AL Tech SL-2401 Bedienungsanleitung

SL-2401B / S

CONTENTS

Technical specification & feature-----------------------------------------------3

Part list ----------------------------------------------------------------------------------3

Motor structure diagram-----------------------------------------------------------4

Typical installation layout---------------------------------------------------------5

Factory setting motor open direction-----------------------------------------6

General safety ------------------------------------------------------------------6

Installation of the opener-----------------------------------------------------8

Necessary tools----------------------------------------------------------------8

Caution --------------------------------------------------------------------------8

Example sliding gate setup -------------------------------------------------9

Installation procedures ------------------------------------------------------9

Manual operation -------------------------------------------------------------------10

Installation of the gear rack -----------------------------------------------------10

Installation of limit magnet ------------------------------------------------------10

Control board program -----------------------------------------------------------11

Parameter-----------------------------------------------------------------------11

Terminal and diagram of control board instruction--------------------11

Push button connection------------------------------------------------------12

Photocell connection----------------------------------------------------------12

Flashing light connection-----------------------------------------------------13

Motor connection---------------------------------------------------------------14

Transformer connection -----------------------------------------------------14

Battery and solar connection-----------------------------------------------15

Function details ---------------------------------------------------------------------15

Digital display setting --------------------------------------------------------------17

Board digital LED display---------------------------------------------------------18

1* sliding gate motor

2*r

ote co

2* magnet 2*manual release key

ansion bolt 2

lead acid batter

12V 5AH

1*transformer

Technical

Specifications

Features

Specifications:



Power

supply:

Model

220V±10%,

50/60Hz

Model S: Solar Power Panel 24v 30w



Motor:

24VDC



Absorbed

motor

power:

200W



Gate

moving

speed:

15m/min



Max

gate

weight:

1000KGS



Environmental

conditions:

From

-25°C

+50°C



Protection

class:

IP44



Dimensions:42cmX42cmX27cm

(L*W*H)



Remote

control

distance:

≤30m



Output

gear

module:M=4



Output

gear

number

:Z=16

Features:



Easy

install

and

low

maintenance.



Quick

selection

for

gate

open/close

direction.



Emergency

release

key

case

power

failure



Stop/Reverse

case

obstruction

during

gate

opening/closing



Built

adjustable

auto-close



Can

equipped

with

wide

range

accessories



Soft

start

soft

stop



Pedestrian

mode



all-

in-

one

machine(control

panel

,transformer

and

battery

built

inside

motor)

makes

convenient

installation

elegant.

Part

list:

Model

with

lead

acid

battery:

2*remote control

2*manual release key

1*lithium battery

Model S

with

solar power charge controller:

sliding

gate

motor

magnet

4*expansion

bolt

Motor

structure

diagram

Model B

with

lead

acid

battery:

Typical installation layou

Fig 5

Noted:Before Installing, test the motor by plugging it into a power and pressing the remote. You will see

the motor cog turn. When it stops (after approx 1 minute), press the remote again to see it turn in the

opposite direction. This will give you an understanding of the way in which the motor will move the gate

Model S with solar power charge controller:

Factory setting motor open direction:

The gate motor will open the gate to the right-hand side as its default setting ,as below picture(Fig 6):

Fig 6

Gate in closed position Gate in open position

If gate need to open to the left-hand , then motor need to be installed on the left side of gate, as below picture(Fig 7)

showed,now you will need do below procedures:

1.Exchange motor open and close cable on the control board motor connection terminal

2.Swap over two magnets positions

Fig 7

Gate in closed position Gate in open position

General Safety

WARNING! An incorrect installation or improper use of the product can cause damage to persons,

animals or properties.

• Scrap packing materials (plastic, cardboard, polystyrene etc.) according to the provisions set out by current

standards. Keep nylon or polystyrene bags out of children’s reach.

Noted:Installation and safety precautions. These should be read carefully before installation and

operation as they provide important information about safety,installation, operation and

maintenance. This product complies with the recognized technical standards and safety regulations

• This product was exclusively designed and manufactured for the use specified in the present

documentation. Any other use not specified in this documentation could damage the product and be dangerous.

• The factory declines all responsibility for any consequences resulting from improper use of the product, or use which

is different from that expected and specified in the present documentation.

• Do not install the product in explosive

atmosphere.

• The factory declines all responsibility for

any consequences resulting from failure to

observe Good Technical Practice when

constructing closing structures (door, gates

etc.), as well as from any deformation which

might occur during use.

• Disconnect the electrical power supply

before carrying out any work on the installation. Also disconnect any buffer batteries, if fitted.

• Check that a differential switch with a 0.03A threshold is fitted just before the power supply mains.

• Check that earthing is carried out correctly: connect all metal parts for closure (doors, gates etc.) and all system

components provided with an earth terminal.

• Fit all the safety devices (photocells, electric edges etc.) which are needed to protect the area from any danger

caused by squashing, conveying and shearing.

• The factory declines all responsibility with respect to the automation safety and correct operation when other

supplier’s components are used.

• Only use original parts for any maintenance or repair operation.

• Do not modify the automation components, unless explicitly authorized by the factory.

