Akaso P40 Bedienungsanleitung
USER MANUAL
AKASO P40 Wi-Fi Camera
INSTALLATION
English
1. Wall-Mounting: Use the included wall-mount plate and mounting screws to fix
the camera on a clean surface of wall/ceiling.
2. Place on flat surface:
Put the camera on a higher level plane, stable and no need to fix.
WHAT'S IN THE BOX?
Expansion Bolt
USB Power Cable
Wall-mount Plate
Power AdapterP40 Wi-Fi Camera
Reset Pin
Mounting Screws
Quick Start Guide
AKASO P30 Wi-Fi Camera
Quick Start Guide
1 2
SET-UP
1. Install Phone App
Search for "Smart Life" app in App Store/Google play, or scan the QR code below to
download.
Download on the
App Store
GET IT ON
Google Play
Download the app from
App Store
Download the App from
Google Play
2. Get a New Account
If you already have an account for Smart Life, please log in your account and skip to
step 4.
①Open “Smart Life” app to click “Register →Agree”. Choose country/region, fill in
the email address.
United States of America
Email
② Fill in email address, a verification code will be sent, please get it and fill it in.
Enter Verification Code
③Then set password, click “Done”.
Set Password
Done
④After registering the account, you need to add home information, click “(at the
left bottom)”, enter the "Home Management", click "Add Home" and fill in Home
name, location, add rooms, then click “Save” to add successfully.
Note:
• Email address should be valid.
• The length of password must be within 6-20 characters, no special characters
included.
• Please choose the same country in register and login.
• If you forgot the password, click “Forget Password” to reset it.
3 4
30cm ~ 100cm
3. Plug In Your Camera
①Connect the micro USB connector of USB power cable to the power port of the
camera.
② Plug the USB-A connector of power cable into the power adapter.
③Plug the power adapter into a wall outlet and wait for the red indicator light
blinking, you will hear a tone.
Note: If the red indicator light does not blink, please reset it or power it on again.
4. Add Your Camera
① Follow the on-screen instructions to finish the setup to connect your Wi-Fi
network.
② Choose Room, click “Add Device →Video Surveillance →Smart Camera →next
step →Enter Wi-Fi Password → Confirm →Continue”.
5 6
③ A QR code will be shown, just face the phone to the camera, after you hear the
sound “connect the router”, then click “I heard a Prompt”, see below picture.
④Wait for the connection for about 30s, the device will be added successfully.
Name your camera and click the room where it is, click “Done”.
⑤ Click camera icon to preview camera live video.
Note: If you have downloaded “Akaso Smart” to link your cameras, please remove
cameras linked to Akaso Smart account and download “Smart Life” to link your
cameras again.(More details, please refer to the procedure “SET-UP”.)
1. Use Amazon Echo To Control
a. Configure the Amazon Echo device
(If you have already configured Amazon Echo, you can skip this step. The following
instructions are based on the iOS client.)
① Make sure your Amazon Echo device is powered on and connected to a Wi-Fi
network.
② Open the Alexa app on your phone. After successful login, tap on the menu in the
upper left corner of the Home page, select "Settings" and tap "Set Up A New
Device" to set up the Amazon Echo.
USE THIRD PARTY DEVICES TO CONTROL
IPC
Screenshot Speak
SD
2020-04-20 13:51:48
Record
Cloud storage DirectionPlayback
Signal: 91%
7 8
③ Choose your Amazon Echo device type and language for connecting. Press and
hold the small dot on the device until the light turns yellow. Then tap "Continue"
to connect to the hotspot.
④ After connecting to the Amazon Echo hotspot, return to the page. At this point,
the connection is successful. Tap "Continue" to proceed to the next step. Choose
a Wi-Fi network to connect to. Amazon Echo will take a few minutes to try to
connect to the network.
b. Key step - link Skill
①Tap on "Skills" in the Alexa app menu.
②Then search for "Smart Life". Tap "ENABLE TO USE" to enable the Skill.
③Enter the Smart Life APP account and password, then tap “Link Now” to link your
Smart Life account to enable the Skill. Continue and tap “DISCOVER DEVICES” to
add your camera into the list. Then you can start your smart home journey.
910
2. Use Google Assistant To Control
a. Configure Google Home device
(If you have already configured Google Home, you can skip this step. The following
instructions are based on the iOS client.)
① Make sure your Google Home device is powered on and connected to a Wi-Fi
network.
② Open the Google Home app on your phone. After successful login, tap on the
menu in the upper left corner and select "SET UP" to set up Google Home.
③It will notify you with a sound to ensure that you are connected to the correct
device. After you hear the sound, tap "YES" to proceed to the next step.
