Allen-Bradley ControlLogix 5570 series Bedienungsanleitung

ControlLogix Redundancy Update and Module Replacement

Guidelines

Product Family ControlLogix 5570 Controllers

Reference Manual

Original Instructions

Important User Information

Read this document and the documents listed in the additional resources section about installation, configuration, and

operation of this equipment before you install, configure, operate, or maintain this product. Users are required to

familiarize themselves with installation and wiring instructions in addition to requirements of all applicable codes, laws,

and standards.

Activities including installation, adjustments, putting into service, use, assembly, disassembly, and maintenance are

required to be carried out by suitably trained personnel in accordance with applicable code of practice.

If this equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment may

be impaired.

In no event will Rockwell Automation, Inc. be responsible or liable for indirect or consequential damages resulting from

the use or application of this equipment.

The examples and diagrams in this manual are included solely for illustrative purposes. Because of the many variables and

requirements associated with any particular installation, Rockwell Automation, Inc. cannot assume responsibility or

liability for actual use based on the examples and diagrams.

No patent liability is assumed by Rockwell Automation, Inc. with respect to use of information, circuits, equipment, or

software described in this manual.

Reproduction of the contents of this manual, in whole or in part, without written permission of Rockwell Automation,

Inc., is prohibited

Throughout this manual, when necessary, we use notes to make you aware of safety considerations.

Labels may also be on or inside the equipment to provide specific precautions.

WARNING: Identifies information about practices or circumstances that can cause an explosion in a hazardous

environment, which may lead to personal injury or death, property damage, or economic loss.

ATTENTION: Identifies information about practices or circumstances that can lead to personal injury or death, property

damage, or economic loss. Attentions help you identify a hazard, avoid a hazard, and recognize the consequence.

IMPORTANT Identifies information that is critical for successful application and understanding of the product.

SHOCK HAZARD: Labels may be on or inside the equipment, for example, a drive or motor, to alert people that dangerous

voltage may be present.

BURN HAZARD: Labels may be on or inside the equipment, for example, a drive or motor, to alert people that surfaces may

reach dangerous temperatures.

ARC FLASH HAZARD: Labels may be on or inside the equipment, for example, a motor control center, to alert people to

potential Arc Flash. Arc Flash will cause severe injury or death. Wear proper Personal Protective Equipment (PPE). Follow ALL

Regulatory requirements for safe work practices and for Personal Protective Equipment (PPE).

Rockwell Automation Publication 1756-RM010C-EN-P - August 2018 3

Table of Contents

Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Summary of Changes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Modernization Services and Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Additional Resources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Chapter 1

Update Considerations Before You Begin. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

LINT Members Must Align on 8-byte Boundaries . . . . . . . . . . . . 8

I/O Modules in Redundancy Systems . . . . . . . . . . . . . . . . . . . . . . . . 9

Verify Your RMCT Version. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Download and Install ControlFLASH Software . . . . . . . . . . . . . . . . . 11

Download the Redundancy Firmware Bundle and RMCT. . . . . . . . 11

Install the Redundancy Firmware Bundle . . . . . . . . . . . . . . . . . . . . . . . 14

Install the Revision 24.052 Redundancy Firmware Bundle . . . . 14

Install the Revision 30.051 Redundancy Firmware Bundle . . . . 16

Install the Revision 31.052 Redundancy Firmware Bundle . . . . 18

Install the Redundancy Module Configuration Tool . . . . . . . . . . . . . 19

Install the Logix Designer Application . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Prepare the Controller Project for the Update . . . . . . . . . . . . . . . . . . . 21

Update the Redundancy System Firmware . . . . . . . . . . . . . . . . . . . . . . 23

Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Prepare the Redundant Chassis for the Firmware Update . . . . . 24

Update the Redundancy Module Firmware in the

Primary Chassis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Update Redundancy Module Firmware and Other Module

Firmware in the Secondary Chassis. . . . . . . . . . . . . . . . . . . . . . . . . . 28

Lock the System and Initiate a Switchover to Update . . . . . . . . . 30

Update the New Secondary Chassis Firmware . . . . . . . . . . . . . . . 32

Synchronize the Redundant Chassis. . . . . . . . . . . . . . . . . . . . . . . . . 34

