AKG MicroMic C 520 Bedienungsanleitung

BEDIENUNGSANLEITUNG ...........S. 2

Bitte vor Inbetriebn hme des Gerätes lesen!

USER INSTRUCTIONS ...............p. 12

Ple se re d the m nu l before using the equipment!

MODE D’EMPLOI ......................p. 22

Veuillez lire cette notice v nt d’utiliser le système!

ISTRUZIONI PER L’USO .............p. 32

Prim di utilizz re l’ pp recchio, leggere il m nu le!

MODO DE EMPLEO ...................p. 42

¡Sirv se leer el m nu l ntes de utiliz r el equipo!

INSTRUÇÕES DE USO ...............S. 52

F vor lei este m nu l ntes de us r o equip mento!

C520

C520 L

C 520_Manual_D030929:C 416 III-Hex/korr. 15.12.2009 10:31 Uhr Seite 1 (Schwarz/Black Auszu )

Page

1 Precaution/Description ...........................13

1.1Precaution..................................13

1.2PackingList ................................13

1.3 Optional Accessories . . . . . . . . . . . . . . . . . . . . . . . . . 13

1.4BriefDescription.............................13

1.5C520 .....................................14

1.6C520L....................................14

2 Interfacing ......................................15

2.1Introduction ................................15

2.2C520 .....................................15

2.3C520L....................................15

3 Using Your Microphone ...........................16

3.1 Mounting the Microphone Arm on the Left or Right . . 16

3.2 Putting the Microphone On. . . . . . . . . . . . . . . . . . . . . 17

3.3 Aligning the Microphone. . . . . . . . . . . . . . . . . . . . . . . 18

3.4 Adjusting the Microphone Arm . . . . . . . . . . . . . . . . . . 18

4 Cleaning........................................19

4.1MicrophoneSurface..........................19

4.2Windscreen.................................19

5 Troubleshooting .................................20

6 Specifications ...................................21

12 AKG C 520/C 520 L

T ble of Contents

C 520_Manual_D030929:C 416 III-Hex/korr. 15.12.2009 10:31 Uhr Seite 12 (Schwarz/Black Auszu )

1.1 Pr caution

1.2 Packing List

1.3 Optional

Acc ssori s

1.4 Bri f

D scription

Fig. 1: C 520/

C 520 L micro-

phone.

Refer to fig. 1.

Please make sure that the piece of equipment

your microphone will be connected to fulfills the

safety regulations in force in your country and is

fitted with a ground lead.

Check that the packaging contains all of the com-

ponents listed above. Should anything be miss-

ing, please contact your AKG dealer.

• Visit www.akg.com or refer to the latest

MicroMic brochure.

• C 520 L: B 29 L battery power supply

1Cardioid microphone for high gain before feed-

back. Frequency response tailored to vocal

use and flute miking.

2Shock mount reduces handling and cable

noise.

1 Prec ution/Description

AKG C 520/C 520 L 13

1 x C 520 or C 520 L 1 x W 44



 

1 carrying bag

(C 520 C 520 L)

C 520_Manual_D030929:C 416 III-Hex/korr. 15.12.2009 10:31 Uhr Seite 13 (Schwarz/Black Auszu )

Refer to fig. 1

on page 13.

1.5 C 520

1.6 C 520 L

3Adjustable, detachable 5-inch (125-mm)

gooseneck for precise microphone position-

ing.

4Removable microphone arm holder for placing

the microphone to the left or right of your

mouth.

5Microphone cable strain relief.

• For 9 to 52 V universal phantom power.

• 10-ft. (3-m) plug-in connecting cable with

phantom power adapter with integrated 3-pin

XLR connector and switchable bass rolloff (6)

(-4 dB at 100 Hz).

Fig. 1a: Phantom power adapter

with bass rolloff switch (6).

• For use with the B 29 L battery power supply,

MPA V L phantom power adapter, or PT 40 or

PT 400 transmitters.

