AIPTEK i1200 Bedienungsanleitung
Page 1
User’s Manual
1
EN
Welcome
Thank you for purchasing this product. Please read this manual thoroughly before use
and retain it for future reference. We are confident you will enjoy this product and its
many functions.
About the product
Featuring integrated WLAN, this Pico projector provides cable-free connections from
your notebook, tablet or smartphone and streams content such pictures, videos,
websites, and documents wirelessly and projecting the images up to 120’’ (300 cm) in
size. With its powerful wireless functionality and versatile connection options including
HDMI and Audio-Out, this Pico projector is the best solution for mobile use in business
and entertainment.
Safety Notice
1. Keep the device and packaging materials out of the reach of infants and children.
2. Avoid subjecting the power adapter and other contacts to dripping or splashing
water and dry your hands before you use it. Do not place objects filled with liquids
such as vases, etc. on or near the device.
3. Make sure that the used power outlet is always readily available and never hidden.
In case of emergency, use the power adapter to separate the device from the power
network.
4. Keep your device away from all flames such as candles and do not set themup
within the vicinity of the device.
5. Keep the unit at least 10 cm away from other objects. Make sure the ventilation is
not covered by newspapers, tablecloths, curtains, etc.
6. For your own safety, do not use the projector during thunderstorms or lightning.
7. Ensure that the operating environment temperature is within 5 ~ 35°C and relative
humidity is 20% ~ 80%, non-condensing.
8. The battery is integrated with the device. Do not dissemble and modify. The battery
should be replaced by an authorized service center only.
9. Wait before using if the device has been moved from a cold location into a warm one.
Any condensation that has formed may in certain circumstances destroy the device.
As soon as the device has reached room temperature it can be used without risk.
10. Handle the product with care. Avoid contact with sharp objects. Keep device away
from metallic objects.
11. Place the projector on a flat surface. Any collision or falling to the ground is likely to
damage the product.
12. Do not drop or disassemble the product otherwise the warranty will void. Opening or
removing covers may expose you to dangerous voltage or other hazards. Refer all
servicing to an authorized service center.
FCC ID: 2AHTC-I1200
User’s Manual
2
EN
13. Use only the accessories supplied by the manufacturer.
14. Both product and user’s manual are subject to further updates, modifications or
supplement without further notice.
Care and Safety Information for Pico Projectors
1. Avoid facing directly into the projector’s lens.
2. During the operation, this product may heat
lightly, which is normal.
3. The device should not be used in a very
dusty environment. Dust particles and other
foreign objects may damage the unit.
4. Do not expose the device to extreme
vibrations. It may damage the internal
components.
5. Use the enclosed power adapter (see technical data):
Check whether the mains voltage of the power supply matches the mains voltage
available at the setup location. This equipment complies with the voltage type
specified on the unit.
Notice for Prolonged and Lengthy Projection
The built-in battery supports approximately 120 mins of projection. For extended
projection periods, it is recommended to use the AC adapter.
When the battery level reaches to low, the low battery capacity icon ( ) will flash.
To continue using the product, you must charge the projector utilizing the AC
adapter when the icon is flashing.
It is normal that the projector will feel warm with continuous use due to its high
performance. If you wish to project for a prolonged period of time, ensure there is
good ventilation to dissipate the build up of heat within the device.
Avoid Hearing Damage:
Listening at high volume for a
long period of time could cause
damage to your ears.
Page 3
User’s Manual
3
EN
The CE marking certifies that the product meets the main requirements of the European
Parliament and Councils directives EN55032/EN55024 on information technology
equipment, regarding safety and health of users and regarding electromagnetic
interference.
The declaration of compliance can be consulted on the site www.aiptek.de.
Packaging: The presence of the logo (green dot) means that a contribution is paid to an
approved national organization to improve package recovery and recycling
infrastructures. Please respect the sorting rules set up locally for this kind of waste.
Batteries: If your product contains batteries, they must be disposed of at an appropriate
collection point.
The crossed-out waste bin stuck on the product means that the product belongs to the
family of electrical and electronic equipment. In this respect, the European regulations
ask you to dispose of it selectively;
At sales points in the event of the purchase of similar equipment.
At the collection points made available to you locally (drop-off center, selective
collection, etc.).