EDS Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Chapter 2

Replacement Considerations Before You Begin. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Replace a Module in the Secondary Chassis That Has the

Same Catalog Number and Firmware Revision . . . . . . . . . . . . . . . . . . 38

Replace an EtherNet/IP Module with a New Series . . . . . . . . . . . . . . 39

Synchronization and Switchover for EtherNet/IP Modules . . . 39

Replace a 1756-CN2 Module with a New Series . . . . . . . . . . . . . . . . . 44

Synchronization and Switchover for the ControlNet Modules 44

Replace a 1756-RM Module with a 1756-RM2 Module . . . . . . . . . . 49

4Rockwell Automation Publication 1756-RM010C-EN-P - August 2018

Table of Contents

Appendix A

Align LINT Members on 8-byte

Boundaries

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Rockwell Automation Publication 1756-RM010C-EN-P - August 2018 5

Preface

Summary of Changes This table contains the changes that were made to this revision.

Overview This publication provides instructions for replacing modules or updating

firmware in a powered-up and running redundancy system.

The following requirements must be met:

• The redundancy system is being updated to redundancy revision

24.052_kit1 or later.

• If doing online updates, you must go in the following revision order:

V20.05x > V24.052 > V30.051 (or later version in V30) > V31.052

(or later version in V31)

• Online updates are only permitted for updates from revision 20.054 or

later.

• Online updates are only permitted with a ControlLogix® 5570

controller (in both the previous release and the new release, in both the

primary and secondary chassis).

• A replacement ControlLogix 5570 controller must have memory equal

to or greater than the memory in the partner ControlLogix 5570

controller.

You can access release notes for each redundancy firmware revision from the

Rockwell Automation Product Compatibility and Download Center

(PCDC). Go to http://www.rockwellautomation.com/global/support/

pcdc.page, and search for your redundancy firmware revision.

In a redundant system, modules can be replaced, and firmware can be updated

using either of the following methods:

•Method 1: Modules are replaced and firmware is updated while the

redundancy system is powered up and the controllers are left in RUN

mode. In this case, this publication applies.

•Method 2: If you power down the redundancy system or take

controllers out of RUN mode to replace modules, then this method is

similar to a new installation and this publication does not apply. Instead,

see the ControlLogix Redundancy User Manual, publication

1756-UM535, and install the modules, firmware, and application

software versions for the appropriate revision for your installation.

Compatible module firmware revisions and software versions are listed

in the Release Notes for the appropriate redundancy firmware revision.

For instructions to update to revisions previous to 24.052_kit1, see the

appropriate Release Notes in the PCDC at:

http://www.rockwellautomation.com/global/support/pcdc.page.

Topic Page

Added references to redundancy firmware revision 31.052 Throughout

Added references to ControlFLASH Plus™ software Throughout

Added section: Install the Revision 31.052 Redundancy Firmware Bundle Page 18

6Rockwell Automation Publication 1756-RM010C-EN-P - August 2018

Preface

Modernization Services and

Tools

Throughout the product lifecycle, as products mature, Rockwell Automation

is there as your partner to help you get the most out of your current equipment.

Rockwell Automation also helps you determine your next steps and lay out a

plan for the transition to newer technology.

Rockwell Automation has the tools and the experience to guide you through

the transition, whether you choose to modernize all at once or use our unique,

phased approach.

For more information, see the modernization Solutions Brochure,

publication MIGRAT-BR002.

For tools that assist with planning and configuring an Integrated Architecture®

system, see http://www.rockwellautomation.com/rockwellautomation/

products-technologies/integrated-architecture/tools/overview.page?#/tab1

Additional Resources These documents contain additional information concerning related products

from Rockwell Automation.

You can view or download publications at

http:/www.rockwellautomation.com/literature/.

To order paper copies of technical documentation, contact your local

Allen-Bradley distributor or Rockwell Automation sales representative.

Resource Description

1756 ControlLogix Controllers Specifications Technical Data, publication 1756-TD001 Technical specifications for ControlLogix controllers and accessories, including

redundancy modules.

