Alarm Lock CYLINDER ADAPTER KIT Addendum Leitfaden

CYLINDER ADAPTER KIT

ADDENDUM

WI 1177 1/03

CAUTION

PROPER ALIGNMENT OF GEARS IS CRITICAL!

FAILURE TO ALIGN GEARS PROPERLY WILL CAUSE LOCK TO MALFUNCTION.

345 Bayview Avenue

Amityville, New York 11701

For Sales and Repairs 1-800-ALA-LOCK

For Technical Service 1-800-645-9440

© ALARM LOCK 2003

Note: See the illustrated instructions, WI 1163,

"How to Replace Cylinder" for detailed replace-

ment procedures. After inserting the new cylin-

der and Slide Plate, and before replacing the

Cover Plate (step 16), align the gears as follows:

The rollpin hole located on the Spindle Bush-

ing (HW970) must be aligned with the

stamped arrow on the Gear Driver (HW968).

Using a straight edge (or for convenience you

can use the Cover Plate HW1016 instead of a

straight edge) align the gears as shown in the il-

lustration at right:

Place one end of the straight edge directly over

the center retaining screw of the Gear Driver.

Align the other end of the straight edge with the

rollpin hole. The stamped arrow (!) on the Gear

Driver must be directly underneath the straight

edge when aligned with the rollpin hole.

If the arrow is not aligned, loosen the Gear

Driver retaining screw, lift the Gear Driver. The

Slide Plate springs will cause the Spindle Bush-

ing to self-align (if the Slide Plate is installed

properly). Re-position the Gear Driver until the

arrow is aligned with the rollpin hole. Tighten the

Gear Driver Retaining screw, and Replace the

Cover Plate and Frame Spacer as per the direc-

tions in WI 1163.

Rollpin hole

on Spindle

Bushing

(HW970)

Idle Gear

(HW967)

Stamped

Arrow on

Gear Driver

(HW968)

Gear Driver

retaining

screw

Inhaltsverzeichnis

Andere Alarm Lock Sperren Handbücher

Alarm Lock

Alarm Lock TRILOGY DL2700 Bedienungsanleitung

Alarm Lock

Alarm Lock Trilogy DL4100 Series Addendum Montage- und Bedienungsanleitung

Alarm Lock

Alarm Lock NEW KEY LOGGING FEATURE Addendum Bedienungsanleitung

Alarm Lock

Alarm Lock Trilogy DL1200 Bedienungsanleitung

Alarm Lock

Alarm Lock DL 3000WP Bedienungsanleitung

Alarm Lock

Alarm Lock TRILOGY DL2700 Bedienungsanleitung

Alarm Lock

Alarm Lock NARROW STILE ACCESS LOCKS Leitfaden

Alarm Lock

Alarm Lock Trilogy Networx Double-Sided PDL6300 Bedienungsanleitung

Alarm Lock

Alarm Lock TRILOGY DL2700 Bedienungsanleitung

Alarm Lock

Alarm Lock PDL3300 Bedienungsanleitung

Alarm Lock

Alarm Lock LEKTROLOK 104 Bedienungsanleitung

Alarm Lock

Alarm Lock 700 SERIES Handbuch

Alarm Lock

Alarm Lock Trilogy PDK3000 Series Installationshandbuch

Alarm Lock

Alarm Lock Trilogy PDL3500 Bedienungsanleitung

Alarm Lock

Alarm Lock Trilogy DL1200 Leitfaden

Alarm Lock

Alarm Lock Trilogy PDL3500 Bedienungsanleitung

Alarm Lock

Alarm Lock LEKTROLOK 103 Bedienungsanleitung

Alarm Lock

Alarm Lock DL2500-SERIES Installationshandbuch

Alarm Lock

Alarm Lock Trilogy PL3000 Installationshandbuch

Alarm Lock

Alarm Lock Trilogy DL1200 Installationshandbuch

Alarm Lock

Alarm Lock DL1300NW Leitfaden

Alarm Lock

Alarm Lock EAGLE 4700DL Betriebsanleitung

Alarm Lock

Alarm Lock Networx DL1325NW Leitfaden

Alarm Lock

Alarm Lock ArchiTech Series Bedienungsanleitung

Beliebte Sperren Handbücher anderer Marken

Magic

Magic 105 Bedienungsanleitung

Gantner

Gantner GAT NET.Lock 7020 System Kurzanleitung

Wittkopp

Wittkopp Insys 7202 Bedienungsanleitung

Dorma

Dorma Studio Classic Bedienungsanleitung

Securam

Securam ECSL-601 Bedienungsanleitung

Sudhaus

Sudhaus 3003 Bedienungsanleitung

Safety 1st

Safety 1st 48517 Bedienungsanleitung

Pado

Pado FDS-10 Bedienungsanleitung

Esco

Esco systeQ Series Bedienungsanleitung

COMPX

COMPX National D8951 Bedienungsanleitung

secureo

secureo Key Box Bedienungsanleitung

Stock Loks

Stock Loks C8713 Bedienungsanleitung

COMPX

COMPX 1T-058 Betriebsanleitung

Auslock

Auslock T11 Bedienungsanleitung

ELCOM

ELCOM 7205 Bedienungsanleitung

Stealth SAFES

Stealth SAFES ShadowVault Bedienungsanleitung

Knox

Knox KeySecure 5 Bedienungsanleitung

Kwikset

Kwikset 48334/01 Bedienungsanleitung