Alliance Laundry Systems A Series Betriebsanleitung

Programming

www.comlaundry.com

Washer-Extractors

Cabinet Hardmount

A-Series Microcomputer

Prep for Coin, MDC Card Reader

and Central Remote Pay

2 Speed and Variable-Speed

Refer to Page 7 for Model Identification

CHM1759C

DOMESTIC MODELS

INTERNATIONAL MODELS

CHM1759C

Part No. F232197R4

July 2008

Keep These Instructions for Future Reference.

(If this machine changes ownership, this manual must accompany machine.)

F232197 1

means without the expressed written consent of the publisher.

Table of

Contents

Safety Information.............................................................................. 3

Explanation of Safety Messages........................................................... 3

Important Safety Instructions ............................................................... 3

Safety Decals ........................................................................................ 5

Operator Safety..................................................................................... 6

Introduction......................................................................................... 7

Model Identification ............................................................................. 7

Nameplate Location.............................................................................. 8

Replacement Parts ................................................................................ 8

Customer Service.................................................................................. 8

Electronic Control Unit......................................................................... 9

Control Output Fuse Board................................................................... 9

Harnessing........................................................................................ 9

Communications................................................................................... 9

Central Pay System .......................................................................... 9

Third Party Card Reader .................................................................. 9

Download Device ................................................................................. 9

Programming ...................................................................................... 11

Entering Program Mode ....................................................................... 11

Determining Firmware ID Code........................................................... 11

Setup Mode for Coin and Central Remote Pay Models ....................... 12

Setup Mode for Card Reader Models ................................................... 15

Audit Mode (For Card Reader Models With Firmware

ID Code“A2CM” and “AVCM”)....................................................... 16

Audit Mode (For Coin or Central Pay Models With Firmware

ID Code “A2d9”, “A2di” and “Avd9”).............................................. 18

Audit Mode (For Earlier Coin and Central Pay Models) ..................... 20

Special Promotional Pricing Mode....................................................... 22

Rapid Advance (For Coin and Central Remote Pay Models

With Firmware ID Code “A2d9”, A2di” and “Avd9”)...................... 23

Enabling Rapid Advance ................................................................. 23

Programming Cycle Segments ............................................................. 23

Control Panel ........................................................................................ 24

Cycle Step Options ............................................................................... 26

Vend Step......................................................................................... 26

Agitation Cycle Step ........................................................................ 26

Wash 1 (Extra Wash) – Wash 4 Cycle Steps (Displayed as

USH1 – USH4)............................................................................... 26

Rinse 1 – Rinse 4 (Rinse 3 is Extra Rinse on Domestic Models)

Cycle Steps (Displayed as rIn1 – rIn4) .......................................... 27

Cycle Step Options ............................................................................... 28

Vend Step......................................................................................... 28

Agitation Cycle Step ........................................................................ 28

Wash 1 (Extra Wash) – Wash 4 Cycle Steps (Displayed as

USH1 – USH4)............................................................................... 28

Rinse 1 – Rinse 4 (Rinse 3 is Extra Rinse on Domestic Models)

Cycle Steps (Displayed as rIn1 – rIn4) .......................................... 29

2F232197

To Edit an Entire Wash Cycle Formula................................................ 30

Vend Amount................................................................................... 30

Agitation for the Cycle..................................................................... 30

Wash 1 – Wash 4 ............................................................................. 31

Rinse 1 – Rinse 4 ............................................................................. 32

Abnormal Conditions............................................................................ 33

Door Will Not Lock ......................................................................... 33

Door Will Not Unlock ..................................................................... 33

Door Open During Operation .......................................................... 33

Excessive Fill Time.......................................................................... 33

Drain Error (For Coin and Central Remote Pay Models with

Firmware ID Code “A2d9”, “A2di”and “Avd9”) .......................... 33

Out-of-Balance (Variable-Speed Models Only) .............................. 33

Clogged Filter (Inverter Drive Models Only).................................. 34

On Board Battery Problem............................................................... 34

Temperature Probe Malfunction ...................................................... 34

Time Countdown Stops During Cycle............................................. 34

Test Cycle ............................................................................................. 34

Permanent Factory Diagnostic Test Cycle....................................... 35

Cycle Charts.......................................................................................... 37

Default Washer-Extractor Settings ....................................................... 41

Domestic Default Settings ............................................................... 41

International Default Settings .......................................................... 41

F232197 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

Safety Information

Explanation of Safety Messages

Precautionary statements (“DANGER,” “WARNING,”

and “CAUTION”), followed by specific instructions,

are found in this manual and on machine decals. These

precautions are intended for the personal safety of the

operator, user, servicer, and those maintaining the

machine.