ControlLogix Redundancy User Manual, publication 1756-UM535 Provides information to install, configure, and use redundancy systems.

ControlFLASH Firmware Upgrade Kit User Manual, publication 1756-UM105 Provides information on ControlFLASH™ software.

ControlFLASH Plus Quick Start Guide, publication CFP-QS001 Provides information on ControlFLASH Plus software.

Modernization Solutions Brochure, publication MIGRAT-BR002 Provides information about modernization.

Integrated Architecture Tools and Resources website,

http://www.rockwellautomation.com/global/products-technologies/integrated-

architecture/tools/overview.page?#/tab1

Provides Integrated Architecture tools and information.

Industrial Automation Wiring and Grounding Guidelines, publication 1770-4.1 General guidelines for installing a Rockwell Automation industrial system.

Product Certifications website,

http://www.rockwellautomation.com/global/certification/overview.page

Declarations of conformity, certificates, and other certification details.

Rockwell Automation Publication 1756-RM010C-EN-P - August 2018 7

Chapter 1

Update Considerations

Before You Begin When updating products in a ControlLogix® redundancy system, you must:

• Download and install the appropriate redundancy firmware bundle, and

the compatible versions of the Studio 5000 Logix Designer® application,

RSLinx® Classic, ControlFLASH™ or ControlFLASH Plus™ software,

and the Redundancy Module Configuration Tool (RMCT)

• Update the firmware on the redundancy modules, controllers, and

communication modules in the redundancy chassis pair.

• Update the revision of controller and communication module firmware

in the redundancy application project.

Topic Page

Before You Begin 7

Download and Install ControlFLASH Software 11

Download the Redundancy Firmware Bundle and RMCT 11

Install the Redundancy Firmware Bundle 14

Install the Redundancy Module Configuration Tool 19

Install the Logix Designer Application 20

Prepare the Controller Project for the Update 21

Update the Redundancy System Firmware 23

IMPORTANT If you are migrating from an existing revision 30.051 redundancy

application, use Studio 5000 Logix Designer version 30.01.00 or newer.

Version 30.00.00 has a known anomaly (Lgx00191976) that prevents you

from uploading redundancy projects to a new file, which can interfere with

the update process.

8Rockwell Automation Publication 1756-RM010C-EN-P - August 2018

Chapter 1 Update Considerations

LINT Members Must Align on 8-byte Boundaries

Beginning with version 27 of the Studio 5000 Logix Designer application,

LINT members must be aligned on 8-byte boundaries, and User-defined Data

Types (UDT) that contain LINT members must be sized as a multiple of 8

bytes.

This change impacts your Logix Designer application project if any of the

following situations are true:

• You migrate a standard project, version 26 or earlier, to a redundancy

project that is version 30.051 or later, and you have LINT tags inside a

UDT.

• You migrate a redundancy project, version 24.052 or earlier, to a project

that is version 30.051 or later, and you have LINT tags inside a UDT.

• You use a tag with LINT members as a producer, and at least one

consumer (controller) has firmware earlier than version 27.

• You use a tag with LINT members as a consumer, and the producer

(controller) has firmware earlier than version 27.

For more information, see these resources:

•Align LINT Members on 8-byte Boundaries on page 51

• Logix Designer online help topic: ‘LINT data types within this tag now

align on 8-byte boundaries. Check produce/consume connection’.

IMPORTANT If you have User-defined Data Types (UDT) that contain LINT members, you

may not be able perform the online Redundancy System Update. See the

ControlLogix Redundancy User Manual, publication 1756-UM535, on how to

install and update the modules, firmware, and application software versions

while offline.

IMPORTANT If you attempt to perform a Redundancy System Update from version 24.05x

to version 30.051 or later, and you have LINT tags inside a UDT, the Lock for

Update attempt can fail.

Rockwell Automation Publication 1756-RM010C-EN-P - August 2018 9

Update Considerations Chapter 1

I/O Modules in Redundancy Systems

In a redundancy system, you can use only I/O modules in a remote chassis. You

cannot use I/O modules in the redundant chassis pair.