• 5-ft. (1.5-m) plug-in connecting cable with 3-

pin mini XLR connectors.

1 Description

14 AKG C 520/C 520 L



C 520_Manual_D030929:C 416 III-Hex/korr. 15.12.2009 10:31 Uhr Seite 14 (Schwarz/Black Auszu )

2.1 Introduction

Important!

2.2 C 520

2.3 C 520 L

2.3.1 B 29 L or

MPA V L

Disconnecting

the cable:

Important!

The C 520 /C 520 L is a condenser microphone

and therefore needs a power supply.

Using any power supply other than those rec-

ommended by AKG may damage your micro-

phone and will void the warranty.

1. Connect the phantom power adapter on the

microphone cable to a balanced XLR micro-

phone input with phantom power.

2. Switch the phantom power on. (Refer to the

instruction manual of the unit to which you

connected your C 420.)

1. Plug the mini XLR connector on the micro-

phone cable all the way into one of the two mini

XLR sockets on the B 29, the mini XLR socket

on the connecting cable of the MPA II, or the

input socket on the bodypack transmitter.

The connector will lock automatically.

• To disconnect the cable, press the unlocking

button on the mini XLR connector and pull the

connector out of the socket.

•TToo aavvooiidd ddaammaaggiinngg tthhee ccaabbllee nneevveerr ppuullll aatt

tthhee ccaabbllee iittsseellff!!

2. B 29 L: Connect the B 29 L to the desired input.

MPA V L: Connect the MPA V L to a balanced

XLR microphone input with phantom power

and switch the phantom power on.

2 Interf cing

AKG C 520/C 520 L 15

C 520_Manual_D030929:C 416 III-Hex/korr. 15.12.2009 10:31 Uhr Seite 15 (Schwarz/Black Auszu )

3.1 Mounting

th Microphon

Arm on th L ft

or Right

Fig. 2: Removing

the microphone

arm.

Refer to fig. 2.

As delivered, the microphone arm is fitted on the

right side of the behind-the-neck headband. To

mount the microphone arm on the left side of the

headband:

1. Pull the microphone arm holder (2) with the mi-

crophone arm (3) from the temple piece (1) in

the direction of the arrow.

2. Remove the cover (4) from the other temple

piece.

3. Remove the cable from the cable holder (5).

4. Insert the microphone arm holder (2) and the

cover (4) all the way into the respective wire

loop below the opposite temple piece (1).

(The cover (4) stabilizes the temple piece and

prevents your hair from getting caught in the

wire loop.)

5. Press the cable back into the cable holder (5).

3 Using Your Microphone

16 AKG C 520/C 520 L

1, 2 3a

3b 4, 5













C 520_Manual_D030929:C 416 III-Hex/korr. 15.12.2009 10:31 Uhr Seite 16 (Schwarz/Black Auszu )

3.1 Putting th

Microphon on

Figs. 3 to 5: Putting

on and tightening

the headband.

Fig. 6: Bending the

headband and

temple pieces

to fit.

Refer to fig. 6.

1. Put the behind-the-

neck headband on

as shown in figs. 3

through 5.

2. Should the microphone fit loosely, you may

bend the behind-the-neck headband and the

temple pieces inward:

• Hold the headband or temple piece firmly at

the points marked in fig. 6 and bend inward

with extreme care.

• Check whether the microphone fits better. If it

does not, bend the wire some more, again with

extreme care.

3 Using Your Microphone

AKG C 520/C 520 L 17

C 520_Manual_D030929:C 416 III-Hex/korr. 15.12.2009 10:31 Uhr Seite 17 (Schwarz/Black Auszu )

Not :

3.3 Aligning th

Microphon

Fig. 7: Adjusting

the gooseneck.

Refer to fig. 7.

3.4 Adjusting th

Microphon Arm

Fig. 8: Adjusting

the microphone

arm.

Refer to fig. 8.

