Agilent Technologies E6392B Bedienungsanleitung

Errata

Title & Document Type: E6392B GSM MS Test Set User’s Guide

Manual Part Number: E6392-90051

Revision Date: November 2001

HP References in this Manual

This manual may contain references to HP or Hewlett-Packard. Please note that

Hewlett-Packard's former test and measurement, semiconductor products and chemical

analysis businesses are now part of Agilent Technologies. We have made no changes to

this manual copy. The HP XXXX referred to in this document is now the Agilent XXXX.

For example, model number HP8648A is now model number Agilent 8648A.

About this Manual

We’ve added this manual to the Agilent website in an effort to help you support your

product. This manual provides the best information we could find. It may be incomplete

or contain dated information, and the scan quality may not be ideal. If we find a better

copy in the future, we will add it to the Agilent website.

Support for Your Product

Agilent no longer sells or supports this product. You will find any other available product

information on the Agilent Test & Measurement website:

www.tm.agilent.com

Search for the model number of this product, and the resulting product page will guide

you to any available information. Our service centers may be able to perform calibration

if no repair parts are needed, but no other support from Agilent is available

Agilent Technologies

E6392B GSM MS Test Set

User’s Guide

Serial Numbers

This manual applies directly to instruments with serial number prefix

JP5MG, or firmware revision B.03.00 and above.

Agilent Part No. E6392-90051

Printed in Japan

Manual Part Number

E6392-90051

Edition/Print Date

All Editions and Updates of this manual

and their creation dates are listed below.

First Edition......................February 2000

Second.....................................June 2000

Third.........................................July 2000

Fourth.............................September 2001

Fifth................................November 2001

Notices

Agilent Technologies, Inc. 2000, 2001

Information contained in this document

is subject to change without notice.

This document contains proprietary

information that is protected by

part of this document may be

photocopied, reproduced, or, translated

to another language without the prior

written consent of Agilent Technologies.

Certification

Agilent Technologies certifies that this

product met its published specifications

at the time of shipment from the factory.

Agilent Technologies further certifies

that its calibration measurements are

traceable to the United States National

Institute of Standards and Technology, to

the extent allowed by the Institution's

calibration facility, or to the calibration

facilities of other International Standards

Organization members.

Warranty

This Agilent Technologies instrument

product is warranted against defects in

material and workmanship for a period

of one year from the date of shipment,

except for certain components listed in

Specifications section of this manual.

During the warranty period, Agilent

Technologies will, at its option, either

repair or replace products which prove to

be defective.

For warranty service or repair, this

product must be returned to a service

facility designated by Agilent. Buyer

shall prepay shipping charges to Agilent

Technologies and Agilent Technologies

shall pay shipping charges to return the

product to Buyer. However, Buyer shall

pay all shipping charges, duties, and

taxes for products returned to Agilent

Technologies from another country.

Agilent Technologies warrants that its

software and firmware designated by

Agilent for use with an instrument will

execute its programming instruction

when properly installed on that

instrument. Agilent Technologies does

not warrant that the operation of the

instrument, or software, or firmware will

be uninterrupted or error free.

Limitation Of Warranty

The foregoing warranty shall not apply

to defects resulting from improper or

inadequate maintenance by Buyer,

Buyer-supplied software or interfacing,

unauthorized modification or misuse,

operation outside of the environmental

specifications for the product, or

improper site preparation or

maintenance. No other warranty is

expressed or implied. Agilent

Technologies specifically disclaims the

implied warranties of merchantability

and fitness for a particular purpose.

Exclusive Remedies

The remedies provided herein are buyer's

sole and exclusive remedies. Agilent

Technologies shall not be liable for any

direct, indirect, special, incidental, or

consequential damages, whether based

on contract, tort, or any other legal

theory.

Assistance

Product maintenance agreements and

other customer assistance agreements are

available for Agilent Technologies

products.

For any assistance, contact your nearest

Agilent Technologies Sales and Service

Office. Addresses are provided at the

back of this manual.

Agilent Technologies Japan, Ltd.

Kobe Wireless Test Development

1-3-2, Murotani, Nishi-ku, Kobe-shi,

Hyogo, 651-2241 Japan

iii

Safety

Information The following general safety precautions must be observed during all phases of

operation, service, and repair of this instrument. Failure to comply with these

precautions or with specific WARNINGS elsewhere in this manual violates safety

standards of design, manufacture, and intended use of the instrument. Agilent

Technologies assumes no liability for the customer's failure to comply with these

requirements.

