Akaso CS300 Bedienungsanleitung
USER MANUAL
AKASO Wire-Free Security Camera CS300
WHAT’S IN THE BOX
AKASO CS300
Quick Start GuideReset PinDrill USB Power Cable
Magnetic Bracket
Wall Mount (White)
for Camera
Double Tape Mounting Screws Expansion Bolt
Bracket (Black)
for Solar Panel
Solar Panel
Quick Start Guide
AKASOWire-Free Security Camera CS300
CAMERA INTRODUCTION
1
2
3
4
5
Status Indicator
1
Lens
2
Microphone
3
PIR Motion Sensor
4
Speaker
5
DC 5V USB Port
8
Power Button
9
Reset Hole
10
6
7
8
9
10
Indicator Lights Status
Slow Blinking Red
Fast Blinking Red
Solid on Red
Solid on Blue
Slow Blinking Blue
Awaiting Wi-Fi connection, start adding devices
Wi-Fi searching
Network is abnormal
Wi-Fi connected, camera running normally
Wi-Fi connecting
Note: are under the rubber plug and the rubber is for waterproof.
78910
1 2
English
INSTALLATION
1. Bracket Installation
Drill three holes on the wall or ceiling, insert bolt into the hole and tighten to fix the
device. Put the camera on it and adjust the direction.
2. Solar Panel Installation
Drill two holes and insert screws. Align the hole on the back of solar panel. The solar
panel also can be placed on horizontal plane with two feet. Put the camera on it and
adjust the direction.
3. Magnetitic Bracket Installation
Drill one hole and insert screw. Align the hole on the back of magnetitic bracket.
Put the camera on it and adjust the direction.
SET-UP
Note: Camera can be charged through both USB cable and polar panel.
3 4
1. Install Phone App
Search for "Smart Life" app in App Store/Google play, or scan the QR code below
to download.
Download on the
App Store
GET IT ON
Google Play
Download the app from App Store Download the App from Google Play
5 6
2. Get a New Account
If you already have an account for Smart Life, please log in your account and skip to
step 4.
①Open “Smart Life” app to click “Register →Agree”. Choose country/region, fill in
the mobile number or Email.
United States of America +1
Mobile number/e-mail address
② Fill in email address or phone number, a verification code will be sent, please get
it and fill it in.
Enter Verification Code
Verification code has been sent to your mobile phone:
01-1******32, Resend (52s)
③Then set password, click “Done”.
Set Password
Done
④After registering the account, you need to add home information, click “(at the
left bottom)”, enter the "Home Management", click "Add Home" and fill in Home
name, location, add rooms, then click “Save” to add successfully.
Note:
• E-mail address or mobile phone number should be valid.
• The length of password must be within 6-20 characters, no special characters
included.
• Please choose the same country in register and login.
• If you forgot the password, click “Forget Password” to reset it.
3. Power on Camera
Press and hold the power button for 5 seconds to turn on camera. (If it cannot be
power on, plug in DC5V 1A/2A power adapter to charge the camera for 15 mins
first.) The camera is started successfully when the indicator light blinking slowly.
Note: DC5V 1A/2A power adapter is not included in packing list.
Power Button
30cm ~ 100cm
②Follow the instructions to ensure that the camera is activated. (The indicator light is
turning red and flashing slowly.)
4. Add Your Camera
①Bring the camera and your phone to the router within 1 to 3 feet (30 to 100 cm)
and connect Wi-Fi.
③ Choose Room, click “Add Device →Video Surveillance →Smart Camera →next
step →Enter Wi-Fi Password →Confirm →Continue”.
7 8
④ A QR code will be shown, just face the phone to the camera, after hearing the
beep, then click “I heard a Prompt”, see below picture.
9 10
Note: If you have downloaded “Akaso Smart” to link your cameras, please remove
cameras linked to Akaso Smart account and download “Smart Life” to link your
cameras again. (More details, please refer to the procedure “SET-UP”.)
1. Use Amazon Echo To Control
a. Configure the Amazon Echo device
(If you have already configured Amazon Echo, you can skip this step. The following
instructions are based on the iOS client.)
①Make sure your Amazon Echo device is powered on and connected to a Wi-Fi
network.
②Open the Alexa app on your phone. After successful login, tap on the menu in the
upper left corner of the Home page, select "Settings" and tap "Set Up A New
Device" to set up the Amazon Echo.
③Choose your Amazon Echo device type and language for connecting. Press and
hold the small dot on the device until the light turns yellow. Then tap "Continue"
to connect to the hotspot.
④After connecting to the Amazon Echo hotspot, return to the page. At this point,
the connection is successful. Tap "Continue" to proceed to the next step. Choose
a Wi-Fi network to connect to. Amazon Echo
will take a few minutes to try to connect to
the network.
b. Key step - link Skill
①Tap on "Skills" in the Alexa app menu.