Additional precautionary statements (“IMPORTANT”

and “NOTE”) are followed by specific instructions.

IMPORTANT: The word “IMPORTANT” is used

to inform the reader of specific procedures where

minor machine damage will occur if the procedure

is not followed.

IMPORTANT: The word “NOTE” is used to

communicate installation, operation, maintenance

or servicing information that is important but not

hazard related.

Important Safety Instructions

1. Read all instructions before using the washer.

2. Refer to the GROUNDING INSTRUCTIONS in

the INSTALLATION MANUAL for the proper

grounding of the washer.

3. Do not wash textiles that have been previously

cleaned in, washed in, soaked in, or spotted with

gasoline, kerosene, waxes, cooking oils, dry-

cleaning solvents, or other flammable or

explosive substances as they give off vapors that

could ignite or explode.

4. Do not add gasoline, dry-cleaning solvents, or

other flammable or explosive substances to the

wash water. These substances give off vapors that

could ignite or explode.

5. Under certain conditions, hydrogen gas may be

produced in a hot water system that has not been

used for two weeks or more. HYDROGEN GAS

IS EXPLOSIVE. If the hot water system has not

been used for such a period, before using a

washing machine or combination washer-dryer,

turn on all hot water faucets and let the water

flow from each for several minutes. This will

release any accumulated hydrogen gas. The gas is

flammable; do not smoke or use an open flame

during this time.

6. Do not allow children to play on or in the washer.

Close supervision of children is necessary when

the washer is used near children. This is a safety

rule for all appliances.

7. Before the washer is removed from service or

discarded, remove the door to the washing

compartment.

8. Do not reach into the washer if the wash drum is

moving.

DANGER indicates the presence of a

hazard that will cause severe personal

injury, death, or substantial property

damage if the danger is ignored.

DANGER

WARNING indicates the presence of a

hazard that can cause severe personal

injury, death, or substantial property

damage if the warning is ignored.

WARNING

CAUTION indicates the presence of a

hazard that will or can cause minor

personal injury or property damage if the

caution is ignored.

CAUTION

To reduce the risk of fire, electric shock,

serious injury or death to persons when

using your washer, follow these basic

precautions: W023

WARNING

Safety Information

F232197

4© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

9. Do not install or store the washer where it will be

exposed to water and/or weather.

10. Do not tamper with the controls.

11. Do not repair or replace any part of the washer, or

attempt any servicing unless specifically

recommended in the user-maintenance

instructions or in published user-repair

instructions that the user understands and has the

skills to carry out.

12. To reduce the risk of an electric shock or fire, DO

NOT use an extension cord or an adapter to

connect the washer to the electrical power source.

13. Use washer only for its intended purpose,

washing textiles.

14. Never wash machine parts or automotove parts in

the machine. This could result in serious damage

to the basket.

15. ALWAYS disconnect the washer from electrical

supply before attempting any service. Disconnect

the power cord by grasping the plug, not the cord.

16. Install the washer according to the

INSTALLATION INSTRUCTIONS. All

connections for water, drain, electrical power and

grounding must comply with local codes and be

made by licensed personnel when required.

17. To reduce the risk of fire, textiles which have

traces of any flammable substances such as

vegetable oil, cooking oil, machine oil,

flammable chemicals, thinner, etc. or anything

containing wax or chemicals such as in mops and

cleaning cloths, must not be put into the washer.

These flammable substances may cause the

fabric to catch on fire by itself.

18. Do not use fabric softeners or products to

eliminate static unless recommended by the

manufacturer of the fabric softener or product.

19. Keep washer in good condition. Bumping or

dropping the washer can damage safety features.

If this occurs, have washer checked by a qualified

service person.

20. If the supply cord is damaged, it must be replaced

by a special cord or assembly available from the

manufacturer or its service agent.

21. Be sure water connections have a shut-off valve

and that fill hose connections are tight. CLOSE

the shut-off valves at the end of each wash day.

22. Loading door MUST BE CLOSED any time the

washer is to fill, tumble or spin. DO NOT bypass

the loading door switch by permitting the washer

to operate with the loading door open.

23. Always read and follow manufacturer’s

instructions on packages of laundry and cleaning

aids. Heed all warnings or precautions. To reduce

the risk of poisoning or chemical burns, keep

them out of the reach of children at all times

(preferably in a locked cabinet).