NOTE: The Agilent Technologies E6392B complies with INSTALLATION CATEGORY II and

POLLUTION DEGREE 2 in IEC61010-1. Agilent E6392B is an INDOOR USE product.

Ground the Instrument

To minimize electric shock hazard, the instrument chassis and cabinet must be

connected to an electrical protective earth ground. The instrument must be

connected to ac power through a grounded power cable, with the ground wire

firmly connected to an electrical ground (safety ground) at the power outlet. Any

interruption of the protective (grounding) conductor or disconnection of the

protective earth terminal will cause a potential shock hazard that could result in

personal injury.

DO NOT Operate In An Explosive Atmosphere

Do not operate the instrument in the presence of flammable gasses or fumes.

Operation of any electrical instrument in such an environment constitutes a

definite safety hazard.

Keep Away From Live Circuits

Operating personnel must not remove instrument covers. Component replacement

and internal adjustments must be made by qualified maintenance personnel. Do

not replace components with the power cable connected. Under certain

conditions, dangerous voltages may exist even with the power cable removed. To

avoid injuries, always disconnect power and discharge circuits before touching

them.

DO NOT Service Or Adjust Alone

Do not attempt internal service or adjustment unless another person, capable of

rendering first aid and resuscitation, is present.

DO NOT Substitute Parts Or Modify Instrument

Because of the danger of introducing additional hazards, do not install substitute

parts or perform unauthorized modifications to the instrument. Return the

instrument to an Agilent Technologies Sales and Service Office for service and

repair to ensure that safety features are maintained.

Safety

Symbols General definitions of safety symbols used on equipment or in manuals are listed

below.

Refer to the instruction manual when you see this symbol.

Alternating current.

Direct current.

On (Supply).

Off (Supply).

In position of push-button switch.

Out position of push-button switch.

WARNING: This WARNING notice denotes a hazard. It calls attention to a procedure, practice,

condition or the like, which, if not correctly performed or adhered to, could result in

injury or death to personnel.

CAUTION: This CAUTION notice denotes a hazard. It calls attention to a procedure,

practice, condition or the like, which, if not correctly performed or adhered

to, could result in damage to or destruction of part or all of the product.

NOTE: NOTE denotes important information. It calls attention to a procedure, practice, condition

or the like, which is essential to highlight.

ACOUSTIC NOISE EMISSION

LpA < 70 dB

operator position

normal operation

per ISO 7779

GERXUSCHEMISSION

LpA < 70 dB

am Arbeitsplatz

normaler Betrieb

nach DIN 45635 T. 19

vii

In this Book This guide describes how to use the Agilent Technologies E6392B GSM MS Test

Set. This Test Set provides a variety of test functions to validate the performances

of GSM900, E-GSM, DCS1800, and PCS1900 mobile phones.

Throughoutthis manual the term "Test Set" is used to refer to the Agilent E6392B.

This guide contains the following information:

Chapter 1, "Preparing for Use"

This chapter provides a quick overview on the fundamentals required before starting

actual tests with the Test Set.

Chapter 2, "Using Functions"

This chapter explains some of basic test procedures for the first time users to become

familiar with the Test Set.

Chapter 3, "Screen Reference"

This chapter provides detailed information on each function of the screen displays and

activated softkeys.

Chapter 4, "Functionality/Operation"

This chapter introduces the typical block diagram of a GSM mobile phone to relate

some blocks with each test item done by the Test Set, especially from the perspective

of incoming inspection and repair for GSM mobile phones.

Chapter 5, "Specifications"

This chapter lists the performance characteristics of the Test Set.

Appendix A, “General Information on the GSM System”

This appendix describes some major information on the GSM system for your

reference.

Appendix B, “Input Fields and Allowable Ranges”

This appendix summarizes the allowable ranges and corresponding choices for the

parameter input fields.

