Altec Lansing InMotion iM616 Bedienungsanleitung

USER GUIDE

CAUTION

Consult a physician or audiologist if you have excessive ear wax, difficulty inserting

the eartips, or discomfort after prolonged use.

inMotion earphones exclude most external sounds

even at low listening levels. It is unsafe to use insert

earphones while driving a motorized vehicle,

operating machinery, bicycling or jogging, because

you may not be alerted to potential danger.

Do not use the earphones at excessively loud levels.

Noise-induced hearing loss is a function of exposure time, the average sound level

and the peak of very loud sounds. Decreased listening levels allow for longer periods

of safe listening time.

ENGLISH

PROPER CARE

•Do not expose earphones to extreme temperatures.

•Avoid dropping or strong impact. Extreme shock can damage the earphones.

•Always leave an eartip on the earphone for shock protection.

•Perspiration entering the nozzle may cause the earphone to temporarily stop

working. Normal operation usually returns after the earphone dries out.

•Do not pull on the cord to remove it from the jack or the ear.

•Clean or replace the eartips prior to use by others.

•Replace disposable foam eartips regularly.

•Earwax buildup can reduce the earphone output. When the filters become

clogged they should be replaced. See Changing Filters.

ENGLISH

CONTENTS:

•inMotion earphones

•1pair white 3-flange eartips

•1pair foam eartips

•1pair replacement filters

•Filter changing tool

•Deluxe carry case

EARTIPS

In addition to flanged eartips, inMotion

earphones are supplied with disposable

foam eartips. Both types provide excellent

sound reproduction when properly

inserted. If the earphones seem to lack bass, insert the eartip deeper

into the ear canal to obtain a better seal, or try the foam eartip option.

ENGLISH

Flanged eartips

These reusable eartips should be cleaned regularly.

Cleaning the flanged eartips

1. Carefully remove the eartip from the earphone.

2. Use water and mild soap to remove dirt and earwax.

3. Rinse and completely dry the eartip.

4. With a slight twisting motion, push the eartip on the stem until it fits securely.

Foam eartips

•Disposable foam eartips compress to form a tight seal that holds the earphones

firmly in place.

•The eartips at the end of the earphones can be replaced by sliding them off and

on. A combination of twisting and pulling is recommended for eartip removal.

ENGLISH

EARTIP INSERTION

Flanged eartip insertion

•For best results, moisten the flanged eartip

before insertion.

•Carefully insert one earphone at a time while

pulling up and out on the back of the ear. The

earphone should seal deeply and comfortably

in the ear canal.

Foam eartip insertion

•Use a foam eartip if a good seal cannot be

obtained with a flanged eartip.

•Compress the foam at the end of the earphone by rolling it between your thumb

and forefinger before inserting it. Hold the eartip in place for about 5 seconds

while the foam expands to create a tight seal in the ear canal.

ENGLISH

REMOVAL

Remove earphones slowly with a twisting motion to gradually break the seal. Do not

pull on the cords to remove earphones.

iM716 CONTROLLER MODE SWITCH SETTINGS

“Bass” Position — Emphasizes low frequency and overall volume. Excellent setting

for aggressive, bass-enhanced playback.

“HD” High Definition Audio Position — Produces a flat, non-colored frequency

response. Excellent setting for the audiophile purist.

ENGLISH

FILTERS

inMotion earphones have special filters that smooth the frequency response and

prevent earwax from entering the earphones. These filters are located at the tip of

the earphone and are visible when the eartip is removed. If the filters become

clogged they should be replaced. A dirty filter will reduce earphone output. The

frequency with which the filters need to be changed will vary widely among users.

The filters should be changed if the volume decreases or the sound quality declines.

Note: Once removed, the filters are not reusable.

Additional replacement filters and tools are available from

www.alteclansing.com/inmotionearphones

ENGLISH

CHANGING FILTERS

Filter Removal

1. Remove eartip. Note the red plastic ring with a light pink filter in the center.

2. With a slow twisting motion, firmly push the sharp tip of the filter tool into the

center of the filter.

