GSi PNEG-2314 Bedienungsanleitung

Direct Gear Drive Power Sweep

Retrofit Wheel Kit

Models:

8" AND 10" SD DGD BIN SWEEP (15' - 48')

10" HD DGD BIN SWEEP (30' - 72')

Installation Manual

PNEG-2314

Version 1.0

Date: 06-26-20

PNEG-2314

All information, illustrations, photos, and specifications in this manual are based on the latest

information available at the time of publication. The right is reserved to make changes at any

time without notice.

2PNEG-2314 DGD Retrofit Sweep Wheel Kit Installation

Contents

Chapter 1 Safety Precautions ....................................................................................................................5

Safety Guidelines........................................................................................................................5

Cautionary Symbol Definitions......................................................................................................6

Safety Cautions...........................................................................................................................7

Safety Sign-off Sheet.................................................................................................................10

Chapter 2 Retrofit Sweep Wheel Kit Installation for Standard Duty.......................................................... 11

Chapter 3 Retrofit Sweep Wheel Kit Installation for Heavy Duty ..............................................................19

Chapter 4 Parts List.................................................................................................................................25

Retrofit Sweep Wheel Kit Parts - Standard Duty...........................................................................25

Retrofit Sweep Wheel Kit Parts - Heavy Duty...............................................................................26

Limited Warranty — N.A. Grain Products ................................................................................27

PNEG-2314 DGD Retrofit Sweep Wheel Kit Installation 3

NOTES

4PNEG-2314 DGD Retrofit Sweep Wheel Kit Installation

1Safety Precautions

Topics Covered in this Chapter

▪ Safety Guidelines

▪ Cautionary Symbol Definitions

▪ Safety Cautions

▪ Safety Sign-off Sheet

Safety Guidelines

Safety guidelines are general-to-specific safety rules that must be followed at all times. This manual is

written to help you understand safe operating procedures and problems that can be encountered by the

operator and other personnel when using this equipment. Read and save these instructions.

As owner or operator, you are responsible for understanding the requirements, hazards, and precautions

that exist and to inform others as required. Unqualified persons must stay out of the work area at all

times.

Alterations must not be made to the equipment. Alterations can produce dangerous situations resulting in

SERIOUS INJURY or DEATH.

This equipment must be installed in accordance with the current installation codes and applicable regula-

tions, which must be carefully followed in all cases. Authorities having jurisdiction must be consulted

before installations are made.

When necessary, you must consider the installation location relative to electrical, fuel and water utilities.

Personnel operating or working around equipment must read this manual. This manual must be delivered

with equipment to its owner. Failure to read this manual and its safety instructions is a misuse of the

equipment.

ST-0001–4

PNEG-2314 DGD Retrofit Sweep Wheel Kit Installation 5

Chapter 1: Safety Precautions

Cautionary Symbol Definitions

Cautionary symbols appear in this manual and on product decals. The symbols alert the user of potential

safety hazards, prohibited activities and mandatory actions. To help you recognize this information, we

use the symbols that are defined below.

Table 1-1 Description of the different cautionary symbols

Symbol Description

This symbol indicates an imminently hazardous situation which, if

not avoided, will result in serious injury or death.

This symbol indicates a potentially hazardous situation which, if not

avoided, can result in serious injury or death.

This symbol indicates a potentially hazardous situation which, if not

avoided, can result in minor or moderate injury.

This symbol is used to address practices not related to personal

injury.

This symbol indicates a general hazard.

This symbol indicates a prohibited activity.

This symbol indicates a mandatory action.

ST-0005–2

6PNEG-2314 DGD Retrofit Sweep Wheel Kit Installation

Chapter 1: Safety Precautions

Safety Cautions

Use Personal Protective Equipment

• Use appropriate personal protective equipment:

Eye

Protection

Respiratory

Protection

Foot

Protection

Hearing

Protection

Head

Protection

Fall

Protection

Hand

Protection

• Wear clothing appropriate to the job.

• Remove all jewelry.

• Tie long hair up and back.

ST-0004–1

Follow Safety Instructions

• Carefully read all safety messages in this manual and safety

signs on your machine. Keep signs in good condition.

Replace missing or damaged safety signs. Be sure new

equipment components and repair parts include the current

safety signs. Replacement safety signs are available from

the manufacturer.

• Learn how to operate the machine and how to use controls

properly. Do not let anyone operate without instruction.

• If you do not understand any part of this manual or need

assistance, contact your dealer.

ST-0002–1

Sharp Edge Hazard

• This product has sharp edges, which can cause serious

injury.

• To avoid injury, handle sharp edges with caution and always

use proper protective clothing and equipment.

ST-0036–2

PNEG-2314 DGD Retrofit Sweep Wheel Kit Installation 7

Chapter 1: Safety Precautions

Maintain Equipment and Work Area

• Understand service procedures before doing work. Keep

area clean and dry.

• Never service equipment while it is operating. Keep hands,

feet, and clothing away from moving parts.

• Keep your equipment in proper working condition. Replace

worn or broken parts immediately.

ST-0003–1

Operate Motor Properly

• All electrical connections must be made in accordance with

applicable local codes (National Electrical Code for the US,

Canadian Electric Code, or EN60204 along with applicable

European Directives for Europe). Make sure equipment and

bins are properly grounded.

• Lock-out power before resetting motor overloads.

• Do not repetitively stop and start the drive in order to free a

plugged condition. Jogging the drive in this manner can

damage the equipment and drive components.

