Allen-Bradley 22-COMM-E FRN 1.xxx Bedienungsanleitung

Dieses Handbuch passt für folgende Modelle

1

Inhaltsverzeichnis

Andere Allen-Bradley Adapter Handbücher

Allen-Bradley

Allen-Bradley PowerFlex 525 Bedienungsanleitung

Allen-Bradley

Allen-Bradley 2100-ENET Bedienungsanleitung

Allen-Bradley

Allen-Bradley 20-COMM-M Modbus/TCP Adapter Bedienungsanleitung

Allen-Bradley

Allen-Bradley Flex I/O Bedienungsanleitung

Allen-Bradley

Allen-Bradley 140G Series Bedienungsanleitung

Allen-Bradley

Allen-Bradley 1734-AENTR Bedienungsanleitung

Allen-Bradley

Allen-Bradley PLC-5 series Bedienungsanleitung

Allen-Bradley

Allen-Bradley PowerFlex 755T Bedienungsanleitung

Allen-Bradley

Allen-Bradley 140G Series Bedienungsanleitung

Allen-Bradley

Allen-Bradley ArmorPoint DeviceNet A Series Bedienungsanleitung

Allen-Bradley

Allen-Bradley POINT I/O ControlNet 1734-ACNR Bedienungsanleitung

Allen-Bradley

Allen-Bradley 140G Series Bedienungsanleitung

Allen-Bradley

Allen-Bradley 1738 ArmorPOINT Bedienungsanleitung

Allen-Bradley

Allen-Bradley E3 Plus Bedienungsanleitung

Allen-Bradley

Allen-Bradley 5069-AENTR Bedienungsanleitung

Allen-Bradley

Allen-Bradley PowerFlex 20-COMM-D Bedienungsanleitung

Allen-Bradley

Allen-Bradley ControlNet 1786-RPA/B Bedienungsanleitung

Allen-Bradley

Allen-Bradley POINT I/O 1734-AENT Bedienungsanleitung

Allen-Bradley

Allen-Bradley Series B Bedienungsanleitung

Allen-Bradley

Allen-Bradley PowerFlex 20-COMM-P Bedienungsanleitung

Allen-Bradley

Allen-Bradley Compact I/O 5069 series Bedienungsanleitung

Allen-Bradley

Allen-Bradley POINT I/O EtherNet/IP 1734-AENT Bedienungsanleitung

Allen-Bradley

Allen-Bradley FLEX I/O PROFIBUS 1794-APBDPV1 Bedienungsanleitung

Allen-Bradley

Allen-Bradley 1734-AENTRK Bedienungsanleitung

Beliebte Adapter Handbücher anderer Marken

PCB Piezotronics

PCB Piezotronics 090B274 Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt AT3-III E Bedienungsanleitung

Akribis

Akribis ITF-21-BISS-MIT Bedienungsanleitung

Auvidea

Auvidea J20 Produkthandbuch

Tenda

Tenda W54U Bedienungsanleitung

ROHO

ROHO AGILITY Bedienungsanleitung

PROLiNK

PROLiNK WN2001 Bedienungsanleitung

Hawking

Hawking HUF2 Bedienungsanleitung

Airlink101

Airlink101 AWLC4030 Bedienungsanleitung

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Bedienungsanleitung

Philips

Philips SWA4554S/10 Bedienungsanleitung

JVC

JVC TS-C9D2B Gebrauchsanweisung

NETGEAR

NETGEAR A6100 Bedienungsanleitung

D-Link

D-Link DWA-121 Bedienungsanleitung

Philips

Philips SWA2037 Bedienungsanleitung

Basalte

Basalte 0610-20 Bedienungsanleitung

Yealink

Yealink EHS40 Bedienungsanleitung

RCA

RCA AH57R Bedienungsanleitung

EtherNet/IP

Adapter

22-COMM-E

FRN 1.xxx

User Manual

Important User Information

Solid state equipment has operational characteristics differing from those of

electromechanical equipment. “Safety Guidelines for the Application, Installation

and Maintenance of Solid State Controls” (Publication SGI-1.1 available from

your local Rockwell Automation Sales Office or online at http://www.ab.com/

manuals/gi) describes some important differences between solid state equipment

and hard-wired electromechanical devices. Because of this difference, and also

because of the wide variety of uses for solid state equipment, all persons

responsible for applying this equipment must satisfy themselves that each intended

application of this equipment is acceptable.

In no event will Rockwell Automation, Inc. be responsible or liable for indirect or

consequential damages resulting from the use or application of this equipment.

The examples and diagrams in this manual are included solely for illustrative

purposes. Because of the many variables and requirements associated with any

particular installation, Rockwell Automation, Inc. cannot assume responsibility or

liability for actual use based on the examples and diagrams.

No patent liability is assumed by Rockwell Automation, Inc. with respect to use of

information, circuits, equipment, or software described in this manual.

Reproduction of the contents of this manual, in whole or in part, without written

permission of Rockwell Automation, Inc. is prohibited.

Throughout this manual we use notes to make you aware of safety considerations.

