Allen + Roth LWSCSC Bedienungsanleitung

welcoming • sophisticated • inspiring

Serial Number Purchase Date

Questions, problems, missing parts? Before returning to your retailer, call our customer

service department at 1-866-439-9800, 8 a.m. - 8 p.m., EST, Monday - Friday.

ATTACH YOUR RECEIPT HERE

ITEM #5130289, 5130290

MODEL # LWSCSC，LWSCSBW

Français p. 22

Español p. 43

Wood Closet Kit

allen + roth®is a registered trademark

WARNING

UNIT MUST BE PERMANENTLY FASTENED TO THE WALL WITH PROVIDED HARDWARE; THIS

STORAGE UNIT IS NOT DESIGNED OR INTENDED FOR FREESTANDING USE.

TABLE OF CONTENTS

Camlock System Operation............................................................................................... 2

Package Contents............................................................................................................... 3

Hardware Contents...............................................................................................................4

Safety Information............................................................................................................... 6

Preparation ......................................................................................................................... 6

Assembly Instructions......................................................................................................... 7

Care and Maintenance ....................................................................................................... 17

Troubleshooting...................................................................................................................17

Warranty..............................................................................................................................19

Replacement Parts List ...................................................................................................... 19

PACKAGE CONTENTS

PART DESCRIPTION QUANTITY

AHutch Panel Left 1

B Hutch Panel Right 1

C Hutch Panel Top 1

D Hutch Panel Back 1

E Front Curved Stretcher 1

F Front Straight Stretcher 1

G Adjustable Shelf 1

H Base Panel Left 1

I Base Panel Right 1

J Base Panel Top 1

K Base Panel Back 1

L Base Panel Bottom 1

M Shoe shelf 1

N Wire stopper 1

PART DESCRIPTION QUANTITY

O Wall Hanging Cleat 2

P Drawer Front 1

Q Drawer Panel Left 1

R Drawer Panel Right 1

S Drawer Back 1

T Drawer Bottom 1

U Slide 2

V Long Shelf 2

W Installation Template 1

X 22 mm Metal Pole 3

Y25 mm Metal Pole 3

CAM LOCK SYSTEM OPERATION

1. Screw cam bolts into the predrilled small holes on panel.

2. Insert cam lock into predrilled large hole on panel.

3. Make sure the arrow on the cam lock is pointed toward the cam bolts.

4. Connect both panels together, making sure cam bolts goes into predrilled hole on

the end of panel with cam lock.

5. Once cam bolts is connected inside cam lock, take Phillips screwdriver and tighten

cam lock clockwise.

DETAIL A DETAIL B

THREADED

INSERT

LOCKED POSITION

PANELPANEL

Cam Bolts

CAM LOCK

HARDWARE CONTENTS (shown not actual size)

1/4 x 1-1/4 in.

Bolt

Qty. 12

Lock

Washer

Qty. 12

Flat

Washer

Qty. 12

Large

Cam Lock

Qty. 30

Medium

Cam Bolt

Qty. 26

Small

Cam Lock

Qty. 4

Small

Cam Bolt

Qty. 4

Large

Wood Dowel

Qty. 30

AA BB CC DD EE

FF GG HH II JJ

Small

Wood Dowel

Qty. 8

M6 x 10 mm

Screw

Qty. 4

KK LL MM NN

OO RR

M4 x 38 mm

Wood Screw

Qty. 17

M4 x 25 mm

Wood Screw

Qty. 4

M4 x 14 mm

Wood Screw

Qty. 33

M3.5 x 12 mm

Wood Screw

Qty. 6

Shelf Pin

Qty. 8

PP QQ

M8 x 2-1/2 in.

Lag Bolt

Qty. 4

Large Flat

Washer

Qty. 4

Wall Anchor

Qty. 8

HARDWARE CONTENTS (shown not actual size)

L - Bracket

Qty. 8

Drawer Handle

Qty. 1

Barrel Nut

Qty. 4

Large

Cam Bolt

Qty. 4

M4 Allen

Wrench

Qty. 1

SS TT UU VV

WW XX

Touch-up Pen

Qty. 1

(not included for Item

#5130290)

Open Pole

Holder

Qty. 3

Closed

Pole Holder

Qty. 3

YY ZZ

M4 x 15 mm

Self-tapping Screw

Qty. 6

ASSEMBLY INSTRUCTIONS

Hardware Used

1. Press the release lever on slides (U) and

remove the slide runner.