In this way you can participate in the re-use and upgrading of Electrical and Electronic
Equipment Waste, which can have an effect on the environment and human health.
The paper and cardboard packaging used can be disposed of as recyclable paper. Have
the plastic wrapping recycled or dispose of it in the non-recyclable waste, depending on
the requirements in your country.
User’s Manual
4
EN
FCC Compliance Statement:
This device complies with Part 15 of the FCC Rules. Operation is
subjected to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with limits for a Class B digital
device, pursuant to Part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in residential installations. This
equipment generates, uses, and can radiate radio frequency energy, and if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause interference to radio or television equipment reception,
which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Move the equipment away from the receiver.
-Plug the equipment into an outlet on a circuit different from that to which the receiver
is connected.
-Consult the dealer or an experienced radio/television technician for additional
suggestions.
For product available in the USA/Canada market, only channel 1~11 can be operated.
Selection of other channels is not possible.
This device and it's antennas(s) must not be co-located or operating in conjunction with
any other antenna or transmitter except in accordance with FCC multi-transmitter
product procedures.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance
20cm between the radiator & your body.
All cables used to connect peripherals must be shielded and grounded. Operation with
cables connected to peripherals that are not shielded and grounded may result in
interference to radio and television reception.
You are cautioned that any change or modifications to the equipment not expressly
approved by the party responsible for compliance could void your authority to operate
such equipment.
Page 5
User’s Manual
5
EN
Package Contents
Mobile Projector
Power Adapter
Power Plugs
User’s Manual
Tripod
Knowing your Mobile Projector
Vents
Reset Hole
Earphone Jack
Focus Ring
Speaker
Tripod Socket
Brightness
Adjustment
Service Use
DC IN
Power
LED Indicator
HDMI Input
Connector
HDMI Output
Connector
Projection Lens
Volume Up
Volume Down
User’s Manual
6
EN
Getting Started
Charging the product
The projector is built with an
embedded battery for mobile use.
Please charge the projector for 5
hours prior to its first use. Repeat
charging will take around 3 hours.
The battery will be charged only
when the projector is not in use (Power off). Connect one end of the supplied power
adapter to DC IN jack and the other end to a power outlet to start charging.
Exchange the plug (EU, US etc.) of AC adapter that accommodates the type of power
outlet in your country.
Charging LED Indicator
During charging, the LED indicator lights will flash as marquee. While the battery is
fully charged, the LED indicator lights turns to solid blue.
LED indicators
LED Status
Indication
3 blue LEDs stay on
Power capacity is between 80% to 100%
2 blue LEDs stay on
Power capacity is between 45% to 80%
1 blue LED stays on
Power capacity is between 10% to 45%
1 blue LED blinks
Power capacity is below 10%
LED Marquee
Projector is being charged
Power On / Off / Standby
Push the Power button for 2 seconds to turn on the projector.
Push the Power button again for 3 seconds to turn off the projector.
Standby mode: Push the Power button for 1 second to turn on / off the projector
lamp to save the battery and system reboot time. (The LEDs are still on when the
projector is in standby mode.)
Adjusting the Focus
Place the projector on a flat surface and toward a
wall or a projection screen. Adjust the focus by
turning the focus ring to get a sharp and clear
picture.
Note: Use a tripod to increase the height of the projectional image when necessary.
The tripod socket is located under the projector.
User’s Manual
Page 7
7
EN
Adjusting the brightness of projector
There is a brightness adjustment button on the top of the projector. It allows you
to change the brightness.
Main Screen
Power on the projector, the following screen appears after the projector boots up.
For first-time use, please install the wireless application software first, on your PC or
smartphone.
http://www.iezvu.com/download
Wireless projecting via Apple Airplay (iOS10)
1. Tap Setting -> WiFi to connect iPhone to Projector-xxxxxxxx shown on the top of
projection screen.
2. Swipe up from the bottom bezel of the screen on your iPhone to bring up Control
Center.
Mode
Brightness
Battery Power
(HDMI mode)
Normal
High
70 mins
Eco
Low
110 mins
User’s Manual
8
EN
3. Tap on “AirPlay Mirroring” then choose “ Projector-xxxxxxxx”.
4. After connection, the screen has been mirror-projecting.
*iOS device can project via Ezcast APP also, the operation is same as an Android
device.