• Both the headband and temple pieces are

made of spring steel wire. If you bend the wire

too hard it may be extremely difficult to bend

the wire back to the desired shape.

• Adjust the gooseneck so as to point the micro-

phone at the corner of your mouth.

1. Unsnap the goose-

neck (1) from the

holder (2).

2. Snap the gooseneck

(1) back into the

holder (2) at the

desired position.

3 Using Your Microphone

18 AKG C 520/C 520 L

C 520_Manual_D030929:C 416 III-Hex/korr. 15.12.2009 10:31 Uhr Seite 18 (Schwarz/Black Auszu )

Important!

4.1 Microphon

Surfac

4.2 Windscr n

• Never try to shift the gooseneck inside the

holder. This would damage the gooseneck

and/or holder.

• To clean the microphone surface, use a soft

cloth moistened with water.

• Clean the foam windscreen in mild soap suds.

You can use the windscreen again as soon as it

has dried.

3 Using Your Microphone

AKG C 520/C 520 L 19

4 Cle ning

C 520_Manual_D030929:C 416 III-Hex/korr. 15.12.2009 10:31 Uhr Seite 19 (Schwarz/Black Auszu )

5 Troubleshooting

20 AKG C 520/C 520 L

Problem Possible Cause Remedy

No sound: 1. Power to mixer

and/or amplifier is off.

2. Channel or master

fader on mixer, or vol-

ume control on am-

plifier is at zero.

3. Microphone is not

connected to mix er

or amplifier.

4. Cable connectors are

seated loosely.

5. Cable is defective.

6. No supply voltage.

1. Switch power to

mixer or amplifier on.

2. Set channel or mas-

ter fader on mixer or

volume control on

amplifier to desired -

lev el.

3. Connect microphone

to mixer or amplifier.

4. Check cable connec-

tors for secure seat.

Check cable and re-

place if damaged.

6. Switch phantom

power on.

Phantom power sup-

ply: connect to power

outlet or insert bat-

tery

(batteries).

Check cable and re-

place if necessary.

Distortion: 1. Gain control on the

mixer set too high.

2. Mixer input sensitivity

too high.

1. Turn gain control

down CCW.

2. Connect a 10-dB

preattenuation pad

between microphone

cable and input.

C 520 L: Also read the transmitter and receiver manuals!

C 520_Manual_D030929:C 416 III-Hex/korr. 15.12.2009 10:31 Uhr Seite 20 (Schwarz/Black Auszu )

Andere Handbücher für MicroMic C 520

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere AKG Mikrofon Handbücher

Beliebte Mikrofon Handbücher anderer Marken

IK Multimedia

IK Multimedia iRig Stream MIC PRO Bedienungsanleitung

DAPAudio

DAPAudio RM-101 Bedienungsanleitung

Sennheiser

Sennheiser evolution wireless series EM 100 Bedienungsanleitung

Sony

Sony C-48 Bedienungsanleitung

GIGAMEDIA

GIGAMEDIA GGM PAMICUHFG Bedienungsanleitung

Shure

Shure WH30TQG Bedienungsanleitung

auna PRO

auna PRO MIC-900 Bedienungsanleitung

Shure

Shure KSM141 Bedienungsanleitung

MAIIN SOUND

MAIIN SOUND IIN style Bedienungsanleitung

Earthworks

Earthworks TC25 Bedienungsanleitung

Sennheiser

Sennheiser evolution D1 Bedienungsanleitung

Alesis

Alesis MicLink Wireless Bedienungsanleitung

DSPPA

DSPPA D6234 Bedienungsanleitung

Monacor

Monacor IMG STAGELINE ECM-300B Bedienungsanleitung

Ansr Audio

Ansr Audio Scan16 Bedienungsanleitung

Shure

Shure MXA710 Series Bedienungsanleitung

JLab

JLab GO TALK Bedienungsanleitung

Renkforce

Renkforce TY-109 Bedienungsanleitung