AL Tech DSD 4121 Benutzerhandbuch

Important Safety Information ........................................................................................................................ 2

Front and Back Panels ................................................................................................................................. 3

Install & Connect the DSD 4121 Decoder .................................................................................................... 4

The Remote Control ..................................................................................................................................... 7

DSD 4121 Decoder : Features and menu..................................................................................................... 8

Legal Matters .............................................................................................................................................. 20

Product Warranty ........................................................................................................................................ 21

Help and Information .................................................................................................................................. 22

Page 1 of 22 Table of Contents

BASIC VIEWER’S GUIDE

TABLE OF CONTENTS

The DSD 4121 Basic Viewer’s Guide is the subject of intellectual

property rights, including copyright, under domestic law and

international conventions. All rights are reserved.

The 4121 Basic Viewer’s Guide supplements the information supplied

with the packaging of the decoder as well as the detailed information

available on our website.

Due to software upgrades, the features and functionalities in this

Basic Viewer’s Guide may differ from those on your decoder. Please

visit for the latest Viewer’s Guide.

Version 2.0 (August 2010) e&oe

www.uec.com.au

This DSD 4121 Decoder meets International Safety Standards. Please read the following recommended safety

precautions carefully.

This decoder operates within the range 100-250 V AC 47-63 Hz mains supply only. Connect the power cable to the

decoder before connecting the other end to the power outlet. Disconnect the decoder from the power outlet before

connecting or disconnecting the decoder from any other equipment.

Keep liquids away from the decoder and do not put anything on top of the decoder which may spill (example : lit

candles or containers of liquid). Do not use the decoder in extreme temperature and humid conditions.

Before cleaning the decoder, first disconnect the decoder from the mains. Use a dry cloth to clean the exterior.

Do not block the ventilation holes and ensure that free airflow is maintained around the decoder.

Never stand the decoder on soft furnishings or on carpet.

Do not use or store the decoder near a heater or where it is exposed to direct sunlight.

Never stack other electronic equipment on top of, or below the decoder.

Do not attempt to repair the decoder yourself. You should also never remove the cover of the decoder. Any

tampering with the decoder will invalidate the warranty. Refer all servicing to Altech UEC Australia,

Tel. +61 2 94255777.

If the decoder is installed in an area subject to intense lightning activity, protection devices for the decoder mains

connector are recommended.

The earth/grounding system must comply with local regulations.

MAINS SUPPLY

LIQUIDS AND SPILLAGE

CLEANING

VENTILATION

SERVICING

LIGHTNING

EARTHING

IMPORTANT SAFETY INFORMATION

Page 2 of 22

Important Safety Information

Smartcard Slot Behind the Front Panel Cover.

RESET Reboots the decoder, i.e. if decoder freezes etc.

Page 3 of 22 Front and Back Panels

Front Panel

LED Display

Displays the time (Standby Mode) or displays the selected

TV channel.

LEDs

Bi-colour

RED/GREEN

AMBER

GREEN

Indicates response to remote control commands and/or error mode

RED = Decoder in standby mode or an error condition has occurred.

GREEN = Normal operations.

Flashes = when there are incoming messages

Flashes = when RCU command received.

SAT IN

Connect to the LNB on dish

Power Input connector

Connect to your home AC mains outlet

Data Services

Connects to Rs323 (for software upgrade)

HDMI

Connects to the high definition (HDMI) input on TV or AV home theatre system

Composite Video

Connects to the video inputs on TV

Video =YPbPr

Connects to the YPbPr inputs on TV

Audio = Left & Right

Connects to the analog inputs on TV

USB

Connects to USB device (for software upgrade)

R J45

Connects to Ethernet (currently disabled in this version)

S/PDIF (Coaxial connector)

Connects to the Digital Audio coaxial input on TV or AV Home Theater System

TOSLINK (Optical connector)

Connects to the Digital Audio optical input on TV or AV Home Theater System

BACK PANEL

FRONT PANEL

STANDBY Button

1Switches the decoder between ON and STANDBY modes.

MENU Opens command menu for changing the setup.

OK Accepts the selection.

Increases the volume level.

4VOL

Changes to the previous available channel.

2CH

Decreases the volume level.

5VOL

Changes to the next available channel.

3CH

3 7

1 2 569 10 11

Page 4 of 22

QUICK START GUIDE FOR EXISTING AURORA INSTALLATIONS

Remove decoder from packaging.

Insert supplied batteries into the remote control.

Connect to existing TV and dish installation - verify the LNB setup in the menus and adjust and re-scan if

necessary.

Decoder should lock to service and present video.

QUICK START GUIDE FOR NEW INSTALLATIONS

Ensure that all connections are secure before connecting the power cable (#11)to the power input connector.

Option A: AV Connectors (Standard Definition TV)

Connect the satellite feed to the SAT IN input (#1) on the decoder.

Connect the Audio / Video cables to the audio (#6) and video (#8) outputs on the decoder and then to

the audio and video inputs on the TV or home theater system.

Option B: HDMI Connector (High Definition TV)

Connect the satellite feed to the SAT IN input (#1) on the decoder.

Connect a High Definition cable to the HDMI connector (#9), and then connect the other end of the

cable to the HDMI connector on the TV.

Option C: HDMI Connector (AV Home Theater system and a High Definition TV)

Connect the satellite feed to the SAT IN input (#1) on the decoder.

Connect a High Definition cable to the HDMI connector (#9), and then connect the other end of the

cable to the HDMI input connector of the AV home theater system. Then connect the output HDMI of

the AV home theater system to the TV.