24. Always follow the fabric care instructions

supplied by the textile manufacturer.

25. Never operate the washer with any guards and/or

panels removed.

26. DO NOT operate the washer with missing or

broken parts.

27. DO NOT bypass any safety devices.

28. Failure to install, maintain, and/or operate this

washer according to the manufacturer’s

instructions may result in conditions which can

produce bodily injury and/or property damage.

NOTE: The WARNINGS and IMPORTANT

SAFETY INSTRUCTIONS appearing in this

manual are not meant to cover all possible

conditions and situations that may occur. Common

sense, caution and care must be exercised when

installing, maintaining, or operating the washer.

Any problems or conditions not understood should be

reported to the dealer, distributor, service agent or the

manufacturer.

Safety Information

F232197 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

IMPORTANT: Ensure that the recommended

clearances for inspection and maintenance

are provided. Never allow the inspection and

maintenance space to be blocked.

Safety Decals

Safety decals appear at crucial locations on the

machine. Failure to maintain legible safety decals

could result in injury to the operator or service

technician.

To provide personal safety and keep the machine in

proper working order, follow all maintenance and

safety procedures presented in this manual. If

questions regarding safety arise, contact the

manufacturer immediately.

Use manufacturer-authorized spare parts to avoid

safety hazards.

This machine must be installed, adjusted,

and serviced by qualified electrical

maintenance personnel familiar with the

construction and operation of this type of

machinery. They must also be familiar

with the potential hazards involved.

Failure to observe this warning may result

in personal injury and/or equipment

damage, and may void the warranty. SW004

WARNING

Install the machine on a level floor of

sufficient strength. Failure to do so may

result in conditions which can produce

serious injury, death and/or property

damage. W703

WARNING

Be careful around the open door,

particularly when loading from a level

below the door. Impact with door edges

can cause personal injury. SW025

CAUTION

Never touch internal or external steam

pipes, connections, or components.

These surfaces can be extremely hot and

will cause severe burns. The steam must

be turned off and the pipe, connections,

and components allowed to cool before

the pipe can be touched. SW014

WARNING

Safety Information

F232197

6© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

Operator Safety

To ensure the safety of machine operators, the

following maintenance checks must be performed

daily:

1. Prior to operating the machine, verify that all

warning signs are present and legible. Missing or

illegible signs must be replaced immediately.

Make certain that spares are available.

2. Check door interlock before starting operation of

the machine:

a. Attempt to start the machine with the door

open. The machine should not start with the

door open.

b. Close the door without locking it and attempt

to start the machine. The machine should not

start with the door unlocked.

c. Close and lock the door and start a cycle.

Attempt to open the door while the cycle is in

progress. The door should not open.

If the door lock and interlock are not functioning

properly, call a service technician.

3. Do not attempt to operate the machine if any of

the following conditions are present:

a. The door does not remain securely locked

during the entire cycle.

b. Excessively high water level is evident.

c. Machine is not connected to a properly

grounded circuit.

Do not bypass any safety devices in the machine.

NEVER insert hands or objects into

basket until it has completely stopped.

Doing so could result in serious injury.

SW012

WARNING

Never operate the machine with a

bypassed or disconnected balance

system. Operating the machine with

severe out-of-balance loads could result

in personal injury and serious equipment

damage. SW039

WARNING

F232197 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

Introduction

Model Identification

Information in this manual is applicable to these models:

HC20AC2 HC25AY2 HC40AL2 HC60AX2 SC20AC2 SC25AY2 SC40AL2 SC60AX2

HC20ACV HC30AC2 HC40AX2 HC60AXF SC20ACV SC30AC2 SC40AX2 SC60AXF

HC20AL2 HC30ACV HC40AY2 HC60AY2 SC20AL2 SC30ACV SC40AY2 SC60AY2

HC20AX2 HC30AL2 HC40AYV HC60AYF SC20AX2 SC30AL2 SC40AYV SC60AYF

HC20AY2 HC30AX2 HC60AC2 HC60AYV SC20AY2 SC30AX2 SC60AC2 SC60AYV

HC20AYV HC30AY2 HC60ACF HC80ACV SC20AYV SC30AY2 SC60ACF SC80ACV

HC25AC2 HC30AYV HC60ACV HC80ALV SC25AC2 SC30AYV SC60ACV SC80ALV

HC25AL2 HC40AC2 HC60AL2 HC80AXV SC25AL2 SC40AC2 SC60AL2 SC80AXV

HC25AX2 HC40ACV HC60ALF HC80AYV SC25AX2 SC40ACV SC60ALF SC80AYV

Introduction

F232197

Nameplate Location

The nameplate is located at the rear of the machine and

inside door. Always provide the machine’s serial

number and model number when ordering parts or

when seeking technical assistance.

