Copyright 2005 Alfano, .A. Tous droits réservés.
7) Apply the sensor of temperature on the tyre as indicated on the screen by the arrow
(figure 5).
8) Press the central button to record the measured temperature and prepare the
Tyrecontrol on the next point of capture (Figure 6).
9) Operate this way until the end of the programmed sequence.
Note :
the point of capture asphalts will be chosen automatically at the end of every sequence,
« before and after race ».
10) ince the hold of the temperature asphalts, the Tyrecontrol returns automatically to
the menu « RECORD ».
Note : it is possible to program a sequence of capture (temperatures and pressures) in the order desired
(See Menu « SETUP » page 15, « configuration of the captures sequence ».
This menu consists in recalling the recorded data.
Procedure : I want to visualize the data of the vehicle 1 with the n° 117 assigned.
1) With the help of the buttons , select the icon « RECALL » (figure 8)
In the position « RECALL », the Tyrecontrol displays :
The hour and the date in real time
The pressures of the last « et » of vehicle 3
2) With the button or , select the icon « Vehi » (figure )
3) With the button or , select the vehicle wanted (figure )
In the position « VEHI », the Tyrecontrol displays :
The hour and the date of the last « et » of the Vehicle 1
The pressures of this « et »