2. Attach slides (U) to base panel left (H) and base panel

right (I), securing with M6 x 10 mm screws (JJ). Then,

insert medium cam bolts (EE) into base panel left (H),

base panel right (I) and base panel top (J).

3. Attach base panel back (K) and base panel top (J) to

assembly using large wood dowels (HH) and large cam

lock (DD).

Note: Make sure previously inserted medium

cam bolts (EE) are completely seated.

Medium Cam Bolt

Large Cam Lock

x 12

x 2

PREPARATION

SAFETY INFORMATION

WARNING

CAUTION

Please read and understand this entire manual before attempting to assemble, operate or install

the product.

Before beginning assembly of product, make sure all parts are present. Compare parts with package

contents list and hardware contents list. If any part is missing or damaged, do not attempt to

assemble the product.

Estimated Assembly Time: 120 minutes

Tools Required for Assembly (not included): Phillips Screwdriver, Power Drill, 3/16 in. Drill Bit, 3/8 in.

Drill Bit, 1/2 in. Socket Wrench, Level, Stud Finder, Marking Pencil, Tape Measure, Step Ladder, and

Hammer

UNIT IS INTENDED FOR USE ONLY WITH MAXIMUM WEIGHTS INDICATED.

OVERLOADING STORAGE UNIT WITH PRODUCTS HEAVIER THAN MAXIMUM

WEIGHT MAY RESULT IN INJURY. DISTRIBUTE ANY WEIGHT IN UNITS EVENLY.

• Shelf maximum load: 30 lbs

• Pole maximum load: 40 lbs.

• Pole maximum length: 60 in.

• Do not allow children to climb or play in or around this product.

• To avoid damage, assemble the product on a sturdy, level and protective surface.

• Two or more persons must work together to install the unit onto the wall.

• Make sure all bolts/screws are tightly fastened before the unit is used.

• Check bolts/screws periodically and tighten them if necessary.

• Unit must be permanently fastened to the wall with provided hardware; this storage unit

is not designed or intended for freestanding use.

• Use this unit for its intended purpose only.

• Do not use shelves as step ladder.

Release Lever UP

M6 x 10 mm Screw x 4

Large Wood Dowel x 2

Back Side

Base Assembly

8 9

ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS

Hardware Used

Hardware Used Hardware Used

Hardware Used

4. Attach base panel right (I) to assembly using large

wood dowels (HH) and large cam locks (DD).

Note: Make sure previously inserted medium cam bolts

(EE) are completely seated.

7. Attach base panel left (H) to assembly using large

wood dowels (HH) and large cam locks (DD).

Note: Make sure previously inserted medium cam bolts

(EE) are completely seated.

5. From the back of the assembly, attach base panel

right (I) to base panel back (K) using at washers (CC),

lock washers (BB), bolts (AA) and large cam locks (DD).

Tighten with Allen wrench (WW).

8. From the back of the assembly, attach base panel left

(H) to base panel back (K) using at washers (CC), lock

washers (BB), bolts (AA) and large cam locks (DD).

Tighten with Allen wrench (WW).

6. Fit base panel back (K) into slot of base panel bottom

(L), then attach base panel bottom (L) to assembly using

large wood dowels (HH) and large cam locks (DD).

Note: Make sure previously inserted medium cam bolts

(EE) are completely seated.

9. Insert medium cam bolts (EE) into hutch panel left (A),

hutch panel right (B) and hutch panel top (C).

4 7

5 8

6 9

Bolt x 3

AA J

Back Side

Large Cam Lock x 2

Large Wood Dowel x 3

Lock Washer x 3

Flat Washer x 3

Large Cam Lock x 1

Large Cam Lock x 2

Large Wood Dowel x 2

Large Cam Lock x 4

Large Wood Dowel x 5

JDD

Back Side

Bolt x 3

Lock Washer x 3

Flat Washer x 3

Large Cam Lock x 1

Medium Cam Bolt x 14

Allen Wrench x 1

Hutch Assembly

10 11

ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS

Hardware Used

10. Attach hutch panel left (A) and hutch panel right (B) to

hutch panel back (D) and either front curved stretcher (E)

or front straight stretcher (F) -- depending on which ts

your closet look -- using large wood dowels (HH) and large

cam locks (DD). From the back of the assembly, use at

washers (CC), lock washers (BB) and bolts (AA) to secure

unit. Tighten with Allen wrench (WW).

Then, secure assembly with large cam locks (DD).

Note: Make sure previously inserted medium cam bolts

(EE) are completely seated.

12. Carefully rest hutch assembly on its side. Insert

barrel nuts (VV) and large cam bolts (UU) into the

bottom of the hutch assembly.

