Alecto DBX-76 Bedienungsanleitung

DBX-76

USER MANUAL

1 ECO MODE

Given the unique ECO MODE function on the DBX-76 baby monitor,

the transmitter can be automatically and COMPLETALY deactivated

when your baby is sleeping peacefully. The baby monitor will only be

turned on when necessary, for example if your baby is crying.

Take note that if the baby makes a sound, the baby unit will need to

make a connection with the parent unit again. As a result, the rst few

seconds of sound or short sounds may not be heard. If you wish to

hear every sound coming from the baby’s room, then set the sensiti-

vity of the baby unit to maximum (level = 5). At this level the baby unit

will stay on continuously. You can also disable the ECO MODE ON-

OFF switch located at the bottom of the baby unit.

More information about the ECO MODE can be found in Section 5.1.

2 GENERAL FUNCTIONS

2.1 OVERVIEW PARENT UNIT

1. Light :

Flashes when the parent unit is switched off and being charged

on the charger (will stop ashing when the batteries are full).

Lights up continuously when the parent unit is switched on.

Flashes when the parent unit is off the charger and the batteries

are running low.

2. Light :

lights up when the baby unit detects a sound and the volume on

the parent unit is set to 0 (off).

3. Key:

talk back button to the baby unit.

4. Key:

Press repeatedly to decrease the receiver volume or to scroll

through the settings.

5. Key: To open the menu.

6. Built in loud speaker.

7. OK Button: to conrm the settings.

8. Built in microphone.

9. Key:

Press the key repeatedly to increase the receiver volume or to

scroll through the settings.

10. Key:

Press for more than 2 seconds to turn the parent unit on.

Press again for more than 2 seconds to turn the parent unit off.

11. Display (see next page).

12. Light : connection indicator:

Flashes 1x per second while the parent unit is searching for the

baby unit.

Lights up continuously when the parent unit is connected to the

baby unit.

Flashes 1x per 5 seconds if the ECO MODE is switched on (see

section 5.1).

2.2 OVERVIEW BABY UNIT:

1. Key:

Press once quickly to switch the baby unit on and for more than

1 second to turn off the baby unit.

2. Built-in microphone.

3. Night light, the on /off indicator:

Lights up when the baby unit is switched on, and goes off when

the baby unit is switched off.

4. Key: press for more than one second in order to call the pa-

rent unit.

5. Battery compartment.

6. Temperature sensor.

2.3 OVERVIEW DISPLAY:

lights up when the lullabies are playing.

shows the temperature from the baby unit.

indicates the level of battery time available.

lights up during the setup of the sensitivity.

Displays the various func-

tions and alerts during

usage.

Displays the various

settings during program-

ming.

3 INSTALLATIONS

3.1 PARENT UNIT:

The parent unit is powered by the two supplied rechargeable batteries.

These batteries can be charged using the included holder/charger.

ATTENTION:

NEVER place normal batteries in the parent unit. Normal

batteries are not rechargeable and may explode if charging

causing irreparable damage to the parent unit.

1. Slide the battery cover located at the back of the

parent unit downwards to take off.

2. Place the two supplied rechargeable batteries in the

battery compartment taking note of the polarity (+

and -).

3. Slide the battery cover back on again.

4. Place the power adapter connected to the cradle/

charger into a 230Volt electrical wall outlet and place

the parent unit onto the cradle/charger.

5. Leave the parent unit on the cradle/charger

for 15 hours in order to properly charge the

battery.

ATTENTION:

Put the batteries into the parent unit rst

before placing it on the charger to charge the

batteries. Never place the parent unit on the charger without the

batteries.

3.2 BABY UNIT:

The baby unit is powered from the supplied power adapter. The baby

unit can also be used cord free, for example if on holiday you can use

four regular batteries. The power adapter for the baby unit is included.

Batteries for the baby unit are not included.

1. Open the battery compartment on the back of the baby unit by

unscrewing the screw using a small screwdriver and turning

counter clockwise to loosen.

2. Place 4 batteries as indicated in the battery compartment taking

note of the polarity (+ and -).

3. Place the battery cover back onto the baby unit and turn the

screw back on by turning it clockwise.

4. Connect the low voltage plug from the

adapter into the 7VDC 0.42 A

connection on baby unit, then insert the other

end of the adapter into a 230Vol electrical

wall outlet.

Only use NORMAL (NON rechargeable) batteries for the baby unit,

and preferably type ALKALINE.

3.3 PLACEMENT TIPS:

• DO NOT place the baby unit into the bed with the baby, and

keep a minimum distance of 2 meters between the baby and the

baby unit.

• MAKE SURE THE BABY CAN NOT TOUCH THE ADAPTER

CORD.

• Do not place the baby monitor onto a cellulose surface as the

rubber feet may leave marks.

• Do not place the baby unit or the parent unit in direct sunlight or

in a damp place. The baby monitor is not waterproof. Too much

moisture may cause damage to the electronics.

3.4 BELT CLIP:

The belt clip allows you to carry the parent unit more easily so that it is

not an added hindrance when you move around.

You can take the belt clip off by sliding it downwards and place it back

on again by sliding it upwards.

4 HOW TO USE

Please note that this baby monitor should only be used as an added

assistance. The unit does not replace the physical presence and over-

sight of a parent or guardian.

