Allen-Bradley 1747-OC Series Bedienungsanleitung

1747-OC Series

Open Controllers

1747-OCE, -OCF

User Manual

Allen-Bradley HMIs

Important User Information

Because of the variety of uses for the products described in this

publication, those responsible for the application and use of this control

equipment must satisfy themselves that all necessary steps have been

taken to assure that each application and use meets all performance and

safetyrequirements,includinganyapplicablelaws,regulations,codesand

standards.

The illustrations, charts, sample programs and layout examples shown in

this guide are intended solely for purposes of example. Since there are

many variables and requirements associated with any particular

installation, Allen-Bradley does not assume responsibility or liability (to

include intellectual property liability) for actual use based upon the

examples shown in this publication.

Allen-Bradley publication SGI-1.1, Safety Guidelines for the Application,

Installation and Maintenance of Solid-State Control (available from your

localAllen-Bradleyoffice),describessomeimportantdifferencesbetween

solid-state equipmentandelectromechanicaldevicesthatshouldbetaken

into consideration when applying products such as those described in this

publication.

Reproduction of the contents of this copyrighted publication, in whole

or part, without written permission of Rockwell Automation, is

prohibited.

Throughout this manual we use notes to make you aware of safety

considerations:

Attention statements help you to:

•identify a hazard

•avoid a hazard

•recognize the consequences

ATTENTION: Identifies information about practices or

circumstances that can lead to personal injury or death,

property damage or economic loss

Important: Identifies information that is critical for successful

application and understanding of the product.

European Communities (EC)

Directive Compliance

If this product has the CE mark it is approved for installation within the

European Union and EEA regions. It has been designed and tested to

meet the following directives.

EMC Directive

This product is tested to meet the Council Directive 89/336/EC

Electromagnetic Compatibility (EMC) by applying the following

standards, in whole or in part, documented in a technical construction

file:

•EN 50081-2 EMC — Generic Emission Standard, Part 2 —

Industrial Environment

•EN 50082-2 EMC — Generic Immunity Standard, Part 2 —

Industrial Environment

This product is intended for use in an industrial environment.

Low Voltage Directive

This product is tested to meet Council Directive 73/23/EEC Low

Voltage, by applying the safety requirements of EN 61131-2

Programmable Controllers, Part 2 - Equipment Requirements and Tests.

For specific information required by EN 61131-2, see the appropriate

sections in this publication, as well as the Allen-Bradley publication

Industrial Automation Wiring and Grounding Guidelines For Noise

Immunity, publication 1770-4.1.

This equipment is classified as open equipment and must be mounted in

an enclosure during operation to provide safety protection.

Allen-Bradley HMIs

1747-UM001A-US-P - March 2000

Summary of Changes

This manual has been updated throughout to include the new 1747-OCF

266MHz Open Controller.

New Information The table below shows where to find new information on the 1747-OCF

266MHz Open Controller.

For this new information: See Chapter:

comparing the 1747-OCE and 1747-OCF open controllers 1

compatibility issues between open controller models 1

setting the battery enable and scanner configuration jumpers 2

using the 1747-OCF BIOS 3

booting options for the 1747-OCF 4

defining interrupts and drive types 5

operating system considerations 5

installing software 6

using the USB port 7

using the diagnostic utility 8

specifications A

loading Windows NT on your 1747-OCF open controller B

Allen-Bradley HMIs

1747-UM001A-US-P - March 2000

SOC-2 Summary of Changes

Notes:

1747-UM001A-US-P - March 2000

Preface

Using This Manual

Who Should Use This Manual Use this manual if you are responsible for designing, installing,

programming, or troubleshooting control systems that use the

Allen-Bradley open controller.

This manual is a guide for using the open controller. How you program the

open controller or how your application functions depends on the software

options you install on the open controller.

Additional Open Controller

Documentation

The following documents are available for additional information about the

open controller and its options.

This document:

Has this publication

number:

