AIPTEK AN100 Bedienungsanleitung

User’s Manual

Welcome

Thank you for purchasing this product. Before you start, we

recommend that you read this manual step by step to get the

most out of your new mobile projector. We hope you enjoy it

as much as we did designing it.

About the product

The device is powered by the Android OS. This ensures the

mobile projector provides you with a complete computing

experience where you can access a cloud and stream images

and videos. Browse websites and view documents wirelessly

whilst projecting content up to 120’’ (300 cm) in size. It is the

ideal mobile companion for use in business and

entertainment.

Safety Notice

1. Keep the device and packaging materials out of the reach

of infants and children.

2. Avoid subjecting the power adapter and other contacts to

dripping or splashing water and dry your hands before you

use it. Do not place objects filled with liquids such as vases,

etc. on or near the device.

3. Make sure that the used power outlet is always readily

available and never hidden. In case of emergency, use the

power adapter to separate the device from the power

network.

4. Keep your device away from all flames such as candles

and do not set them up within the vicinity of the device.

5. Keep the unit at least 10 cm away from other objects. Make

sure the ventilation is not covered by newspapers,

tablecloths, curtains, etc.

6. For your own safety, do not use the projector during

thunderstorms or lightning.

User’s Manual

7. Ensure that the operating environment temperature is

within 5 ~ 35°C and relative humidity is 20% ~ 80%,

non-condensing.

8. The battery is integrated with the device. Do not dissemble

and modify. The battery should be replaced by an

authorized service center only.

9. Wait before using if the device has been moved from a cold

location into a warm one. Any condensation that has

formed may in certain circumstances destroy the device. As

soon as the device has reached room temperature it can be

used without risk.

10.Handle the product with care. Avoid contact with sharp

objects. Keep device away from metallic objects.

11.Place the projector on a flat surface. Any collision or falling

to the ground is likely to damage the product.

12.Do not drop or disassemble the product otherwise the

warranty will void. Opening or removing covers may expose

you to dangerous voltage or other hazards. Refer all

servicing to an authorized service center.

13.Use only the accessories supplied by the manufacturer.

14.Both product and user’s manual are subject to further

updates, modifications or supplement without further

notice.

Care and Safety Information for Pico

Projectors

1. Avoid facing directly into the

projector’s lens.

2. During the operation, this product

may heat lightly, which is normal.

3. The device should not be used in

a very dusty environment. Dust

particles and other foreign objects may damage the unit.

4. Do not expose the device to extreme vibrations. It may

damage the internal components.

User’s Manual

5. Use the enclosed power adapter (see technical data):

Check whether the mains voltage of the power supply

matches the mains voltage available at the setup location.

This equipment complies with the voltage type specified on

the unit.

Notice for Prolonged and Lengthy

Projection

The built-in battery supports approximately 80 mins of

projection. For extended projection periods, it is

recommended to use the AC adapter.

When the battery level reaches to low, the low battery

capacity icon ( ) will flash. To continue using the product,

you must charge the projector utilizing the AC adapter when

the icon is flashing.

The CE marking certifies that the product

meets the main requirements of the European

Parliament and Councils directives 1999/5/EC

on information technology equipment,

regarding safety and health of users and regarding

electromagnetic interference.

The declaration of compliance can be consulted on the site

www.aiptek.de

Avoid Hearing Damage:

Listening at high volume for a

long period of time could cause

damage to your ears.

User’s Manual

FCC Compliance Statement:

This device complies with Part 15 of the FCC

Rules. Operation is subjected to the following

two conditions: (1) this device may not cause

harmful interference, and (2) this device must

accept any interference received, including

interference that may cause undesired operation.

This equipment has been tested and found to comply with limits for

a Class B digital device, pursuant to Part 15 of the FCC rules.