Attentions help you:

•identify a hazard

•avoid the hazard

•recognize the consequences

Important: Identifies information that is especially important for successful

application and understanding of the product.

ControlFLASH, DriveExplorer, DriveTools, DriveExecutive, PLC-5, SCANport, and SLC are trademarks of Rockwell

Automation, Inc.

Allen-Bradley, PowerFlex, and ControlLogix are registered trademarks of Rockwell Automation, Inc.

RSLinx, RSLogix, and RSNetWorx are trademarks of Rockwell Software.

Ethernet is a trademark of Digital Equipment Corporation, Intel Corporation, and Xerox Corporation.

Netscape and Netscape Navigator are registered trademarks of the Netscape Communications Corporation.

Windows, Windows CE, Windows NT, and Microsoft are either registered trademarks or trademarks of Microsoft Corporation.

!

ATTENTION: Identifies information about practices or circumstances

that can lead to personal injury or death, property damage, or economic

loss.

Shock Hazard labels may be located on or inside the drive to alert

people that dangerous voltage may be present.

Summary of Changes

The information below summarizes the changes made to this manual

since its first release (December 2003) of the EtherNet/IP adapter FRN

1.xxx:

Description of Changes Page(s)

Corrected the values in the Input Size and Output Size columns in

Table 4.A.

4-6

S-ii Summary of Changes

Table of Contents

Preface About This Manual

Related Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-1

Conventions Used in this Manual . . . . . . . . . . . . . . . . . . . . . P-2

Rockwell Automation Support. . . . . . . . . . . . . . . . . . . . . . . . P-2

Chapter 1 Getting Started

Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

Compatible Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3

Required Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3

Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4

Quick Start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5

Modes of Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6

Chapter 2 Installing the Adapter

Preparing for an Installation. . . . . . . . . . . . . . . . . . . . . . . . . . 2-1

Setting Operating Mode and Web Pages Switches . . . . . . . . 2-1

Connecting the Adapter to the Network . . . . . . . . . . . . . . . . 2-3

Connecting the Adapter to the Drive . . . . . . . . . . . . . . . . . . . 2-4

Applying Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6

Commissioning the Adapter. . . . . . . . . . . . . . . . . . . . . . . . . . 2-6

Chapter 3 Configuring the Adapter

Configuration Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1

Using the PowerFlex 4-Class HIM . . . . . . . . . . . . . . . . . . . . 3-2

Using BOOTP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3

Setting the IP Address, Subnet Mask, and Gateway Address 3-5

Setting the Data Rate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7

Setting the I/O Configuration. . . . . . . . . . . . . . . . . . . . . . . . . 3-7

Setting a Fault Action . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8

Setting Web Features Access . . . . . . . . . . . . . . . . . . . . . . . . 3-10

Resetting the Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-11

Viewing the Adapter Configuration . . . . . . . . . . . . . . . . . . . 3-12

Chapter 4 Configuring the Scanner or Bridge

Example Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1

Adding a Bridge or Scanner to the I/O Configuration . . . . . . 4-2

Adding the Adapter and Drive to the I/O Configuration . . . . 4-4

Saving the Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7

ii Table of Contents

Chapter 5 Using I/O Messaging

About I/O Messaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1

Understanding the I/O Image. . . . . . . . . . . . . . . . . . . . . . . . . 5-2

Using Logic Command/Status . . . . . . . . . . . . . . . . . . . . . . . . 5-2

Using Reference/Feedback . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3

Example Ladder Logic Program . . . . . . . . . . . . . . . . . . . . . . 5-3

Chapter 6 Using Explicit Messaging

About Explicit Messaging . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1

Formatting Explicit Messages . . . . . . . . . . . . . . . . . . . . . . . . 6-2

Performing Explicit Messages . . . . . . . . . . . . . . . . . . . . . . . . 6-4

About the Example Explicit Messages . . . . . . . . . . . . . . . . . 6-5

Example Get Attribute Single Message . . . . . . . . . . . . . . . . . 6-6

Example Set Attribute Single Message . . . . . . . . . . . . . . . . . 6-8

Chapter 7 Using Multi-Drive Mode

Single Mode vs. Multi-Drive Mode . . . . . . . . . . . . . . . . . . . . 7-1

System Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-3

Understanding the I/O Image. . . . . . . . . . . . . . . . . . . . . . . . . 7-4

Configuring the RS-485 Network . . . . . . . . . . . . . . . . . . . . . 7-5

Multi-Drive Ladder Logic Program Example . . . . . . . . . . . . 7-6

ControlLogix Example. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-7

Multi-Drive Mode Explicit Messaging . . . . . . . . . . . . . . . . 7-20

Additional Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-22

Chapter 8 Troubleshooting

Locating the Status Indicators . . . . . . . . . . . . . . . . . . . . . . . . 8-1