4.1 ON / OFF AND CONNECTION CONTROL:

Switch the parent unit on:

Press the on/off button for more than 2 se-

conds in order to switch the parent unit on.

The connection indicator ( ) will ash and

the parent unit will establish a connection

with the baby unit.

Switch the baby unit on:

Press once quickly on the on/off button, the

night light will go on and the baby unit will be

switched on.

Connection OK:

When the parent unit and baby unit have

‘found’ a connection together, the connection

indicator ( )on the parent unit will light up

continuously.

Switch parent unit off:

Press the on/off button for more than 2 se-

conds to turn the parent unit off.

Lights up

continu-

ously

Press 2 seconds

Switch on

Flashes

Press quickly

Switch on

Press 2 seconds

switch off

Switch baby unit off:

Press the on/off for more than 2 seconds to

turn the baby unit off.

4.2 LISTENING:

If the baby unit detects sound, this sound is then sent to the parent

unit.

Receiving Volume:

Press the and keys on the parent unit

in order to set the volume level (5 levels +

sound off).

When the maximum or minimum volume has been reached an additional double beep

sound will be heard when pressing the + or - key.

Optical audio message:

If the volume on the parent unit is switched

off, the following icon located on the

parent unit will light up when the baby unit

detects a sound.

See also section 4.9 ‘Alert tones when the sound is off’.

4.3 CALL TONE TO THE PARENT UNIT:

You can use this feature to request assistance from the baby room or

to search for the parent unit if it is lost. Please note that the parent unit

must be switched on in order to receive any sounds.

Press the button on the baby unit for more

than a second in order to send 30 seconds

of call tones to the parent unit.

You can end the call tones by pressing once quickly on the button on the baby unit or

by pressing any key on the parent unit. The tones on the parent unit have a xed level

of volume regardless of the volume setting.

Press 2 seconds

switch off

>1sec.

4.4 TALK BACK:

Press the button on the parent unit to talk

back to the baby unit; let this button go again

in order to listen.

The talkback volume is xed and cannot be changed.

4.5 LULLABIES:

The baby unit has 5 different programmed lullabies. You can start and

stop the songs of your choice from the parent unit.

4.5.1 Start / stop:

Press the key.

Select the [Lullaby] option by using the

and keys.

Press 2x on the OK-button to start or stop

the play back of lullabies.

4.5.2 Selecting a lullaby:

Press the key.

Select the option [Lullaby] by using the

and buttons.

Press the OK button.

Select the option [Select New] using the

and buttons.

Inhaltsverzeichnis

Andere Alecto Babyphone Handbücher

Alecto

Alecto Hesdo DBX-90 Bedienungsanleitung

Alecto

Alecto DVM-120 Bedienungsanleitung

Alecto

Alecto DBX-112 Bedienungsanleitung

Alecto

Alecto DBX-90 Bedienungsanleitung

Alecto

Alecto DBX-60 Bedienungsanleitung

Alecto

Alecto DVM200C Bedienungsanleitung

Alecto

Alecto DBX-33 Bedienungsanleitung

Alecto

Alecto CYHA050100VWEU Bedienungsanleitung

Alecto

Alecto DVM-50 Bedienungsanleitung

Alecto

Alecto DBX-85 eco Bedienungsanleitung

Alecto

Alecto DBX-84 Bedienungsanleitung

Alecto

Alecto DVM-76 Bedienungsanleitung

Alecto

Alecto DVM-701 Bedienungsanleitung

Alecto

Alecto DVM-80 Bedienungsanleitung

Alecto

Alecto DBX-93 Bedienungsanleitung

Alecto

Alecto DVM-260+ Bedienungsanleitung

Alecto

Alecto DBX-57 Bedienungsanleitung

Alecto

Alecto DBX-99 Bedienungsanleitung

Alecto

Alecto DBX-77 Bedienungsanleitung

Alecto

Alecto DBX68GS Bedienungsanleitung

Alecto

Alecto DIVM-550 Bedienungsanleitung

Alecto

Alecto DVM-370 Bedienungsanleitung

Alecto

Alecto DBX120 Bedienungsanleitung

Alecto

Alecto DIVM-850 Bedienungsanleitung

Beliebte Babyphone Handbücher anderer Marken

Philips

Philips SCD 469 Bedienungsanleitung

Oricom

Oricom Babysense 7 Bedienungsanleitung

Levana

Levana TW502 Bedienungsanleitung

Luvion

Luvion Essential Bedienungsanleitung

Philips

Philips AVENT SCD841 Bedienungsanleitung

NUK

NUK Eco Control Video Display 550VD Bedienungsanleitung

Lorex

Lorex sweet peek mini Bedienungsanleitung

Mondevices

Mondevices MonBaby 2 Bedienungsanleitung

Famidoc

Famidoc FDBB-V2 Bedienungsanleitung

Graco

Graco iMonitor 2797 Bedienungsanleitung

babymoov

babymoov High Care A014001 Bedienungsanleitung

Ramili

Ramili RV1000 Bedienungsanleitung

Philips

Philips SBC SC364 Bedienungsanleitung

Swann

Swann SW231-FLO Bedienungsanleitung

Badabulle

Badabulle Baby Online 300 m+ Bedienungsanleitung

Philips AVENT

Philips AVENT SCD526/00 Bedienungsanleitung

Uniden

Uniden Guardian UBR223 Bedienungsanleitung

Summer

Summer Day & Night 28470A Bedienungsanleitung