 25 GHz 20 Mpts 2 Gpts

DSAX92004Q 20 GHz 20 GHz 50 Mpts 2 Gpts

DSOX92004Q 20 GHz 20 GHz 20 Mpts 2 Gpts

4 Agilent Infiniium 90000 Q-Series Oscilloscopes User’s Guide

Ease of use with high performance

The Agilent Technologies Infiniium oscilloscopes combine unprecedented

ease- of use with high- performance digitizing oscilloscope functionality to

simplify your design and analysis measurement tasks.

•Traditional oscilloscope front- panel interface provides direct access to

the controls needed for most troubleshooting tasks.

•Graphical user interface with menus, windows, dialogs boxes, and

toolbars provides easy access to dozens of configuration and analysis

tools, ensuring you can set up and make the most complex

measurements.

•All models offer 80 GSa/s sampling rate on all four channels.

•Models with bandwidths from 20 GHz to 63 GHz.

Display shows waveforms and graphical user interface

•Graphical interface allows direct interaction with waveforms, including

drag- and- drop positioning and instant waveform zoom.

•Touchscreen display allows oscilloscope operation without an external

pointing device.

•Waveforms displayed in color, making correlation easy.

•Current configuration parameters displayed near the waveform display

and are colorcoded to make identification easy.

•Graphical interface menus and toolbars simplify complex measurement

setups.

Horizontal controls set sweep speed and position

•Intensified waveforms on main sweep window make it easy to see what

will appear in the zoom window.

Acquisition and general controls start and stop the oscilloscope and do basic

setup

•Run and stop controls for continuous or single acquisitions.

•Clear display before one or more acquisitions.

•Default setup and Autoscale set initial configuration.

Hard disk drive and USB 2.0 port for saving and restoring setups and

measurement results

•Store measurement displays for inclusion in reports and test setup

guides.

•Store oscilloscope setups to repeat tests another time.

•Hard disk stores oscilloscope operating system.

Agilent Infiniium 90000 Q-Series Oscilloscopes User’s Guide 5

Trigger setup controls set mode and basic parameters

•Select Edge, Glitch, or Advanced Modes.

•Choose input source and slope.

•Use graphical user interface to simplify configuration of pattern, state,

delay, and violation trigger modes.

•Use auxiliary trigger to increase triggering flexibility.

Vertical controls set attenuation, and position

•Color- coded knobs make it easy to find the controls that affect each

waveform.

Marker and quick measurements help measure waveform parameters

•Waveform markers A and B to check voltage or Δ- time at any point on

the displayed waveform.

6 Agilent Infiniium 90000 Q-Series Oscilloscopes User’s Guide

In This Book

This book gives you the information you need to begin using the Infiniium

90000 Q- Series oscilloscopes. It contains four chapters:

Chapter 1, “Setting Up the Oscilloscope,” starting on page 13 contains

inspection, power requirements, air flow, and setup information.

Chapter 2, “Working in Comfort,” starting on page 27 contains

recommendations for working comfortably and safely while operating the

Infiniium oscilloscope.

Chapter 3, “Using the Oscilloscope,” starting on page 31 gives an overview

of the front and back panel inputs and outputs, front- panel controls, and

graphical user interface, and tells you how to perform basic operations

with the oscilloscope.

Chapter 4, “Accessing the Online Help,” starting on page 79 describes the

Infiniium oscilloscope application’s online help contents and navigation.

The online help describes how to use the Infiniium oscilloscope application

in more detail.

For More Information

•For detailed information on how the oscilloscope makes measurements

and how to use the oscilloscope, see the Infiniium oscilloscope

application’s online help.

•For information on controlling the oscilloscope from a remote computer,

see the Oscilloscopes Programmer’s Reference found in the Infiniium

oscilloscope application’s online help.

•For information on testing and servicing the oscilloscope, see the

Service Guide manual found in the Infiniium oscilloscope application’s

online help.