Appendix C, “Manual Changes”

This appendix provides a manual change history.

viii

Contents

Table of Contents

1. Preparing for Use

Major Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Installing the Test Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Checking the Shipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Power Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Meeting Electrical and Environmental Requirements . . . . . . . . . . . . . . . . . . . . .20

Replacing the Line Power Fuse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Warm-Up Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Preparation for Each Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

System Requirement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

Installing the Test SIM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

Adjusting the Display Contrast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

UUT Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

Entering Attenuations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

Connecting a Printer (optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

No Measurement after Start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

Out of Order Internal Clock, Lost Settings, or Both . . . . . . . . . . . . . . . . . . . . . . .25

2. Using Functions

Testing a Mobile Phone with the Test Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

Testing a Dual Band Mobile with AUTOMATIC TEST . . . . . . . . . . . . . . . . . . . . . .29

Testing a Dual Band Mobile with MANUAL TEST (Synchronous mode) . . . . . . . .34

Testing a Mobile with MANUAL TEST (Asynchronous mode) . . . . . . . . . . . . . . . .40

Testing a Mobile with MANUAL TEST (GPRS mode) . . . . . . . . . . . . . . . . . . . . . .44

Testing a Mobile with SPECTRUM MONITOR . . . . . . . . . . . . . . . . . . . . . . . . . . . .48

3. Screen Reference

General Operation Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52

Front Panel Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52

Rear Panel Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54

Display Annotation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55

Test Parameters, Test Items and Allowable Ranges . . . . . . . . . . . . . . . . . . . . . . .58

Initial Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61

AUTOMATIC TEST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63

Stand-by Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63

Talk Measuring Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69

Aborted Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71

Pass/Fail Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73

Pass/Fail Screen Examples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75

MANUAL TEST (Synchronous Mode) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80

Measurement Mode Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Agilent Technologies Prüfgeräte Handbücher

Agilent Technologies

Agilent Technologies InfiniiVision MSO6102A Bedienungsanleitung

Agilent Technologies

Agilent Technologies aurora Duet Bedienungsanleitung

Agilent Technologies

Agilent Technologies E5022B Betriebsanleitung

Agilent Technologies

Agilent Technologies InfiniiVision 4000 X-Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies N4010A Bedienungsanleitung

Agilent Technologies

Agilent Technologies DSO-X-2024A Bedienungsanleitung

Agilent Technologies

Agilent Technologies Infiniium DCA Handbuch

Agilent Technologies

Agilent Technologies XX3625 Bedienungsanleitung

Agilent Technologies

Agilent Technologies 54830 Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies E1852B Bedienungsanleitung

Agilent Technologies

Agilent Technologies 100 Bedienungsanleitung

Agilent Technologies

Agilent Technologies 1000A Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies 16451B Bedienungsanleitung

Agilent Technologies

Agilent Technologies Infiniium 90000 Q-Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies E6651A Bedienungsanleitung

Agilent Technologies

Agilent Technologies U1602B Handbuch

Agilent Technologies

Agilent Technologies InfiniiVision 4000 X-Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies InfiniiVision 5000 Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies InfiniiVision 7000B Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies 11974 Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies 87511A Bedienungsanleitung

Agilent Technologies

Agilent Technologies 54835A Bedienungsanleitung

Agilent Technologies

Agilent Technologies InfiniiVision 6000 Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies InfiniiVision 7000 Series Bedienungsanleitung

Beliebte Prüfgeräte Handbücher anderer Marken

SMART

SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung

Vernier

Vernier Go Direct Voltage Bedienungsanleitung

Lifeloc

Lifeloc R.A.D.A.R. Bedienungsanleitung

Fluke

Fluke T5-600 Bedienungs- und Montageanleitung

Mercury

Mercury TSL01 Bedienungsanleitung

MAHA

MAHA MBT Series Bedienungsanleitung

Fuji Electric

Fuji Electric P-61 Bedienungsanleitung

ETC

ETC SealerAtor Bedienungsanleitung

Skyfine

Skyfine ETHYWAY V2 Bedienungsanleitung

Appion

Appion G5 Twin Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 8159-0112A Bedienungsanleitung

BW Technologies

BW Technologies MicroDock II Bedienungsanleitung

Sun Nuclear

Sun Nuclear 1027 Bedienungsanleitung

Biomark

Biomark HPR LITE READER Bedienungsanleitung

Hioki

Hioki 3169-20 Bedienungsanleitung

Ashcroft

Ashcroft ATE-100 Bedienungsanleitung

Rohde & Schwarz

Rohde & Schwarz RTA4000 Bedienungsanleitung

Ritmix

Ritmix RAT-701 Bedienungsanleitung