④ You can choose to differentiate the room where Google Home is located from
other Google devices. Then, select the Wi-Fi network and language, wait for the
system to complete the configuration, and tap "next."
⑤According to the page prompts, choose whether to agree to the corresponding
operation. When the page displays "Google Home is ready", select "continue" to
continue to the next step.
⑥ Next is the voice control guide tutorial. Once you're done listening, tap "FINISH
SET UP." At this point, Google Home setup is complete.
b. Key step - link Action
① On the main page of the Google Home app,
tap the sidebar menu in the top left corner
and select "Set up device".
②Then tap the bottom “Have something already set up?” and search for "Smart
Life".
③Find Smart Life on the list and open it, select the country where your Smart Life
app account is located, enter your Smart Life app account and password, and tap
“Link Now".
11 12
INSERT MICROSD CARD
Insert microSD Card
FORMAT MICROSD CARD
MicroSD Card and Cloud Storage can be selected, support 2-128GB card with
Class 10 or above. In order to make sure the card more compatible with the camera,
please format it firstly on computer as FAT32, then format it again in camera after
inserting the card. After finishing, the camera will start to record. Please format as
per the below:
① Open “Smart Life” to enter into the main interface, click camera icon to enter
intor the live view interface.
② Click on the right top to enter into the more setting, click “Storage Settings →
Format SD Card →CONFIRM” to format the card, please see below:
MOTION DETECTION
When the motion is detected, an alarm message with snapshot will be sent to
message center on the mobile phone, at the same time you will hear alarm sound.
① Motion Detection Alarm Setting: Click on the right top to enter into the more
setting, click “Motion Detection”, turn on it and select the level of sensitivity.
④Enter the Smart Life app account and password, then tap “Link Now” to link your
Smart Life account. Choose the room where your device is located, and then the
skill will appear on the Home Control Devices list. Now you can begin your smart
home journey.
IPC
Screenshot Speak
SD
2020-04-20 13:51:48
Record
Cloud storage Direction
Playback
Signal: 91%
Settings
Device Name IPC
Share Device
Device information
Use Echo
Basic Feature Settings
Decibel Detection Settings Off
Storage Settings
FAQ & Feedback
Motion Detection Off
Purchase VAS
Firmware Information
Remove Device
13 14
② View the messages with snapshots pushed: select “Me →Message Center”.
Note: In a small space, select "Low" or "Medium". For environments with large
space, in order to improve the alarm sensitivity, it is recommended to select "high".
If you need your phone to receive an alert message, you must allow “Smart Life”
app get all the permissions in your mobile phone app permissions interface.
PLAYBACK
① Enter into the live view interface, click Playback icon to enter into the playback
interface.
② Click ”Date” to select the date you want playback, then drag the time table to the
exact time that you want to playback.
The video will play automatically, press to pause/play.
SD
2020-04-20 13:51:48
22:00 23:00 0:00 1:00 2:00 2:00
Date Record
Screenshot
Replay
Sun Mon Tues Wed Thur Fri Sat
1 2 43
5 6 7 8911
18171615141312
19 21 22 23 24 25
30292827
26
10
2020 - 04
20
Note: The date in black color with video recordings, grey color without video
recordings. The time in grey color in the time table is with video recordings.
IPC
Screenshot Speak
SD
2020-04-20 13:51:48
Record
Cloud storage DirectionPlayback
Signal: 91%
2020-04-20 13:51:48
22:00 23:00 0:00 1:00 2:00 2:00
Date Record
Screenshot
Replay
Motion Detection
Motion Detection Alarm
IPC
Screenshot Speak
SD
2020-04-20 13:51:48
Record
Cloud storage DirectionPlayback
Signal: 91%
Settings
Device Name IPC
Share Device
Device information
Use Echo
Basic Feature Settings
Decibel Detection Settings Off
Storage Settings
FAQ & Feedback
Motion Detection Off
Purchase VAS
Firmware Information
Remove Device
15 16
Andere Handbücher für P40
1
Inhaltsverzeichnis
Sprachen:
Andere Akaso Sicherheitskamera Handbücher
Akaso
Akaso B70 Bedienungsanleitung
Akaso
Akaso P50 Bedienungsanleitung
Akaso
Akaso B70 Bedienungsanleitung
Akaso
Akaso P40 Bedienungsanleitung
Akaso
Akaso P30 Bedienungsanleitung
Akaso
Akaso CS300 Bedienungsanleitung
Akaso
Akaso CS300 Bedienungsanleitung
Akaso
Akaso B60 Bedienungsanleitung
Akaso
Akaso IP13M903 Gebrauchsanweisung
Akaso
Akaso B60 Bedienungsanleitung