13. Insert large wood dowels (HH) and large cam locks

(DD) into the base panel top (J). Then, with the help of

another person, attach the hutch assembly to the base

assembly, tightening the large cam locks (DD) to secure

the unit.

Note: Make sure previously inserted large cam bolts (UU)

are completely seated.

11. Insert large wood dowels (HH) and large cam locks

(DD) into hutch assembly. Attach hutch panel top (C),

tightening large cam locks (DD) to secure assembly.

14. Install small cam bolts (GG) into drawer front (P).

Set aside. Install small wood dowels (II) into drawer

back panel (S), then attach drawer left panel (R) and

drawer right panel (Q) to drawer back panel (S) with

M4 x 25 mm wood screws (LL).

10 12

11 14

Bolt x 6

Back Side

Lock Washer x 6

Flat Washer x 6

Large Cam Lock x 6

Large Cam Lock x 8

Large Wood Dowel x 8

Large Cam Bolt x 4

Barrel Nut x 4

Base

Small Cam Bolt x 4

BB CC

DD A

Back Side

Large Wood Dowel x 6

Hutch

Large Cam Lock x 4

Large Wood Dowel x 4

II LL

Small Wood Dowel x 4

M4 x 25 mm Wood

Screw

x 4

Allen Wrench x 1

Drawer Assembly

12 13

ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS

Hardware Used

15. Insert drawer bottom panel (T) into drawer left

panel (R), drawer right panel (Q) and drawer back

panel (S).

18. Insert the drawer into the assembly by pressing

down the release levers on the slide runners and

sliding the drawer into the tracks of slides (U).

17. Attach the previously removed slide runners (Step

1, page 7) to drawer left panel (Q) and drawer right

panel (R) with M3.5 x 12 mm wood screws (NN). Then,

remove preassembled bolt from handle (TT). Insert

drawer handle (TT) into drawer front (P), securing with

previously removed bolt.

M3.5 x 12 mm

Wood Screw

x 6

Drawer Handle and

Bolts

x 1

Finished surface

Hardware Used

16. Insert small wood dowels (II) into drawer left

panel (R) and drawer right panel (Q). Attach drawer

front (P), securing with small cam locks (FF).

Small Cam Lock x 4

Small Wood Dowel x 4

Hutch

Base

19. Using a stud nder, locate the edges of the wood

studs. Find the center line of each stud and draw a

vertical reference line on the wall over each one. Position

installation template (W) at desired location on wall.

Note: The bottom of the installation template (W) should

be no less than 31-1/2 in. from the oor.

Mark mounting holes with a pencil (not included) and

discard installation template (W). Drill 3/16 in. pilot holes at

marked locations. Then, with the beveled edge facing up,

attach the wall hanging cleats (O) with large at washers

(QQ) and lag bolts (PP).

39-1/2 in.

Minimum 31-1/2 in.

16 in.

Wall Hanging Installation

Hardware Used

x 4

M8 x 2-1/2 in. Lag Bolt

Large Flat Washer

14 15

ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS

21. With a pencil, draw a level line at the desired

mounting location for long shelves (V). Using L-brack-

ets (SS) as a guide, mark the screw hole locations with

a pencil. Drill 3/8 in. diameter pilot holes at least 2-1/2

in. deep at marked locations, then insert wall anchors

(RR) into the holes until they are ush with the wall.

Attach L-brackets (SS) to the wall using M4 x 38 mm

screws (KK) and to the long shelf (V) using M4 x 14

wood screws (MM).

22. Attach long shelves (V) to hutch panel left (A) and

hutch panel right (B) with L-brackets (SS), securing

with M4 x 14 mm wood screws (MM).

20. With the help from another person, carefully

hang the unit onto wall hanging cleat (O). 20

Hardware Used

Wall Anchor

L-Bracket

M4 x 38 mm Screw

M4 x 14 mm Wood Screw

x 8

x 4

x 8

Hardware Used

L-Bracket

M4 x 14 mm Wood Screw

x 4

x 16

Long Shelf Installation 21

Note: If long shelf (V) needs cut to t inside your closet

space, cut only one side of the shelf and do not use

a hacksaw. It is recommended you hire an insured

remodeler for this type of installation.

Hardware Used

23. Insert 22 mm metal poles (X) into 25 mm metal

poles (Y). Using closed pole holders (ZZ) as a guide,

mark screw hole locations with a pencil. Drill 3/8 in.

diameter pilot holes at least 2-1/2 in. deep at marked

locations, then insert drywall anchors (not included) into

the holes. Attach closed pole holders (ZZ) with

M4 x 38 mm screws (KK). Insert 25 mm metal poles (Y)

into closed pole holders (ZZ), securing with

M4 x 15 mm self-tapping screws (AB).