3. Pull out on the entire filter and red ring.

ENGLISH

Filter Replacement

1. With your fingers, put the narrow end of a new filter into the end of the

earphone. Be careful to put the open end in first so that the light pink filter can

be seen at the tip of the earphone. Gently push on the filter and snap it into the

earphone. You should feel and hear it snap in place.

2. Add the eartip back onto the earphone.

ENGLISH

Andere Handbücher für inMotion iM616

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Altec Lansing Kopfhörer Handbücher

Altec Lansing

Altec Lansing MZW300 Bedienungsanleitung

Altec Lansing

Altec Lansing A13357 R01 USAS HP SAFUE INS Bedienungsanleitung

Altec Lansing

Altec Lansing MZX399 Bedienungsanleitung

Altec Lansing

Altec Lansing AHP 612 Bedienungsanleitung

Altec Lansing

Altec Lansing Earphones Bedienungsanleitung

Altec Lansing

Altec Lansing MZX856 Bedienungsanleitung

Altec Lansing

Altec Lansing inMotion iM616 Bedienungsanleitung

Altec Lansing

Altec Lansing Muzx MHP216 Bedienungsanleitung

Altec Lansing

Altec Lansing TRACK-FIT Bedienungsanleitung

Altec Lansing

Altec Lansing MZX008 Bedienungsanleitung

Altec Lansing

Altec Lansing CHP524 Bedienungsanleitung

Altec Lansing

Altec Lansing MZW100 Bedienungsanleitung

Altec Lansing

Altec Lansing BackBeat 903 Bedienungsanleitung

Altec Lansing

Altec Lansing EVOLUTION II Bedienungsanleitung

Altec Lansing

Altec Lansing BackBeat Classic UHP106 Bedienungsanleitung

Altec Lansing

Altec Lansing BackBeat 903 Bedienungsanleitung

Altec Lansing

Altec Lansing ALCORA Bedienungsanleitung

Altec Lansing

Altec Lansing MZX201 Bedienungsanleitung

Altec Lansing

Altec Lansing LUX MZX757 Bedienungsanleitung

Altec Lansing

Altec Lansing MZW101 Bedienungsanleitung

Altec Lansing

Altec Lansing MZX499 Bedienungsanleitung

Altec Lansing

Altec Lansing MZW300 Bedienungsanleitung

Altec Lansing

Altec Lansing AHP 612 Bedienungsanleitung

Altec Lansing

Altec Lansing Hydrabuds MZX6000 Bedienungsanleitung

Beliebte Kopfhörer Handbücher anderer Marken

Sony

Sony MDR-NC8 Bedienungsanleitung

AUSounds

AUSounds AU-Stream Bedienungsanleitung

ENERGY SISTEM

ENERGY SISTEM Style 7 Bedienungsanleitung

Philips

Philips SHE3622 Bedienungsanleitung

Insignia

Insignia NS-CAHBTSPORT Bedienungsanleitung

Movie Vision

Movie Vision HP-400 Bedienungsanleitung

MobiFren

MobiFren SM Pro Bedienungsanleitung

Motorola solutions

Motorola solutions PMLN8120 Bedienungsanleitung

Jaybird

Jaybird freedom Installationsanleitung

Sony

Sony MDR-ED12LP Bedienungsanleitung

HiFuture

HiFuture Tidy Buds Pro Bedienungsanleitung

Creative

Creative CB2530 Bedienungsanleitung

Renkforce

Renkforce RF FTVK-100 Bedienungsanleitung

Philips

Philips SHQ3000 Bedienungsanleitung

Sennheiser

Sennheiser 500371 Bedienungsanleitung

Califone

Califone 2924AV Bedienungsanleitung

Philips

Philips EARGEAR HE205 Series Bedienungsanleitung

Technics

Technics EAH-AZ80 Bedienungsanleitung