AgriProTech AviTrac Bedienungsanleitung

Contact@agriprotech.fr - 02 98 96 08 12 - www.agriprotech.fr

AVITRAC®OPERATING INSTRUCTIONS

contact@agriprotech.fr –Tel: +33 (0)2 98 96 08 12 - www.agriprotech.fr

A. You bought your AviTrac® acoustic bird repeller directly from AgriProTech

Your warranty is automatically activated.

B. You bought your AviTrac® acoustic bird repeller from one of our resellers

It is really easy to benefit from the 1 year AgriProTech manufacturer warranty:

1. Create a customer account on www.AgriProTech.fr.

2. Send us an email with the following details:

Serial number of your device (silver label on the top left of the waterproof

case, e.g.: *AVT-012317*)

Invoice date and number and name and address of the reseller from which

you bought your AviTrac®.

It’s done!

If you have any question, please feel free to contact us on +33 (0)2 98 96 08 12 or

email us at contact@agriprotech.fr .

How to benefit from the 1 year

AgriProTech manufacturer warranty

contact@agriprotech.fr –Tel: +33 (0)2 98 96 08 12 - www.agriprotech.fr

AviTrac® Operating Instructions

You have acquired an AviTrac® acoustic bird repeller. These operating instructions will help you get the most

out of your device. Please follow these operating instructions and keep them for future reference.

Your AviTrac® kit includes:

An IP55 sealed electronic box containing:

A rechargeable battery 12V 5AH or 12V 7AH

(depending on model)

An electronic module with a screen and keyboard

A memory card of repelling acoustic signals

A removable and foldable rustproof metal chassis

One or more speaker(s)

A battery charger

As an optional extra: a power supply or a keylock

Summary

I –The different elements of acoustic bird repeller AviTrac® .....................................................................................................4

1. Package .......................................................................................................................................................................................................4

2. Electronic box...........................................................................................................................................................................................4

3. Cable for model AviTrac® 18S..........................................................................................................................................................4

II - Warnings :.....................................................................................................................................................................................................5

1. First use ......................................................................................................................................................................................................5

2. The sounds ................................................................................................................................................................................................5

3. Battery charger and power supply..................................................................................................................................................5

III - Installation..................................................................................................................................................................................................6

1. Stainless steel support mounting.....................................................................................................................................................6

2. Installation of speaker for AviTrac® 9M and 18M...................................................................................................................8

2. Installation of speaker for AviTrac® 18S.....................................................................................................................................9

IV - Programmation...................................................................................................................................................................................... 10

1. Screen and keyboard.......................................................................................................................................................................... 10

2. Switching on the device .................................................................................................................................................................... 10

3. Programming of different menus.................................................................................................................................................. 11

4. Emission intervals............................................................................................................................................................................... 13

5. Choice of emitted sounds ................................................................................................................................................................. 13

V - Maintenance.............................................................................................................................................................................................. 14

1. Storage of the device and maintenance of the battery......................................................................................................... 14

2. Waste management ............................................................................................................................................................................ 14

VI –Resolving problems............................................................................................................................................................................. 14

VII - Guarantee................................................................................................................................................................................................ 15

Caution: The green seal protecting the

weatherproof case must not be

removed. If you remove this seal, your

device will no longer be under

warranty.

If you have any problems with your

AviTrac® acoustic bird repeller, please

seek advice from the AgriProTech

customer service on +33 2 98 96 08 12

or by email at contact@agriprotech.fr.

contact@agriprotech.fr –Tel: +33 (0)2 98 96 08 12 - www.agriprotech.fr

I –The different elements of your AviTrac® acoustic bird repeller

1. Package

1. Transparent door protecting the

electronic box

2. Key lock (optional)

3. Rustproof metal chassis

4. Speaker (may vary depending on model)

5. Speaker output

6. Electronic box (see close-up below)

7. Battery charger and power supply input

2. Electronic box

8. Screen

9. Luminosity sensor

10. Memory card slot

11. Select button

12. OK button

3. Cable for AviTrac® 18S model

13. Y-shaped cable

contact@agriprotech.fr –Tel: +33 (0)2 98 96 08 12 - www.agriprotech.fr

II - Warnings:

1. First use

The battery should be fully charged before first use. If the battery level does not indicate 100% on the

status screen (to access it, press Select button when on home menu), then charge the battery. Plug your

device into a wall socket using your charger (the charger should be connected to input n°7, see Chapter I.