These limits are designed to provide reasonable protection against

harmful interference in residential installations. This equipment

generates, uses, and can radiate radio frequency energy, and if not

installed and used in accordance with the instructions, may cause

harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause interference to

radio or television equipment reception, which can be determined

by turning the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Move the equipment away from the receiver.

-Plug the equipment into an outlet on a circuit different from that

to which the receiver is connected.

-Consult the dealer or an experienced radio/television technician

for additional suggestions.

For product available in the USA/Canada market, only channel

1~11 can be operated. Selection of other channels is not possible.

This device and it's antennas(s) must not be co-located or operating

in conjunction with any other antenna or transmitter except in

accordance with FCC multi-transmitter product procedures.

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set

forth for an uncontrolled environment. This equipment should be

installed and operated with minimum distance 20cm between the

radiator & your body.

User’s Manual

All cables used to connect peripherals must be shielded and

grounded. Operation with cables connected to peripherals that are

not shielded and grounded may result in interference to radio and

television reception.

You are cautioned that any change or modifications to the

equipment not expressly approved by the party responsible for

compliance could void your authority to operate such equipment.

Packaging: The presence of the logo (green dot)

means that a contribution is paid to an approved

national organization to improve package

recovery and recycling infrastructures. Please

respect the sorting rules set up locally for this kind of waste.

Batteries: If your product contains batteries, they must be

disposed of at an appropriate collection point.

The crossed-out waste bin stuck on the product

means that the product belongs to the family of

electrical and electronic equipment. In this

respect, the European regulations ask you to

dispose of it selectively;

At sales points in the event of the purchase of similar

equipment.

At the collection points made available to you locally

(drop-off center, selective collection, etc.).

In this way you can participate in the re-use and upgrading of

Electrical and Electronic Equipment Waste, which can have

an effect on the environment and human health.

The paper and cardboard packaging used can be disposed of

as recyclable paper. Have the plastic wrapping recycled or

dispose of it in the non-recyclable waste, depending on the

requirements in your country.

User’s Manual

Return

Get to know your Mobile Projector

Control Panel

IR Receiver

SD card slot

USBconnector

Earphone Jack

Focus Ring

Projection Lens

Speaker

On/Off

Vents

DC-in

Right

Reset Hole

Left

Back to

Home

Down

User’s Manual

Package Contents

Mobile Projector

Power Adapter

Power Plugs

TriPod

Remote Control

User Manual

Charging the product

The projector is built with an embedded battery for mobile use.

Please charge the projector for 5 hours prior to its first use.

Repeat charging will take around 3 hours.

The battery will be charged only when the projector is not in

use (Power off). Connect one end of the supplied power

adapter to DC IN jack and the other end to a power outlet to

start charging.

Exchange the plug (EU, US & UK etc.) of AC adapter that

accommodates the type of power outlet in your country.

Charging a mobile device

Ensure the mobile projector is turned on. Plug the USB

charging cable into the USB connector and the other end into

the device.

User’s Manual

Charging LED Indicator

During charging, the LED of Power On button will flash. When

the battery is fully charged, the LED turns to solid blue.

Power On / Off

Push the Power button for 2 seconds to turn on the projector.

Push the Power button again for 3 seconds to turn off the

projector.

Adjusting the

Focus

Place the projector on a

flat surface and toward a

wall or a projection screen.

Adjust the focus by turning

the focus ring to get a

sharp and clear picture.

Note: Use a tripod to increase the height of the projectional

image when necessary. The tripod socket is located under the

projector.

Main Screen

Power on the projector, the following screen appears after the

projector boots up.

User’s Manual

Projecting from external storage devices

Content stored in an external storage can be projected via a

USB wired connection.

Projecting from a Smartphone

In order to project your Smartphone screen, you must connect

your device with one of the two following embedded apps

within your projector.

For iOS devices, please use HappyCast

For Android devices, please use WiFiDisplay

User’s Manual

Troubleshooting

Symptom

Check Point

The projector still can’t be

turned on after 10

seconds of waiting.

Ensure the battery is fully

charged.