Agilent Infiniium 90000 Q-Series Oscilloscopes User’s Guide 7

Contents

90000 Q-Series Oscilloscopes—At a Glance 3

In This Book 6

1 Setting Up the Oscilloscope

To inspect package contents 14

To inspect options and accessories 15

Environmental Conditions 15

To position for proper airflow 16

To connect the mouse, keyboard, and LAN 17

To connect power 18

Power Supply Protection Features 19

To connect oscilloscope probes 19

To connect threaded RF cables 21

To tilt the oscilloscope for easier viewing 21

To turn on the oscilloscope 22

To verify basic oscilloscope operation 23

Installing application programs on Infiniium 24

Changing Windows Operating System Settings 25

To turn off the oscilloscope 26

To clean the oscilloscope 26

8 Agilent Infiniium 90000 Q-Series Oscilloscopes User’s Guide

2 Working in Comfort

About Repetitive Strain Injury 28

What is RSI? 28

What causes RSI? 28

What if I experience discomfort? 28

Mice and Other Input Devices 29

3 Using the Oscilloscope

Front Panel Inputs and Outputs 32

Channel 1-4 Inputs 32

RealEdge 1R, 3R Channel Inputs 32

Ground 33

Aux Out 33

Cal Out 33

Probe Compensation Terminal 33

USB Host Ports 33

Front or Back Panel Inputs and Outputs 34

Trig Out 34

Aux Trig 34

Back Panel Inputs and Outputs 35

Motherboard I/O 35

USB Device Port 35

10 MHz In, 10 MHz Out 36

100 MHz In, 100 MHz Out 36

Agilent Infiniium 90000 Q-Series Oscilloscopes User’s Guide 9

Front Panel Controls (Keys and Knobs) 37

Acquisition Run Controls 38

To start and stop waveform acquisition 38

Setup and Display Controls 39

To set the oscilloscope to a known starting condition 39

To clear the waveform display 39

To enable or disable the touch screen 40

Horizontal Controls 40

To adjust the horizontal scale and horizontal position 40

To magnify a part of the waveform using Zoom 41

Vertical Controls 42

To turn an analog channel on or off 42

To adjust the analog channel’s vertical scale and offset 43

Trigger Controls 43

To set the oscilloscope to trigger on an edge 44

Measure Controls 45

To use the markers 46

To use the quick measurements 46

10 Agilent Infiniium 90000 Q-Series Oscilloscopes User’s Guide

Using the Graphical Interface 48

Graphical User Interface Layout 48

Measurement Toolbar 49

Tab Display Area 50

Waveform Display Area 51

Menu Control and Menus 52

Horizontal and Trigger Toolbar 52

To perform basic user interface operations 54

To select a command from the menu bar 57

To select a command from a context-sensitive menu 58

To start and stop waveform acquisition 61

To clear the waveform display 61

To print the screen 62

To change waveform brightness 62

To turn a channel on or off 63

To adjust the vertical offset 63

To adjust vertical scaling 65

To access the channel setup 66

To set the horizontal reference point 67

To adjust horizontal scale 68

To adjust horizontal position 69

To access the horizontal setup 70

To zoom on a section of the waveform 71

To move the markers using the graphical interface 72

To make a measurement on a waveform 73

To access the trigger setup 75

To set an edge trigger 76

To set dialog box preferences 77

Removable Hard Drive 78

To recover your Infiniium hard disk 78

Infiniium Hard Drive Recovery 78

4 Accessing the Online Help

To access the online help 79

To navigate through the online help 81

To access context-sensitive information 81

Andere Handbücher für Infiniium 90000 Q-Series

Inhaltsverzeichnis

Andere Agilent Technologies Prüfgeräte Handbücher

Agilent Technologies

Agilent Technologies 2000 X-Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies InfiniiVision 3000 X-Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies TS-5400 Stücklistenhandbuch

Agilent Technologies

Agilent Technologies 85056A Handbuch

Agilent Technologies

Agilent Technologies N4419B Bedienungsanleitung

Agilent Technologies

Agilent Technologies 54621A Bedienungsanleitung

Agilent Technologies

Agilent Technologies J2126A Installations- und Betriebshandbuch

Agilent Technologies

Agilent Technologies Ininiium 90000 Bedienungsanleitung

Agilent Technologies

Agilent Technologies 54621A Bedienungsanleitung

Agilent Technologies

Agilent Technologies U1602B Handbuch

Agilent Technologies

Agilent Technologies 54522A Bedienungsanleitung

Agilent Technologies

Agilent Technologies E6392B Bedienungsanleitung

Agilent Technologies

Agilent Technologies U3042AE08 Bedienungsanleitung

Agilent Technologies

Agilent Technologies 16452A Bedienungsanleitung

Agilent Technologies

Agilent Technologies E4406A VSA Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies 1100 Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies 87075C Option H08 Handbuch

Agilent Technologies

Agilent Technologies U1452A Bedienungsanleitung

Agilent Technologies

Agilent Technologies 54621A Handbuch

Agilent Technologies

Agilent Technologies 83480A Bedienungsanleitung

Agilent Technologies

Agilent Technologies 86100A Anleitung zur Verwendung

Agilent Technologies

Agilent Technologies 54641A Bedienungsanleitung

Agilent Technologies

Agilent Technologies InfiniiVision 5000 Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies E4406A VSA Series Bedienungsanleitung

Beliebte Prüfgeräte Handbücher anderer Marken

SMART

SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung

Lifeloc

Lifeloc R.A.D.A.R. Bedienungsanleitung

Fluke

Fluke T5-600 Bedienungs- und Montageanleitung

Mercury

Mercury TSL01 Bedienungsanleitung

MAHA

MAHA MBT Series Bedienungsanleitung

Fuji Electric

Fuji Electric P-61 Bedienungsanleitung

ETC

ETC SealerAtor Bedienungsanleitung

Skyfine

Skyfine ETHYWAY V2 Bedienungsanleitung

Appion

Appion G5 Twin Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 8159-0112A Bedienungsanleitung

BW Technologies

BW Technologies MicroDock II Bedienungsanleitung

Sun Nuclear

Sun Nuclear 1027 Bedienungsanleitung

Biomark

Biomark HPR LITE READER Bedienungsanleitung

Hioki

Hioki 3169-20 Bedienungsanleitung

Ashcroft

Ashcroft ATE-100 Bedienungsanleitung

Rohde & Schwarz

Rohde & Schwarz RTA4000 Bedienungsanleitung

Ritmix

Ritmix RAT-701 Bedienungsanleitung

Sealey

Sealey TA130 Bedienungsanleitung