PORT Status Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-2

MOD Status Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-3

Net A Status Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-4

Net B Status Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-5

Adapter Diagnostic Items in Single Drive Mode . . . . . . . . . 8-5

Adapter Diagnostic Items in Multi-Drive Mode . . . . . . . . . . 8-7

Viewing and Clearing Events. . . . . . . . . . . . . . . . . . . . . . . . . 8-8

Chapter 9 Viewing the Adapter’s Web Pages

Accessing the Adapter’s Web Home Page . . . . . . . . . . . . . . . 9-1

Process Display Pop-up Windows . . . . . . . . . . . . . . . . . . . . . 9-6

TCP/IP Configuration Web Page . . . . . . . . . . . . . . . . . . . . . . 9-7

Configure E-mail Notification Web Page . . . . . . . . . . . . . . . 9-8

Configure Process Display Web Page . . . . . . . . . . . . . . . . . 9-10

DSI Device Information Pages. . . . . . . . . . . . . . . . . . . . . . . 9-11

Table of Contents iii

Appendix A Specifications

Communications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1

Electrical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1

Mechanical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1

Environmental . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2

Regulatory Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2

Appendix B Adapter Parameters

About Parameter Numbers. . . . . . . . . . . . . . . . . . . . . . . . . . . B-1

Parameter List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-1

Appendix C EtherNet/IP Objects

Identity Object . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-2

Assembly Object . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-4

Register Object. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-6

Parameter Object . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-9

Parameter Group Object. . . . . . . . . . . . . . . . . . . . . . . . . . . . C-13

PCCC Object . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-15

DPI Device Object . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-21

DPI Parameter Object . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-24

DPI Fault Object . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-28

DPI Diagnostic Object . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-30

TCP/IP Interface Object. . . . . . . . . . . . . . . . . . . . . . . . . . . . C-32

Ethernet Link Object . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-34

Appendix D Logic Command/Status Words

PowerFlex 4 and PowerFlex 40 Drives . . . . . . . . . . . . . . . . D-1

Glossary

Index

iv Table of Contents

Preface

About This Manual

Documentation can be obtained online at http://www.ab.com/manuals.

Topic Page

Related Documentation P-1

Conventions Used in this Manual P-2

Rockwell Automation Support P-2

Related Documentation

For: Refer to: Publication

EtherNet/IP EtherNet/IP Planning and Installation Manual

EtherNet/IP Performance and Application Guide

ENET-IN001…

ENET-AP001…

DriveExplorer™ http://www.ab.com/drives/driveexplorer, and

DriveExplorer Online Help (installed with the software)

—

DriveTools™ SP http://www.ab.com/drives/drivetools, and

DriveTools SP Online Help (installed with the software)

—

HIM HIM Quick Reference 22HIM-QR001…

PowerFlex®4 Drive PowerFlex 4 User Manual

PowerFlex 4 Quick Start

22A-UM001…

22A-QS001…

PowerFlex®40 Drive PowerFlex 40 User Manual

PowerFlex 40 Quick Start

22B-UM001…

22B-QS001…

RSLinx™ Getting Results with RSLinx Guide

Online help (installed with the software)

LINX-GR001…

RSLogix™ 5 RSLogix 5 Getting Results Guide

Online help (installed with the software)

LG5-GR001…

RSLogix™ 500 RSLogix 500 Getting Results Guide

Online help (installed with the software)

LG500-GR001

…

RSLogix™ 5000 RSLogix 5000 Getting Results Guide

Online help (installed with the software)

9399-RLD300G

R

RSNetWorx™ for

EtherNet/IP

RSNetWorx for EtherNet/IP Getting Results Guide

Online help (installed with the software)

ENET-GR001…

ControlLogix™ and

1756-ENBT or

1756-ENET/B

ControlLogix EtherNet Bridge Module User Manual

ControlLogix EtherNet Communications Module User Manual

1756-UM050…

1756-UM051…

P-2 About This Manual

The following conventions are used throughout this manual:

•Parameter names are shown in the format Parameter xx - [*]. The xx

represents the parameter number. The * represents the parameter

name. For example Parameter 01 - [Mode].

•Menu commands are shown in bold type face and follow the format

Menu > Command. For example, if you read “Select File > Open,”

you should click the File menu and then click the Open command.

•The firmware release is displayed as FRN X.xxx. The “FRN”

signifies Firmware Release Number. The “X” is the major release

number. The “xxx” is the minor update number.

•RSNetWorx for EtherNet/IP (version 4.01), RSLinx (version 2.40),

and RSLogix5000 (version 11) were used for the screen shots in this

manual. Different versions of the software may differ in appearance

and procedures.

•This manual provides information about the 22-COMM-E EtherNet/

IP adapter and using it with PowerFlex 40 drives. The adapter can be

used with other products that support an internal DSI adapter. Refer to

the documentation for your product for specific information about

how it works with the adapter.

Rockwell Automation, Inc. offers support services worldwide, with over

75 sales/support offices, over 500 authorized distributors, and over 250

authorized systems integrators located through the United States alone.

In addition, Rockwell Automation, Inc. representatives are in every

major country in the world.

Local Product Support

Contact your local Rockwell Automation, Inc. representative for:

•Sales and order support

•Product technical training

•Warranty support

•Support service agreements.

Conventions Used in this Manual

Rockwell Automation Support