Open Controller User Manual 1747-UM001A-US-P

1747-OC Open Controller System Quick Start 1747-10.3

1747-OC 266MHz Open Controller System Quick Start 1747-10.6

Open Controller PCI Expansion Bus Installation Instructions 1747-5.16

Open Controller Video Interface Module Installation Instructions 1747-5.15

Open Controller Video and Ethernet Interface Module Installation

Instructions

1747-5.37

Open Controller Ethernet Interface Module Installation Instructions 1747-5.40

Open Controller PCMCIA Interface Module Installation Instructions 1747-5.13

Open Controller A-B Communication Interface Module Installation

Instructions

1747-5.14

Open Controller A-B Communication Interface Module User

Manual

1747-6.18

Adding an Embedded IDE Drive to 1747-OC Series Open

Controllers Installation Instructions

1747-IN002A-US-P

Adding System Memory to 1747-OC Series Open Controllers

Installation Instructions

1747-IN003A-US-P

Open Controller Chassis Fan Installation Instructions 1747-5.23

Open Controller IDE Interface Module for IDE-Compatible ATA

Devices (PC Cards) Installation Instructions

1747-5.29

Open Controller IDE Interface Module for an Internally-Mounted

2.5” ATA Drive Installation Instructions

1747-5.30

1747-OCE Open Controller API Software User Manual 1747-6.19

1746 I/O Interface and 1747-OCF Open Controller API Software

User Manual

1747-UM002A-US-P

Allen-Bradley HMIs

1747-UM001A-US-P - March 2000

P-2 Using This Manual

Each open controller component ships with installation instructions. The

user manuals and installation instructions are available from The

Automation Bookstore (www.theautomationbookstore.com) so you can

order or download as many copies as you need.

In addition to the above documentation, the:

•1747-OCVGA1 video interface module and 1747-OCVGAE video and

Ethernet interface module include a disk with documentation for the

video drivers

•1747-OCPCM2 PCMCIA interface module includes a disk with

CardSoftdocumentation.

Reference Material The following books might be useful as you develop your open controller

applications:

This document: By: Has this ISBN number:

PC System Architecture Series

PCI System Architecture

MindShare, Inc.

Addison-Wesley Publishing Company

ISBN: 0-201-40993-3

PC System Architecture Series

ISA System Architecture

MindShare, Inc.

Addison-Wesley Publishing Company

ISBN: 0-201-40996-8

PC System Architecture Series

PCMCIA System Architecture

MindShare, Inc.

Addison-Wesley Publishing Company

ISBN: 0-201-40991-7

The PCMCIA Developer’s Guide Michael T. Mori and W. Dean Welder ISBN: 0-9640342-1-2

PCI Hardware and Software Architecture and Design Edward Solari and George Willse ISBN: 0-929392-28-0