INSTALL & CONNECT THE DSD4121 DECODER

Install & Connect the DSD 4121 Decoder

169 11

CONNECTING THE DSD4121 DECODER

Page 5 of 22

CHANGING THE LNB SETTING

Press the MENU button to launch the menu, then.

Navigate to the following menu screens:

Advanced Options

Installation setup

Enter the setup pin (The default is 1234)

LNB setup

Select the LNB type by pressing OK to select first item and using left and right to scroll. Press OK again

to deselect the option.

Enter in the correct LNB value by pressing OK on the LNB Frequency option and then enter the new

LNB value, then press OK again to deselect the option.

Press OK on the “Accept these settings” button.

You will be returned to the Satellite installation menu.

Press OK on “Satellite Rescan” to rescan the decoder with the new LNB settings.

Install & Connect the DSD 4121 Decoder

Page 6 of 22

RESTORING FACTORY DEFAULTS

Resetting to factory defaults can be useful if you have changed some settings and lost some functions.

Resetting will restore the decoder back to its original configuration and you will lose all personalized settings.

The only setting that is not reset is the LNB setting. Please manually edit this setting to the correct value.

ETHERNET

Ethernet functionality is planned for future support. New user manuals will be available on the website when

this feature is available.

SMART CARD

The smart card is paired to this decoder which means that the smart card provided with your decoder

cannot be used in any other decoder. Similarly you will not be able to use any other card in your decoder.

RESET BUTTON

There is a reset button on the front panel. This can be used to reset your decoder in the case of a video

freeze for example. The decoder will reboot after a few seconds and display “boot” on the front panel while

it starts up.

MHEG

The ability to launch MHEG applications will be supported by the DSD4121 in the future. User instructions

will be available on the website (www.uec.com.au) once this feature becomes available.

Install & Connect the DSD 4121 Decoder

Page 7 of 22

TV and Radio TV: selects TV bouquets and 2nd

function = Radio: selects bouquets

Standby

Alt/Back and

Closed Captions

TV Guide and

Aspect Ratio

(ARC)

Shift

Language and

Parental Control

Information

Mute

Exit

Navigation (4)

and OK/Enter

Program up/down

Places set top box into standby

mode

ALT: switches between current and

previous channels and 2nd function

= Closed Caption: alternates

between Closed Caption ON/OFF

TV Guide: Opens Freeview program

guide application and 2 function

Aspect Ratio switches between

aspect ratio settings

Select 2 function to buttons

Language: selects language where

supported and 2 function = PG :

selects Parental Control where

supported

Selects programme information

synopsis

Mutes the audio

Leaving a menu or function

Menu navigation and selection

Allows channel up and down

navigation

Digits 0-9 Numerical data entry of channel

number, PIN

5 Coloured

buttons

Functions as required by application

or context

Help Selects Help function where

supported

Menu Selects Menu system

Volume up/down Adjust volume up and down

ALT

TV Guide

ARC

Language

MUTE

EXIT

+P-

+V-

HELP

Button Name Button

Identification Function

THE REMOTE CONTROL

The Remote Control

Page 8 of 22

I-PLATE

The information plate (i-Plate) displays information about the current and next event at the bottom of the TV screen.

You can open the i-Plate by pressing the ”i” button on the remote. To change to a different channel carry-out the

following:

Press the “+P-” button on the remote to change the channel to the next/previous channel respectively, or

When the i-Plate is open, press the “LEFT/RIGHT” arrow buttons on the remote. This allows you to browse

the programme information of the other channels without changing the channel you are presently viewing.

You can set the timeout value for the information plate (i-Plate) from the menu.

NOTE: The i-Plate will only timeout when changing channels from the “+P-” button. If you have manually opened

the i-Plate, the “EXIT” button must be pressed to remove it.

DSD4121 DECODER FEATURES AND MENU

Decoder Features and Menu

Page 9 of 22

I-PLATE EXTENDED MODE

The extended i-Plate displays a short description about the currently selected i-Plate programme, see screen below.

To remove the extended i-Plate, you must press the “i” button again or the “EXIT” button to remove both the

extended and i-Plates, see diagram below.

i-Plate Toggling Diagram

Decoder Features and Menu

Andere Handbücher für DSD 4121

Inhaltsverzeichnis

Andere AL Tech Empfänger Handbücher

AL Tech

AL Tech DSD 4121 Bedienungsanleitung

Beliebte Empfänger Handbücher anderer Marken

Garmin

Garmin GA 23 Bedienungsanleitung

Aiphone

Aiphone PS-12F Bedienungsanleitung

IMES

IMES TCS-01CA-PMI Bedienungsanleitung

BWI Eagle

BWI Eagle AIR-EAGLE SR Handbuch

AMIMON

AMIMON AMN12310 WHDI Bedienungsanleitung

Dual

Dual DMCPA79BT Betriebsanleitung

Sound Associates

Sound Associates SA652P Bedienungsanleitung

Sherwood

Sherwood NewCastle R-772 Bedienungsanleitung

Audio

Audio A10-RX Series Bedienungsanleitung

AllSee

AllSee PushShare PSRV1.1 Bedienungsanleitung

DEMAG

DEMAG DRC-DR D2 Bedienungsanleitung

Teleco

Teleco TVRCL868A02 Bedienungsanleitung

Bosch

Bosch RF3222E Bedienungsanleitung

Kramer

Kramer 631R Bedienungsanleitung

Xpress

Xpress xmc10 Bedienungsanleitung

JVC

JVC KD-MR1BTS Bedienungsanleitung

Omega Engineering

Omega Engineering UWTC-REC3 Bedienungsanleitung

e-survey

e-survey E300 Pro Bedienungsanleitung