Note: Drywall anchors are not required if installing into a

stud.

23 Y

Drywall Anchor

M4 x 38 mm Screw

Closed Pole Holder

M4 x 15 mm Self-tapping Screw

x 9

x 3

Pole Installation

16 17

ASSEMBLY INSTRUCTIONS

Hardware Used

24. Attach open pole holders (YY) to hutch panel

left (A) and hutch panel right (B), securing with M4

x 14 mm wood screws (MM). Insert 22 mm metal

poles (X) into open pole holders (YY), securing with

M4 x 15 mm self-tapping screws (AB).

25. Insert shelf pins (OO) where desired in cabinet,insert

Wire stopper (N) in shoe shelf (M),then rest adjustable

shelf (G) and shoe shelf (M) on the closet.

Note: Ensure the shelf pins (OO) are level.

Shelf pin x 8

MM YY

M4 x 15 mm Self-tapping Screw

M4 x 14 mm Wood Screw

Open Pole Holder

x 3

x 9

x 3

CARE AND MAINTENANCE

• Periodically check to make certain all components are properly positioned, free from damage and

rmly connected.

• Use a soft, clean cloth that will not scratch the surface when dusting.

• Never use water to clean the furniture as it may cause damage to the nish.

• Wipe clean using a damp cloth and a mild cleaner. Wipe dry with a clean cloth.

• In the event that the furniture is stained or otherwise damaged during use, it is recommended you

call a professional to repair the furniture.

• Keep furniture away from direct sunlight as it may damage the nish.

• It is best to keep the furniture in a climate-controlled environment. Extreme temperature and

humidity changes can cause fading, warping, shrinking and splitting of wood.

• Touch-up pen (XX) has been provided (except in Item #5130290) to repair any small nicks or

scratches that may occur during assembly or shipping.

• If Item #5130290 is damaged and touch-up is required please apply a quality wood

polish to the damaged surface. Polish not included with this item.

TROUBLESHOOTING

PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION

One end of long

shelf (V) is oating.

The closet space is larger than

8 ft.

1. Buy corresponding shelf bracket and

wall bracket (sold separately).

2. Replace long shelf (V) with a longer

shelf of a similar nish and style.

Long shelf (V) can

not be installed

inside the closet.

The closet space is smaller

than 8 ft.

1.Shorten one side of the long shelf (V). Hire

an insured remodeler for installation.

2. Replace long shelf (V) with a shorter shelf

of a similar nish and style.

The shelf is tilting. The wall brackets and shelf

brackets are not installed at

the same level.

Use a quality level to ensure the brackets

are leveled with each other.

Drawer slide

runner can not

slide into slide

tracks.

Slide runners reversed. Reinstall the slide runner and ensure the

opening of slide runner is pointing backward.

Drawer slides do

not go smoothly.

The slide runners do not align

with the slide tracks properly.

Take out and repeat drawer installation.

Drawer gaps are

not even.

Slide runners are not level with

each other.

Use the pilot holes on the tower as a guide

to level the slide runners.

Adjustable Shelf Installation

TROUBLESHOOTING

PART DESCRIPTION PART #

A Hutch Panel Left 00LWSCSC/LWSCSBW-1

B Hutch Panel Right 00LWSCSC/LWSCSBW-2

CHutch Panel Top 00LWSCSC/LWSCSBW-3

D Hutch Panel Back 00LWSCSC/LWSCSBW-4

E Front Curved Stretcher 00LWSCSC/LWSCSBW-5

F Front Straight Stretcher 00LWSCSC/LWSCSBW-6

G Adjustable Shelf 00LWSCSC/LWSCSBW-7

H Base Panel Left 00LWSCSC/LWSCSBW-8

I Base Panel Right 00LWSCSC/LWSCSBW-9

JBase Panel Top 00LWSCSC/LWSCSBW-10

K Base Panel Back 00LWSCSC/LWSCSBW-11

L Base Panel Bottom 00LWSCSC/LWSCSBW-12

M Shoe shelf 00LWSCSC/LWSCSBW-13

N Wire stopper 00LWSCSC/LWSCSBW-14

O Wall Hanging Cleat 00LWSCSC/LWSCSBW-15

P Drawer Front 00LWSCSC/LWSCSBW-16

Q Drawer Panel Left 00LWSCSC/LWSCSBW-17

R Drawer Panel Right 00LWSCSC/LWSCSBW-18

S Drawer Back 00LWSCSC/LWSCSBW-19

T Drawer Bottom 00LWSCSC/LWSCSBW-20

U Slide 00LWSCSC/LWSCSBW-21

V Long Shelf 00LWSCSC/LWSCSBW-22

WInstallation Template 00LWSCSC/LWSCSBW-23

WARRANTY

REPLACEMENT PARTS LIST

This product (exclusive of shelves) is warranted to the original purchaser. If there is a failure in