This table describes the I/O modules that redundancy systems support.

Verify Your RMCT Version

Complete these steps to check or verify the version of the RMCT you have

installed.

1. Launch RSLinx Classic software.

2. Click the RSWho icon.

Remote I/O Module Placement Revision 20.054 and Later

EtherNet/IP™ I/O network x

1715 Redundant I/O system x

ControlNet® network x

DeviceNet® network(1)

(1)In a redundancy system, you can access remote I/O modules on this network only via a ControlNet or

EtherNet/IP network bridge.

Data Highway Plus™(1) network x

Universal remote I/O(1) x

IMPORTANT If you have RMCT version 7 or earlier, it does not support the 1756-RM2

modules. more information on the RMCT, see Knowledgebase article 29511.

IMPORTANT You must uninstall any existing version of the Redundancy Module

Configuration Tool (RMCT) before you install the RMCT, version 8.4.1.0 or

later. If you do not uninstall the previous version, you can have difficulty if

you try to uninstall version 8.4.1.0 or later at another time.

TIP If Module Configuration is not available in the list of options, RMCT version 8

has not been installed.

10 Rockwell Automation Publication 1756-RM010C-EN-P - August 2018

Chapter 1 Update Considerations

3. Right-click your redundancy module and choose Module

Configuration.

The Module Configuration dialog box opens.

4. Right-click the title bar and choose About.

The About dialog box opens and indicates the RMCT version.

TIP The RMCT launches at the version that is compatible with the 1756-RM2

or 1756-RM2XT redundancy module firmware that is installed.

You must update your RMCT version and the redundancy module

firmware revision so it is compatible with the new RMCT version. If you

do not perform this update, the About dialog box cannot reflect the new

RMCT version.

Inhaltsverzeichnis

Andere Allen-Bradley Controller Handbücher

Allen-Bradley

Allen-Bradley PLC-5 series Bedienungsanleitung

Allen-Bradley

Allen-Bradley Bulletin 505 Bedienungsanleitung

Allen-Bradley

Allen-Bradley Micro830 Bedienungsanleitung

Allen-Bradley

Allen-Bradley PowerFlex 70 Bedienungsanleitung

Allen-Bradley

Allen-Bradley 1747-OC Series Bedienungsanleitung

Allen-Bradley

Allen-Bradley Micro800 Bedienungsanleitung

Allen-Bradley

Allen-Bradley MicroLogix 1000 Bedienungsanleitung

Allen-Bradley

Allen-Bradley 20A Bedienungsanleitung

Allen-Bradley

Allen-Bradley ControlLogix 5570 Bedienungsanleitung

Allen-Bradley

Allen-Bradley PowerFlex 70 Bedienungsanleitung

Allen-Bradley

Allen-Bradley PowerFlex 523 Bedienungsanleitung

Allen-Bradley

Allen-Bradley PowerFlex 525 Bedienungsanleitung

Allen-Bradley

Allen-Bradley powerflex 700 Bedienungsanleitung

Allen-Bradley

Allen-Bradley MicroLogix 1200 Bedienungsanleitung

Allen-Bradley

Allen-Bradley SLC 500 Series Bedienungsanleitung

Allen-Bradley

Allen-Bradley 1747-PBASE Betriebsanleitung

Allen-Bradley

Allen-Bradley SLC 500 Bedienungsanleitung

Allen-Bradley

Allen-Bradley Studio 5000 Logix Emulate Betriebsanleitung

Allen-Bradley

Allen-Bradley 1756-CN2/B Bedienungsanleitung

Allen-Bradley

Allen-Bradley 1756 GuardLogix Bedienungsanleitung

Allen-Bradley

Allen-Bradley 1756 ControlLogix Bedienungsanleitung

Allen-Bradley

Allen-Bradley PowerFlex 70 Bedienungsanleitung

Allen-Bradley

Allen-Bradley 2080-IQ4 Bedienungsanleitung

Allen-Bradley

Allen-Bradley PowerFlex 755TL Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung

KUHN

KUHN TKS Bedienungsanleitung

S&C

S&C PMH Bedienungs- und Wartungshandbuch