Table of Contents

Chapter 1

Introducing the Open Controller

Introducing the Open Controller CPU Module . . . . . . . . . . 1-1

Understanding the Open Controller Architecture . . . . . . . . 1-3

Communicating with the Open Controller . . . . . . . . . . . . . 1-5

Using the API software. . . . . . . . . . . . . . . . . . . . . . . . . 1-5

Compatibility Issues . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6

Open controller PCI-based option modules. . . . . . . . . . 1-6

Resource allocation . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6

DOS API considerations . . . . . . . . . . . . . . . . . . . . . . . . 1-7

Windows NT API considerations. . . . . . . . . . . . . . . . . . 1-7

Software not using the APIs . . . . . . . . . . . . . . . . . . . . . 1-8

Hardware differences . . . . . . . . . . . . . . . . . . . . . . . . . . 1-8

Summary of API Differences. . . . . . . . . . . . . . . . . . . . . 1-9

Chapter 2

Installing the Open Controller

CPU Module

Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1

Preparing the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2

1747-OCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2

1747-OCF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2

Setting Jumpers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3

Installing System Memory . . . . . . . . . . . . . . . . . . . . . . . . . 2-4

Installing an Embedded IDE (Flash) Drive . . . . . . . . . . . . . 2-4

1747-OCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4

1747-OCF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6

Changing the LED mask . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6

Inserting the Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7

Chapter 3

Modifying BIOS Settings

Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1

Preparing the Open Controller. . . . . . . . . . . . . . . . . . . . . . 3-1

Changing BIOS Settings (using Open Controller Video

Module and Keyboard) . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2

Navigating the menu system. . . . . . . . . . . . . . . . . . . . . 3-2

Using the BIOS main menu on the 1747-OCE . . . . . . . . 3-3

Using the BIOS main menu on the 1747-OCF . . . . . . . . 3-4

Saving BIOS Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4

Storing BIOS Settings . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4

Restoring BIOS settings . . . . . . . . . . . . . . . . . . . . . . . . 3-4

Remote BIOS setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5

Default BIOS Settings for the 1747-OCE . . . . . . . . . . . . . . . 3-7

Default BIOS Settings for the 1747-OCF . . . . . . . . . . . . . . . 3-12

Configuring BIOS for a Primary Drive in an

IDE Interface Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-15

Allen-Bradley HMIs

Publication 1747-UM001A-US-P - March 2000

toc-ii Table of Contents

Chapter 4

Starting the Open Controller

Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1

Powering Up an Open Controller CPU Module. . . . . . . . . . 4-1

Booting when an operating system is loaded . . . . . . . . 4-3

Booting when an operating system is not loaded . . . . . 4-3

Booting from a remote PC through COM2. . . . . . . . . . . 4-5

Booting from a PC Card in a PCMCIA interface module. 4-7

Booting from an external, parallel-port floppy. . . . . . . . 4-10

Chapter 5

Defining System Settings

Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1

Defining System Interrupts . . . . . . . . . . . . . . . . . . . . . . . . 5-1

How ISA/EISA interrupts and PCI/PnP interrupts interact 5-2

Defining the primary IRQ (IRQ 14). . . . . . . . . . . . . . . . 5-4

Defining the secondary IRQ (IRQ 15) . . . . . . . . . . . . . . 5-4

Defining the interrupts for PC Cards in PCMCIA

interface modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5

Defining interrupts for a 1747-OCKTX,

-OCKTXD module . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5

Defining interrupts for the open controller SCANNER . . 5-7

Defining Drive Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-7

Using primary drives . . . . . . . . . . . . . . . . . . . . . . . . . . 5-8

Using secondary drives . . . . . . . . . . . . . . . . . . . . . . . . 5-8

Using 3.5” IDE devices. . . . . . . . . . . . . . . . . . . . . . . . . 5-8

Using Memory Managers . . . . . . . . . . . . . . . . . . . . . . . . . . 5-9

Operating System Considerations. . . . . . . . . . . . . . . . . . . . 5-9

Chapter 6

Installing Software

Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1

Installing Software onto a Native IDE Drive . . . . . . . . . . . . 6-1

Installing software from a remote PC through COM2 . . . 6-3

Installing software through DOS interlnk . . . . . . . . . . . 6-5

Installing software from an external, parallel-port floppy 6-6

Installing software from an external, parallel-port

SCSI device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7

Installing software from a PCMCIA CD-ROM or

ATA memory device . . . . . . . . . . . . . . . . . . . . . . . . . . 6-8

Installing software from an external, IDE-compatible device6-9

Temporarily installing the native IDE drive in another PC6-11

Installing Operating Systems . . . . . . . . . . . . . . . . . . . . . . . 6-15

Installing Windows NT . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-16

Adding hardware to load Windows NT on the

open controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-16

Adjusting the standard installation procedure to load

Windows NT on the open controller. . . . . . . . . . . . . . . 6-17

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Allen-Bradley Controller Handbücher

Allen-Bradley

Allen-Bradley SLC 500 Bedienungsanleitung

Allen-Bradley

Allen-Bradley GuardLogix Bedienungsanleitung

Allen-Bradley

Allen-Bradley GuardPLC 160 Bedienungsanleitung

Allen-Bradley

Allen-Bradley PowerFlex 755TL Bedienungsanleitung

Allen-Bradley

Allen-Bradley Micro800 Gebrauchsanweisung

Allen-Bradley

Allen-Bradley PowerFlex 400 Bedienungsanleitung

Allen-Bradley

Allen-Bradley CompactLogix 5480 Bedienungsanleitung

Allen-Bradley

Allen-Bradley PowerFlex 400 Gebrauchsanweisung

Allen-Bradley

Allen-Bradley PowerFlex 400 Bedienungsanleitung

Allen-Bradley

Allen-Bradley ProcessLogix 1757-PLX52 Bedienungsanleitung

Allen-Bradley

Allen-Bradley PanelView 800 Bedienungsanleitung

Allen-Bradley

Allen-Bradley SLC 500 Series Bedienungsanleitung

Allen-Bradley

Allen-Bradley iTRAK 5730 Bedienungsanleitung

Allen-Bradley

Allen-Bradley Micro830 Bedienungsanleitung

Allen-Bradley

Allen-Bradley PowerFlex 527 Bedienungsanleitung

Allen-Bradley

Allen-Bradley PowerFlex AFE Bedienungsanleitung

Allen-Bradley

Allen-Bradley CompactLogix 5380 Bedienungsanleitung

Allen-Bradley

Allen-Bradley 1305 Series Bedienungsanleitung

Allen-Bradley

Allen-Bradley SLC 500 Series Bedienungsanleitung

Allen-Bradley

Allen-Bradley PowerFlex 400 Bedienerhandbuch

Allen-Bradley

Allen-Bradley FlexPak 3000 Bedienungsanleitung

Allen-Bradley

Allen-Bradley 2080-LC10-12AWA Bedienungsanleitung

Allen-Bradley

Allen-Bradley PowerFlex 700S Bedienungsanleitung

Allen-Bradley

Allen-Bradley PowerFlex 4 Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung

KUHN

KUHN TKS Bedienungsanleitung

S&C

S&C PMH Bedienungs- und Wartungshandbuch