1.) for approximately 10 hours.

Once the device is fully charged (the light on the charger becomes green instead of red), always unplug the

charger from the power outlet and from your AviTrac® device.

In order to avoid battery damage, please make sure you do not let the battery fully discharge.

When the AviTrac® is used daily, recharge it every 3 weeks and make sure it is fully charged before

you turn it off for storing when not in use.

To turn the AviTrac® off for storing when not in use:

oRecharge the battery completely

oTurn the 2 alarms off (“programmable”and “light”alarms) (See chap. IV. 3.)

The AviTrac® acoustic bird repeller should be used with caution in the presence of herds nearby, as

distress signals may cause unpredictable reactions from some animals.

The acoustic bird repeller may emit sound signals up to 120 dBA @ 1 meter. It is crucial not to stand in

front of the speaker(s) when it is emitting at maximum power.

The guarantee is not valid if the green plastic seal is not intact or if the memory card is replaced.

2. Sounds

Some sound signals may seem unusual; they are the result of considerable research on animal behavior.

Particular tones are accentuated because they are more efficient than others.

That signals are conceived to “confuse”pest animals. Indeed, they are recognized as stressful, but the birds,

unable to identify them or recognize them clearly, will end up tiring of them and will leave the protected area.

In the context of bird-scaring sounds, it is important to prevent the habituation effect. So it is necessary to vary

the sounds emitted, but also the intervals between each signal. Emit only when necessary in order to maintain

the efficiency of signals.

3. Battery charger and power supply

By default, your AviTrac® is delivered with a battery charger (ref 0911).

You can also choose a mains power supply (ref 0921) for use indoors or on fixed installation (more information

is available from your usual reseller).

Neither the battery charger nor the power supply is waterproof. They must be plugged and used in a clean and

dry place.

If you want to use your AviTrac® plugged into an outdoor power supply, you will have to use a waterproof

cable, available in 5 meters (ref 0961) or 10 meters (ref 0962). Please do not hesitate to ask your local

distributor for these references.

The charger comes with two lights that give you information about battery status:

Red light: Battery is charging; Green Light: Battery is charged

CAUTION: Always unplug the battery charger from the AviTrac® device and from the wall power outlet

once the battery is fully charged

contact@agriprotech.fr –Tel: +33 (0)2 98 96 08 12 - www.agriprotech.fr

III - Installation

1. Stainless steel stand

In your package, you find the parts needed to build the stainless steel chassis for your AviTrac® acoustic bird

repeller. It is composed of the following parts:

Part

Quantity

Illustration

Reference used

in the

illustrations

Left foot

(in yellow)

Right foot

(in blue)

Rails

(in orange)

Rear plate

(Already fixed to

electronic box)

1 sachet of screws

containing:

Hexagon nut M6

Base screw T.B.H.C.

(M6, length 10 mm)

contact@agriprotech.fr –Tel: +33 (0)2 98 96 08 12 - www.agriprotech.fr

Wing nut M6

To assemble the chassis, start by positioning the different elements as illustrated in the picture below:

Then screw the different parts together (B1 = hexagon nut and B2 = base screw):

Remark: It is advised to tighten the base screws (B2) with a 4 mm Allen wrench (see Picture 3), not supplied.

Picture 1 Position of the feet and rails

Picture 2 How to screw the different parts together

Picture 3 Allen wrench

contact@agriprotech.fr –Tel: +33 (0)2 98 96 08 12 - www.agriprotech.fr

For simplicity, the electronic box is not visible in the below picture (Picture 4: B2 = Base screw and B3 = Wing

nut). As the electronic box is already screwed to the rear plate, simply screw the remaining part (rear plate -

A4) to the chassis, assembled in the previous step.

2.a Installation of the speaker for AviTrac® 9M and 18M

Make sure the speaker is stabilized on the top of the rear plate (above the central hole, Picture 5) and screw the

screw B2 to wing nut B3 as shown in the illustrations below (Picture 6 and Picture 7). It is advised to make the

speaker cable point downwards in order to reduce the risk of water infiltration into the input sockets.