• Position at least one luminous signal indication device (blinker) where it can be easily seen, and fix a Warning

sign to the structure(Fig 8).

Fig 8

• Only use original parts for any maintenance or repair operation.

• Do not modify the automation components, unless explicitly authorized by the factory.

• Instruct the product user about the control systems provided and the manual opening operation in case of

emergency.

• Do not allow persons or children to remain in the automation operation area.

• Keep radio control or other control devices out of children’s reach, in order to avoid unintentional

automation activation.

• The user must avoid any attempt to carry out work or repair on the automation system, and always request the

assistance of qualified personnel.

• Anything which is not expressly provided for in the present instructions is not allowed.

• Installation must be carried out using the safety devices and controls prescribed by the EN 12978 standard.

Fig 9

Installation of the Opener

Necessary Tools

The following tools may be necessary to install the Gate Opener.

Screwdrivers

Electric drill

Wire cutters

Wire stripper

A socket set

Caution

Be sure that the opener is installed in a level and paralleled position and is properly secured and the gate can

be moved smoothly push or pull by hand before installing motor(Fig 10)

Improper installation could result in property damage, severe injury, and/or death.

Before starting installation, ensure that there is no point of friction during the entire movement of the gate and

there is no danger of derailment.

Wheels and guide rollers should rotate easily and be free from dirt/grime.

Ensure that the Warning Signs are present.

Fig 10

Example Sliding Gate Setup(Fig 11)

Fig 11

Note:Before motor installation , sliding gate must installed well with hardware kit .If any gate hardware kit require,

please contact with us.

Installation procedures (Fig 12)

1.The limit default setting is for gate in close position. Before installation, please make sure gate is closed.

2. Prepare one or more conduits for the electrical cables. Cable conduits have to pass through the hole in the base

plate.

3. Pour concrete and before it starts to harden, check that it is parallel to the gate leaf and perfectly level.

4. The four anchor bolts must be set into the concrete when it is poured, make sure the position of anchor bolts was

placed according to the position of mounting holes on the base plate before concrete become harden.

5. Mount the base plate to the concrete pad.

6. Place the opener onto base plate. Check that it is perfectly parallel to the gate, and then screw the four bolts and

washers supplied. It's only temporary installation. Further adjustment will be required when install the rack.

Fig 12

Manual Operation

The opener comes with an easy operating manual release. It brings the easiest manual release operation just in case

of any emergency.

Insert the manual release key supplied in package to release lock, then turning the key clockwise 90 degrees.

Pull out the release lock part to be more than 90 degrees, now the gear and shaft are disengaged

Refer to the figures below(Fig 13)

Fig 13

Installation of the Gear Rack

1.Start with gate in closed position

2.Gear rack length depend on gate length ,each gear rack is 1 metre. Put one end of rack on the output gear of motor

as a temporary support.Make the rack horizontal and mark the rack mounting holes (three holes) on the gate .(Fig 14)

3. Weld the rack nut on the gate as mark and connect the rack to the gate using the bolt provided. Before weld, please

keep 1.0mm space between the rack and the gear to avoid the weight of the gate effect on the opener.

Fig 14

Installation of limit magnet

1.To ensure motor auto stop correctly , it is recommended to install limit magnet at both ends of rails to prevent gate

run out of rails. The rails must be installed horizontally.

2.Two limit magnets supplied , blue one for open limit , red one for close limit .

3.Release the clutch with manual key and push the sliding gate manually to predetermine position, fix the magnet to

gear rack and then tighten the clutch with key. Power on control board ,running the motor with remote control,adjust

magnet to proper position until the gate can auto stop at its correct position when full open or full close .

Fig 15

Important:

1. Check that the gear rack teeth engages with the gear teeth throughout the full distance. If not, adjust the

Inhaltsverzeichnis

Andere AL Tech Toröffner Handbücher

AL Tech

AL Tech SW-01 Bedienungsanleitung

Beliebte Toröffner Handbücher anderer Marken

Elite

Elite CSW200UL Bedienungsanleitung

CAME

CAME FROG-PM4 Bedienungsanleitung

SOMFY

SOMFY FX230 Bedienungsanleitung

Aprimatic

Aprimatic ONDA 500 Bedienungsanleitung

Turnstiles

Turnstiles FSW 900 Bedienungsanleitung

Erreka

Erreka BUL BL33 Betriebsanleitung

Erreka

Erreka VULCAN S Bedienungsanleitung

Beninca

Beninca R1-2 WBV Bedienungsanleitung

Erreka

Erreka VULCAN D Bedienungsanleitung

Motorline professional

Motorline professional FORT Bedienungsanleitung

Beninca

Beninca BOB5024 Bedienungsanleitung

AGA

AGA GATEMASTER 900 HD Bedienungsanleitung

Chamberlain

Chamberlain MotorLift HC280ML Bedienungsanleitung

SOMFY

SOMFY Dexxo RTS Pro Bedienungsanleitung

Cardin

Cardin BL Series Bedienungsanleitung

Westfalia

Westfalia 85 27 06 Bedienungsanleitung

CAME

CAME F500 Bedienungsanleitung

Extel

Extel VERA Bedienungsanleitung