1
Poseidon_GB01
Construction B
Frame
The frame is built of Ø25mm steel pipes. One nozzle can be stored on each side of the machine.
2,Ø250mmwheelsand1,Ø100mmswivelwheelaremountedtotheframe.
A bent bar is attached to the front of the frame to protect hose attachments. The bar is also used for lifting the
machineboth manually and by crane.
Thebackbarisequippedwith fixtures for mounting hose reel, a U-bar for placing nozzles, and winding reel for
electrical cable.
The steering handle is made of plastic.
Cabinet
Thecabinetismadeofvacuum-shapedplastic.
On the cabinet’s top side there is room for storing small auxiliary articles.
All hoses are connected through the hole at the front of the cabinet.
Motor/pump
Themotor/pumpunitisattachedtotheframewithfourtaptitescrewsintheelectricmotor’sstator.This
waythepumpcanbeaccessedfromthefrontofthemachine,andthosepartsofthepumpsusceptible
towearare easilyserviced.
Thepumpisa4-cylinderaxialpistonpumpwithawobblediscsystemandsolidceramicpistons.Suction
andpressurevalvesaremadeofstainlesssteel.
The oil system is closed, and the oil level can be checked through a liquid indicator on the side of the
cabinet.
Thepump’swaterconnectionis mounted using ¾” quick-acting coupling.
The pump’s pressure outlet is mounted with a 3/8”quick-acting coupling
nipple.
Thepumppressurecanbereadinbars(CPA)onanadaptedpressuregauge.
Start/stop system
Themachine’sstart/stopsystemiscontrolledbyamicroprocessorthatstops/interruptsthesignalfrom
areedswitch.Thereedswitchisactivatedbytheflowofamagneticpistonmountedinthepumpoutlet’s
flowcontrolthroughthepump.
The start switch has 3 settings:
0= Machine stopped.
I= Aut. start/stop. Machine stopped with automatic stop function if the spray handle is not activated
after20seconds.
Man=Manuel.Machinestartedinmanualposition. Themachinestops automatically,however,ifthe
spray handle is not activated after 5 minutes.
Use the manual position if the machine is set to suction without water inlet pressure.