USE THIRD PARTY DEVICES TO CONTROL
⑥Click camera icon to preview camera live video.
IPC
Direction
Screenshot
Alarm
Speak
Playback
HD
2020-02-07 13:51:48
Record
Signal: 91%
⑤Wait for the connection for about 30s, the device will be added successfully.
Name your camera and click the room where it is, click “Done”.
11 12
② Then search for "Smart Life". Tap "Enable to use" to enable the Skill.
③ Enter the Smart Life APP account and password, then tap “Link Now” to link your
Smart Life account to enable the Skill. Continue and tap “Discover the device” to
add your camera into the list. Then you can start your smart home journey.
2. Use Google Assistant To Control
a. Configure Google Home device
(If you have already configured Google Home, you can skip this step. The following
instructions are based on the iOS client)
①Make sure your Google Home device is powered on and connected to a Wi-Fi
network.
②Open the Google Home app on your phone. After successful login, tap on the
menu in the upper left corner and select "SET UP" to set up Google Home.
③It will notify you with a sound to ensure that you are connected to the correct
device. After you hear the sound, tap "YES" to proceed to the next step.
④ You can choose to differentiate the room where Google Home is located from
other Google devices. Then, select the Wi-Fi network and language, wait for the
system to complete the configuration, and tap "next".
⑤According to the page prompts, choose whether to agree to the corresponding
operation. When the page displays "Google Home is ready", select "continue" to
continue to the next step.
⑥Next is the voice control guide tutorial. Once you're done listening, tap "FINISH
SET UP." At this point, Google Home setup is comple.
b. Key step - link Action
① On the main page of the Google Home app,
tap the sidebar menu in the top left corner
and select "Set up device".
ADJUST PIR DETECTION DISTANCE
PIR “Body Detection” is on by default and the default sensitivity is “Mid”, but it is
adjustable. “My Device” - The detecting distance is 6 meters (20 feet).
Note: Higher sensitivity offers longer detecting distance, but it would lead to more
false alarms. You are advised to set up the sensitivity level to “Low” or “Medium”
when you install the camera outdoors.
Sensitivity Detection Distance (For moving and living things)
Up to 4 meters (13 feet)
Up to 6 meters (20 feet)
Up to 8 meters (26 feet)
Low
Medium
High
13 14
② Then tap the bottom “Have something already set up?” and search for "Smart
Life".
③Find Smart Life on the list and open it, select the country where your Smart Life
app account is located, enter your Smart Life
app account and password, and tap “Link Now".
④Enter the Smart Life app account and password, then tap “Link Now” to link your
Smart Life account. Choose the room where your device is located, and then the
skill will appear on the Home Control Devices list. Now you can begin your smart
home journey.
ALARM PUSH NOTIFICATION AND PLAYBACK
Battery camera with PIR sensor is not designed for 7*24 all day recording, but aims
at pushing alarm message notification to app and record video to microSD card
when PIR sensor detected human body motion events, then you can playback the
motion videos wherever you are via Smart Life.
When PIR triggered, camera and system actions:
1. Alarm Sound in App (please open permission for Smart Life notification in mobile
setting and turn mobile volume on).
2. Alarm Message Notification (Please enable Smart Life notification in mobile
setting).
Replay
2020-02-07 13:51:48
22:00 23:00 0:00 1:00 2:00 2:00
Calendar Record
Screenshot
BATTERY MANAGEMENT
1. If the battery capacity is less than 20%, the app will send an alarm message to
remind you to charge in time.
2. You can charge the camera with DC 5V/1A power adapter
3. If your battery is consumed too quickly, the possible cause is that the camera is
woken up too frequently. It is recommended to lower down the “Body Detection”
sensitivity or turn it off occasionally.
3. Alarm snapshot and video will be recorded on microSD card (please insert
microSDcard) or Cloud storage.
15 16
IPC
Direction
Screenshot
Alarm
Speak
Playback
HD
2020-02-07 13:51:48
Record
Signal: 91%
Andere Handbücher für CS300
1
Inhaltsverzeichnis
Sprachen:
Andere Akaso Sicherheitskamera Handbücher
Akaso
Akaso B60 Bedienungsanleitung
Akaso
Akaso IP13M903 Gebrauchsanweisung
Akaso
Akaso P50 Bedienungsanleitung
Akaso
Akaso CS300 Bedienungsanleitung
Akaso
Akaso B70 Bedienungsanleitung
Akaso
Akaso B70 Bedienungsanleitung
Akaso
Akaso P40 Bedienungsanleitung
Akaso
Akaso P40 Bedienungsanleitung
Akaso
Akaso P20 Bedienungsanleitung
Akaso
Akaso B60 Bedienungsanleitung