Figure 1

Replacement Parts

If literature or replacement parts are required, contact

the source from whom the machine was purchased or

contact Alliance Laundry Systems at (920) 748-3950

for the name and address of the nearest authorized

parts distributor.

Customer Service

For technical assistance, call (920) 748-3121

Ripon, Wisconsin.

CHM167R

1Nameplate

CHM167R

Inhaltsverzeichnis

Andere Alliance Laundry Systems Waschmaschine Handbücher

Alliance Laundry Systems

Alliance Laundry Systems HX Bedienungsanleitung

Alliance Laundry Systems

Alliance Laundry Systems Cygnus Ultra Pro Betriebsanleitung

Alliance Laundry Systems

Alliance Laundry Systems HFNBCF Betriebsanleitung

Alliance Laundry Systems

Alliance Laundry Systems LWS45M series Bedienungsanleitung

Alliance Laundry Systems

Alliance Laundry Systems EA2011-3000 Bedienungsanleitung

Alliance Laundry Systems

Alliance Laundry Systems Speed Queen LWN311SP101NW22 Bedienungsanleitung

Alliance Laundry Systems

Alliance Laundry Systems NX18BVPA7 Fehlerbehebungshandbuch

Alliance Laundry Systems

Alliance Laundry Systems UW35P2 Bedienungsanleitung

Alliance Laundry Systems

Alliance Laundry Systems BA4121 Montageanleitung

Alliance Laundry Systems

Alliance Laundry Systems 802753R4 Bedienungsanleitung

Alliance Laundry Systems

Alliance Laundry Systems FLW1526C Original Betriebsanleitung

Alliance Laundry Systems

Alliance Laundry Systems HWNLX2SP111CW01 Betriebsanleitung

Alliance Laundry Systems

Alliance Laundry Systems UW150PV Series Programmierhandbuch

Alliance Laundry Systems

Alliance Laundry Systems 802749R2 Bedienungsanleitung

Alliance Laundry Systems

Alliance Laundry Systems W446I Leitfaden

Alliance Laundry Systems

Alliance Laundry Systems 33 Installationsanleitung

Alliance Laundry Systems

Alliance Laundry Systems TR7104WN Bedienungsanleitung

Alliance Laundry Systems

Alliance Laundry Systems UW POCKET HARDMOUNT UW35B2 Betriebsanleitung

Alliance Laundry Systems

Alliance Laundry Systems H370I Bedienungsanleitung

Alliance Laundry Systems

Alliance Laundry Systems Speed Queen TLW24C-SVG1 Bedienungsanleitung

Alliance Laundry Systems

Alliance Laundry Systems Speed Queen TC5000WN Bedienungsanleitung

Alliance Laundry Systems

Alliance Laundry Systems UW POCKET HARDMOUNT UW35B2 Bedienungsanleitung

Alliance Laundry Systems

Alliance Laundry Systems BF35PV Wartungs- und Serviceanleitung

Alliance Laundry Systems

Alliance Laundry Systems TC5102WN Bedienungsanleitung

Beliebte Waschmaschine Handbücher anderer Marken

Tricity Bendix

Tricity Bendix AW 1000 W Produkthandbuch

Panasonic

Panasonic NA-F60L5WRB Bedienungsanleitung

GE WSLP1500 Handbuch

Electrolux

Electrolux EWF1284EDW Bedienungsanleitung

Bosch

Bosch WAN2829BSN Bedienungsanleitung

LG TV2516DV3B Bedienungsanleitung

LG TH2517DSAV Bedienungsanleitung

VESTEL

VESTEL CMH-XL 7510 TE Bedienungsanleitung

AEG

AEG 74335 Bedienungsanleitung

Johnson

Johnson JWF721A Bedienungsanleitung

Beko

Beko WTE7604XLW0 Bedienungsanleitung

Danby

Danby DTT100A1WDB Montageanleitung

Amica

Amica WA 14 Ex Bedienungsanleitung

Daewoo

Daewoo DWD-F1222 Bedienungsanleitung

Bosch

Bosch WAS28461AU Bedienungsanleitung

Miele

Miele PW 6080 Vario Bedienungsanleitung

Finlux

Finlux FLX108CF220 Bedienungsanleitung

Whirlpool

Whirlpool 3LBR5132AN0 Bedienungsanleitung