ST-0009–3

Rotating Auger Hazard

• Keep clear of rotating augers and

moving parts.

• Do not remove or modify guards or

covers.

• Lock-out power source before making

adjustments, cleaning, or maintaining

equipment.

• Failure to follow these precautions will

result in serious injury or death.

ST-0037–1

Stay Clear of Hoisted Equipment

• Always use proper lifting or hoisting equipment when assem-

bling or disassembling equipment

• Do not walk or stand under hoisted equipment.

• Always use sturdy and stable supports when needed for

installation. Not following these safety precautions creates

the risk of falling equipment, which can crush personnel and

cause serious injury or death.

ST-0047–1

8PNEG-2314 DGD Retrofit Sweep Wheel Kit Installation

Chapter 1: Safety Precautions

Stay Clear of Rotating Parts

• Do not enter the bin while the equipment

is in operation.

• Entanglement in rotating augers will

cause serious injury or death.

• Keep all guards and covers in place at

all times.

• Lock-out power source before making

adjustments, cleaning, or maintaining

equipment.

ST-0008–2

Use Unload Equipment Properly

• Do not operate this equipment alone. Make sure someone

nearby is aware of the proper shut down sequence in the

event of an emergency.

• Do not allow any person intoxicated or under the influence of

drugs to operate this equipment. All operators must be

adequately rested and prepared to perform all functions of

operating the equipment.

• Do not start equipment until all persons are clear of the work

area and safety guards are in place.

• Do not allow anyone inside a bin, truck, or wagon which is

being unloaded by an auger. Flowing grain can trap and suf-

focate in seconds.

• Use ample overhead lighting after sunset to light the work

area.

• Always use caution to not hit the auger when positioning the

load.

• Do not leave equipment operating while unattended.

• Be aware of pinch points, which can trap or catch objects

and cause injury.

• Be sure all equipment is locked in position before operating.

• Always lock out all power sources to the equipment when

unloading is finished.

ST-0051–1

PNEG-2314 DGD Retrofit Sweep Wheel Kit Installation 9

Chapter 1: Safety Precautions

Safety Sign-off Sheet

Below is a sign-off sheet that can be used to verify that all personnel have read and understood the safety

instructions. This sign-off sheet is provided for your convenience and personal record keeping.

Date Employee Name Supervisor Name

ST-0007

10 PNEG-2314 DGD Retrofit Sweep Wheel Kit Installation

Inhaltsverzeichnis

Andere GSi Landwirtschaftliche Geräte Handbücher

GSi

GSi 40 Series Gebrauchsanweisung

GSi

GSi 40 Series Bedienungsanleitung

GSi

GSi TopDry Batchflow 30 FT Gebrauchsanweisung

GSi

GSi 30' BINS Bedienungsanleitung

GSi

GSi Cumberland Hi-Lo Bedienungsanleitung

GSi

GSi 40 Series Gebrauchsanweisung

GSi

GSi Design III Series Bedienungsanleitung

GSi

GSi PNEG-2113 Bedienungsanleitung

GSi

GSi GRA Bedienungsanleitung

GSi

GSi Sweep II Series Installationsanleitung

GSi

GSi TopDry Gebrauchsanweisung

GSi

GSi FFI SCR Bedienungsanleitung

GSi

GSi PNEG-1094 Bedienungsanleitung

GSi

GSi 2000 Series Bedienungsanleitung

GSi

GSi GrainVue Bedienungsanleitung

GSi

GSi AIRSTREAM Bedienungsanleitung

GSi

GSi PNEG-1724 Bedienungsanleitung

GSi

GSi Vision Watchdog Bedienungsanleitung

GSi

GSi 40 Series Bedienungsanleitung

GSi

GSi 40 Series Gebrauchsanweisung

GSi

GSi BFT Series Bedienungsanleitung

GSi

GSi 40 Series Gebrauchsanweisung

GSi

GSi PNEG-2105 Bedienungsanleitung

GSi

GSi TopDry TD-101164 Bedienungsanleitung

Beliebte Landwirtschaftliche Geräte Handbücher anderer Marken

Checchi & Magli

Checchi & Magli TEXDRIVE Bedienungsanleitung

Amazone

Amazone Cenius 4003-2TX Bedienungsanleitung

MASSEY FERGUSON

MASSEY FERGUSON MF 9313S Bedienungsanleitung

Cima

Cima BLITZ Bedienungs- und Wartungsanleitung

Amazone

Amazone CombiDisc 3000 Montageanleitung

HE-VA

HE-VA Disc-Roller XL Contour Bedienungsanleitung

AGT

AGT AGT-SSFM Bedienungsanleitung

Milestone

Milestone 72-84 Bedienungsanleitung

KUHN

KUHN Hector 3000 Bedienungsanleitung

Krone

Krone X-Disc 6200 Bedienungsanleitung

Eliet

Eliet DZC450 Bedienungsanleitung

Taarup

Taarup BIO+ B4000 Bedienungsanleitung

Garland

Garland SHAKER 310 DPG Bedienungsanleitung

stable comfort

stable comfort StableWall System Bedienungsanleitung

Raven

Raven AccuBoom Bedienungsanleitung

International

International 710 Bedienungsanleitung

Ashland

Ashland HDW-3217-14 Bedienungsanleitung

TURF TANK

TURF TANK One+ Bedienungsanleitung