5. During projection, the smartphone can access cloud via 3G/4G network. It also can
be done through the projector to link to a wireless network for cloud access.
6. To connect the projector to a wireless network can support mirror projection and
internet access. Tap shown on the EZCast screen in the left top corner,
Then, tap "Settings" and use the keypad displayed the mobile device to connect
the projector to an available wireless network. The detail operation can be
referred to “Connect the projector to Wi-Fi network for Internet
access.”
User’s Manual
Page 9
9
EN
Projecting from the wireless application software
on Android devices
EZCast is an application that runs on your Android smartphone or iOS devices and
transmits still images or presentations to the projector. The EZCast is only used for a
wireless connection.
1. Download and install the free EZCast app. Refer to the section of Main Screen.
2. Run EZCast after installation then click shown on screen in right top corner
to search projector.
3. Choose WiFi Projector (Name as SSID shown on the top of projection screen)
and enter the Login password shown on the projector screen as well. After
connecting to the projector a blue connection icon will be shown on projection
screen in right top corner
4. To connect the projector to a wireless network can support mirror projection and
internet access. Tap shown on the EZCast screen in the left top corner, Then,
User’s Manual
10
EN
tap "Settings" and use the keypad displayed the mobile device to connect the
projector to an available wireless network. The detail operation can be referred to
“Connect the projector to Wi-Fi network for Internet access”.
5. After connection, tap “Mirror”On to mirror screen to projector. For EZCast user
manual, please refer :
http://www.iezvu.com/download/EZCast-User-Manual.pdf。
EZMirror projection for Android MiraCast
devices
EZMirror is the function of EZCast app and fully compatible with Miracast, you can
click the EZMirror button in EZCast to Miracast mode.
1. Link with Projector-xxxxxxxx in Wi-Fi setting of Android device then open EZCast
app to click <EZMirror> icon from the menu of . Projection screen will turn to
the EZMirror screen.
2. Tap “ON”button shown on the screen. Once you turn it on, there is 60 seconds
countdown for your mobile phone to connect with projector. Please enable
Miracast function in smartphone setting page.
Inhaltsverzeichnis
Andere AIPTEK Projektor Handbücher
AIPTEK
AIPTEK POCKETCINEMA V50 Bedienungsanleitung
AIPTEK
AIPTEK MobileCinema i400 Bedienungsanleitung
AIPTEK
AIPTEK PocketCinema Z20 Bedienungsanleitung
AIPTEK
AIPTEK PocketCinema V150W Bedienungsanleitung
AIPTEK
AIPTEK POCKETCINEMA V50 Bedienungsanleitung
AIPTEK
AIPTEK PocketCinema T20 Bedienungsanleitung
AIPTEK
AIPTEK PocketCinema T10 Bedienungsanleitung
AIPTEK
AIPTEK MobileCinema i50S Bedienungsanleitung
AIPTEK
AIPTEK MobileCinema A50P Bedienungsanleitung
AIPTEK
AIPTEK PocketCinema T15 Bedienungsanleitung
AIPTEK
AIPTEK MobileCinema i15 Bedienungsanleitung
AIPTEK
AIPTEK AN100 Bedienungsanleitung
AIPTEK
AIPTEK MobileCinema i50D Bedienungsanleitung
AIPTEK
AIPTEK Pico Bedienungsanleitung
AIPTEK
AIPTEK PocketCinema N100 Bedienungsanleitung
AIPTEK
AIPTEK MobileCinema i55 Bedienungsanleitung
AIPTEK
AIPTEK PocketCinema V10 Administratorhandbuch
AIPTEK
AIPTEK POCKETCINEMA T25 Bedienungsanleitung
AIPTEK
AIPTEK MobileCinema i400 Bedienungsanleitung
AIPTEK
AIPTEK PocketCinema V100 Bedienungsanleitung
Beliebte Projektor Handbücher anderer Marken
Panasonic
Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Bedienungsanleitung
NEC
NEC NP600S EDU Bedienungsanleitung
BenQ
BenQ SH753P Bedienungsanleitung
Eiki
Eiki EK-623U series Bedienungsanleitung
Epson
Epson PowerLite Pro Cinema 6020UB Bedienungsanleitung
Epson
Epson PowerLite Home Cinema 705HD Bedienungsanleitung