Picture 5. Hole for speaker on AviTrac® 9M and 18M

Picture 6. Speaker for AviTrac® 9M

Picture 7. Wing nut position and speaker screw

a. Top view, b. Bottom view

Picture 4 Screw the rear plate to the feet and rails

contact@agriprotech.fr –Tel: +33 (0)2 98 96 08 12 - www.agriprotech.fr

2.b Installation of speaker for AviTrac® 18S

Make sure the speakers are stabilized on the top of the rear plate (above the central hole, Picture 8) and screw

the screw B2 to wing nut B3 as shown in the illustrations below (Picture 9 and 10). It is advised to make the

speaker cables point downwards in order to reduce the risk of water infiltration into the input sockets.

Picture 8. Holes for speaker on AviTrac® 18M

Picture 9. Speakers for AviTrac® 18M

Picture 10. Wing nut position and speaker screw

a. Top view, b. Bottom view

Once the speakers are mounted on the rear plate, the Y-

shaped cable can be connected to them (Picture 11 and

12).

Picture 11:

a. This connector has to be plugged into the side of the

box, in output socket n° 5 in the overall structure

diagram p.-4

b. and c. Each of these connectors has to be linked to a speaker cable.

Picture 11 Y-shaped cable

Picture 12 How to connect Y-shaped cable to your AviTrac®

contact@agriprotech.fr –Tel: +33 (0)2 98 96 08 12 - www.agriprotech.fr

IV - Programming

1. Screen and keyboard

The AviTrac® acoustic bird repeller is programmed via its

screen and its two buttons. The 2 buttons are named Select

and OK (Picture 13).

2. Switching on the device

The activation of scaring signals can be programmed in two ways:

a. With the “programmable”alarm, you can choose the start and end times of sound emissions.

b. With the “luminosity”alarm, the signals activate at sunrise and stop at the end of the day,

thanks to the luminosity sensor on the electronic module.

Caution: To avoid the emission of unwanted sound signals, it is important to choose ONE alarm: either the

“programmable”alarm or the “luminosity”alarm.

To start programming the device, press and hold the OK button for 4 seconds (until the AviTrac® screen lights

up). You can access the menu quickly by pressing the OK button again. Information about the device

identification (version of the device and software) appears. You can switch back from this screen by pressing

on the OK button again.

The “Menu”screen appears and indicates if the “programmable”

(a. in the picture opposite) and “luminosity”alarms (b. in the

picture opposite) are active or inactive. Once in the “Home” menu,

press the Select button to browse between the different

programming pages.

The first “Status”screen gives you the following information on

your AviTrac® device:

Whether the memory card is inserted or not

Battery level in %

Battery level in mV

Luminosity in mV

You can press the Select button again to close this screen and browse the following menus.

Hint:

When browsing through the different menus, you can return to the Home menu by holding down the

Select button for a few seconds.

To stop a signal which is currently being emitted, just press the OK button.

Picture 13 Select and OK buttons

Andere Handbücher für AviTrac

Inhaltsverzeichnis

Andere AgriProTech Landwirtschaftliche Geräte Handbücher

AgriProTech

AgriProTech ManTrac Option Bedienungsanleitung

Beliebte Landwirtschaftliche Geräte Handbücher anderer Marken

GSi

GSi PNEG-2314 Bedienungsanleitung

Checchi & Magli

Checchi & Magli TEXDRIVE Bedienungsanleitung

Amazone

Amazone Cenius 4003-2TX Bedienungsanleitung

MASSEY FERGUSON

MASSEY FERGUSON MF 9313S Bedienungsanleitung

Cima

Cima BLITZ Bedienungs- und Wartungsanleitung

Amazone

Amazone CombiDisc 3000 Montageanleitung

HE-VA

HE-VA Disc-Roller XL Contour Bedienungsanleitung

AGT

AGT AGT-SSFM Bedienungsanleitung

Milestone

Milestone 72-84 Bedienungsanleitung

KUHN

KUHN Hector 3000 Bedienungsanleitung

Krone

Krone X-Disc 6200 Bedienungsanleitung

Eliet

Eliet DZC450 Bedienungsanleitung

Taarup

Taarup BIO+ B4000 Bedienungsanleitung

Garland

Garland SHAKER 310 DPG Bedienungsanleitung

stable comfort

stable comfort StableWall System Bedienungsanleitung

Raven

Raven AccuBoom Bedienungsanleitung

International

International 710 Bedienungsanleitung

Ashland

Ashland HDW-3217-14 Bedienungsanleitung