The projected image is

blurred.

1. Adjust the focus. Please refer

to “Adjusting the Focus”.

2. Check if the lens is dirty.

The temperature of the

projector’s surface is

warm.

It is normal for this projector to

generate moderate heat during

operation.

The projected image is

too dark.

1. Use the projector in a darker

environment.

2. Increase the brightness by

using the power adapter.

3. Scale down the projectional

image size.

Recovering from

abnormal

If the projector is running

slow, freezing, crashing or

locking up during the

operation, you can try to insert

a slim, pointy object into the

reset hole to trigger a

hardware reset.

Inhaltsverzeichnis

Sprachen:

Andere AIPTEK Projektor Handbücher

AIPTEK

AIPTEK PocketCinema T10 Bedienungsanleitung

AIPTEK

AIPTEK MobileCinema i55 Bedienungsanleitung

AIPTEK

AIPTEK PocketCinema Z20 Bedienungsanleitung

AIPTEK

AIPTEK MobileCinema A50P Bedienungsanleitung

AIPTEK

AIPTEK PocketCinema V20 Bedienungsanleitung

AIPTEK

AIPTEK PocketCinema V10 Kurzanleitung

AIPTEK

AIPTEK RV7001 Bedienungsanleitung

AIPTEK

AIPTEK PocketCinema T20 Bedienungsanleitung

AIPTEK

AIPTEK PocketCinema V150W Bedienungsanleitung

AIPTEK

AIPTEK PocketCinema V100 Bedienungsanleitung

AIPTEK

AIPTEK MobileCinema i400 Bedienungsanleitung

AIPTEK

AIPTEK Pico Bedienungsanleitung

AIPTEK

AIPTEK MobileCinema i20 Plus Bedienungsanleitung

AIPTEK

AIPTEK MobileCinema i15 Bedienungsanleitung

AIPTEK

AIPTEK PocketCinema N100 Bedienungsanleitung

AIPTEK

AIPTEK PocketCinema Z20 Bedienungsanleitung

AIPTEK

AIPTEK POCKETCINEMA V50 Bedienungsanleitung

AIPTEK

AIPTEK PocketCinema V10 Bedienungsanleitung

AIPTEK

AIPTEK MobileCinema i50S Bedienungsanleitung

AIPTEK

AIPTEK POCKETCINEMA T25 Bedienungsanleitung

AIPTEK

AIPTEK PocketCinema V10 Administratorhandbuch

AIPTEK

AIPTEK PocketCinema T15 Bedienungsanleitung

AIPTEK

AIPTEK PocketCinema V20 Bedienungsanleitung

AIPTEK

AIPTEK PocketCinema T20 Bedienungsanleitung

Beliebte Projektor Handbücher anderer Marken

iEmmet

iEmmet MP-312 Bedienungsanleitung

Epson

Epson VS400 Bedienungsanleitung

Sony

Sony VPL-HS10 Marketing Specifications & Features Bedienungsanleitung

Sony

Sony VPL-HW65ES Service-Handbuch

Toshiba

Toshiba TLP-791U Bedienungsanleitung

Philips

Philips LC1341 Referenzhandbuch

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Bedienungsanleitung

NEC

NEC NP600S EDU Bedienungsanleitung

BenQ

BenQ SH753P Bedienungsanleitung

Eiki

Eiki EK-623U series Bedienungsanleitung

Epson

Epson PowerLite Pro Cinema 6020UB Bedienungsanleitung

Epson

Epson PowerLite Home Cinema 705HD Bedienungsanleitung

Christie

Christie LHD700 Bedienungsanleitung

Navitar

Navitar FX Bedienungsanleitung

InFocus

InFocus LitePro 560 Bedienungsanleitung

Sony

Sony SRX-R815P Bedienungsanleitung

Vivitar

Vivitar DP1500 X Bedienungsanleitung

Acer

Acer C20 Series Bedienungsanleitung