this unit due to defects in materials or workmanship, the manufacturer will repair or replace this

item at our discretion without charge. Warranty is void if product has been assembled incorrectly,

misused, abused by overloading, altered in any way or damaged due to accident. This warranty is

not transferable and does not cover chipping, aking, scratches, rust, dents, or other damages to

the surfaces of this product. Responsibility of the manufacturer is limited to repair or replacement of

this product. The manufacturer is not responsible for consequential, incidental, or other damages or

losses resulting from product failure.

This warranty is in lieu of all other expressed warranties. Some states do not allow the exclusion or

limitation of incidental or consequential damages, so the above limitation may not apply to you. This

warranty gives you specic legal rights and you may have other rights which vary from state to state.

For replacement parts, call our customer service department at 1-866-439-9800, 8 a.m. - 8 p.m., EST,

Monday - Friday.

PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION

One end of metal pole

does not rest properly

onto the open pole

holder (YY).

The opening of open pole holder

does not face upward vertically.

Use a quality level to ensure the at

edge of the open pole holder is level

while installing.

The pole kit is tilting. The open and closed pole

holders are not installed at the

same level.

Use a quality level to ensure the pole

holders are level with each other.

Screw went through

side panel.

Used M4 x 38 mm wood screws

for attaching pole holder onto

the side of cabinet.

Use M4 x 14 mm wood screws.

Closet tower tilted. The wall hanging cleats are not

level.

Reinstall the wall hanging cleats and

ensure they are level.

Closet tower can not

hang on the wall.

The mounting hole locations are

not correct.

Reinstall wall hanging cleats; make

sure the space between two wall

hanging cleats is 39-1/2 in. and the

bottom two mounting holes location is

no less than 31-1/2 in. from the oor.

Dieses Handbuch passt für folgende Modelle

Andere Allen + Roth Inneneinrichtung Handbücher

Allen + Roth

Allen + Roth BENTON RIDGE CH1934WA Bedienungsanleitung

Allen + Roth

Allen + Roth ROWAN 1815WC-24-201 Bedienungsanleitung

Allen + Roth

Allen + Roth 1227VA-36-201 Bedienungsanleitung

Allen + Roth

Allen + Roth 52052 Bedienungsanleitung

Allen + Roth

Allen + Roth SUCO Bedienungsanleitung

Allen + Roth

Allen + Roth CLARITA 60W Bedienungsanleitung

Allen + Roth

Allen + Roth 1412VA-60-201-925 Bedienungsanleitung

Allen + Roth

Allen + Roth LG-4236-ET-B-1 Bedienungsanleitung

Allen + Roth

Allen + Roth MW-8711-LC-S 0878050 Bedienungsanleitung

Allen + Roth

Allen + Roth L-DN2397SAL-C Bedienungsanleitung

Allen + Roth

Allen + Roth 9481124 Bedienungsanleitung

Allen + Roth

Allen + Roth 1694VA-48-241-900-UM Bedienungsanleitung

Allen + Roth

Allen + Roth LWSWMSW Bedienungsanleitung

Allen + Roth

Allen + Roth FR4589 Bedienungsanleitung

Allen + Roth

Allen + Roth LG-2156-DRT Bedienungsanleitung

Allen + Roth

Allen + Roth WSLDKFP1J Bedienungsanleitung

Allen + Roth

Allen + Roth SANFORD 60W Bedienungsanleitung

Allen + Roth

Allen + Roth 0731353 Bedienungsanleitung

Allen + Roth

Allen + Roth BV-6333-60 Bedienungsanleitung

Allen + Roth

Allen + Roth Roveland 2026VA-30-201-900-SR Bedienungsanleitung

Allen + Roth

Allen + Roth CRESTHILL 1541MR-28-201 Bedienungsanleitung

Allen + Roth

Allen + Roth 1888VA-30-274 Bedienungsanleitung

Allen + Roth

Allen + Roth WSWS-VSK1648-1C Bedienungsanleitung

Allen + Roth

Allen + Roth WSLVS1621-1J Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung